381 research outputs found

    A KrF-laser excited by a capacitively coupled longitudinal discharge

    Get PDF
    The performance of a KrF excimer laser, excited by a discharge produced in a quartz tube between two metallic electrodes at its end and the inner tube wall serving as a dielectric electrode, is described. The dielectric electrode is capacitively coupled to a metallic electrode surrounding the quartz tube coaxially. Laser output energies up to 0.9 mJ in pulses having a duration of 6 ns FWHM could be obtained at a driving voltage of 100 kV

    A study of the electron quenching of excimers in a KrF* laser excited by a coaxial electron beam

    Get PDF
    Measurements of the output energy, the optical pulse length and the build-up time of the laser pulse, obtained with a coaxially e-beam pumped KrF* laser, were performed varying the total gas fill pressure, the F2 content and the e-beam current from 1–5 bar, 0.1–0.8% and 13.3–26.6 kA, respectively. The maximum specific extraction energy amounts to 64 J/l. The large range of measurements, especially at low F2 concentrations, reveals the necessity to extend the kinetics of the F2 chain in the usual computer model. With the introduction of electron quenching of KrF* and ArF* by dissociative attachment the predictions are also for low F2 concentration in agreement with experiments

    Design Perspective on the Role of Advanced Bots for Self-Guided Learning

    Get PDF
    Virtual worlds are rapidly gaining acceptance in educational settings; with bots play an important role in these environments to help learners. Authentic learning can be significantly supported by bots to help self-guided learning in authentic tasks. in this paper, we investigate what is stopping educators from making more use of bots as a valuable resource and how these barriers can be overcome. This exploratory research uses interviews with six educators, who use educational bots. We show that while the experts have 'big plans' for bot use, the current educational implementations are 'low-level' and restrictive in their application. There is further confusion about appropriate pedagogical models and how to use them effectively as more than 'prompters' or 'extras'. While creation- and control-technologies are advancing, allowing use of bots as a 'hard technology' to guide learners through routine procedures; there is a lack of resources for automation as intelligence technologies are slower to develop and may required future partnerships with external parties before they are available useable by general educators

    New Landscapes and New Eyes: The Role of Virtual World Design for Supply Chain Education

    Get PDF
    With the common availability of advanced educational technology, we are able to increase the emphasis on the design of learning experiences and benefit from the given flexibility and variety of opportunities to create learning spaces. As instructional design models become more commonplace we examine their role vis-à-vis with the fidelity of the experience while learning. High-fidelity experiences are known to be valuable in learning as they provide authenticity in learning and motivation; yet, high fidelity comes at the cost of greater investment. In this paper, we outline our experiments with two setups of differing levels of fidelity: using Second Life and the consumer-focused Oculus Rift Head-Mounted Display (HMD). We show qualitatively interpreted comments and user responses to demonstrate importance of the level of fidelity, uncover important elements, and relate back the fidelity to the learning experience. High-fidelity experiences can be supported by software and hardware that are now readily available but present the seductive opportunity to greatly improve participant engagement in the virtual environments presented

    Some Secrets of Fluorescent Proteins: Distinct Bleaching in Various Mounting Fluids and Photoactivation of cyan fluorescent proteins at YFP-Excitation

    Get PDF
    Background
The use of spectrally distinct variants of green fluorescent protein (GFP) such as cyan or yellow mutants (CFP and YFP, respectively) is very common in all different fields of life sciences, e.g. for marking specific proteins or cells or to determine protein interactions. In the latter case, the quantum physical phenomenon of fluorescence resonance energy transfer (FRET) is exploited by specific microscopy techniques to visualize proximity of proteins.

Methodology/Principal Findings
When we applied a commonly used FRET microscopy technique - the increase in donor (CFP)-fluorescence after bleaching of acceptor fluorophores (YFP), we obtained good signals in live cells, but very weak signals for the same samples after fixation and mounting in commercial microscopy mounting fluids. This observation could be traced back to much faster bleaching of CFP in these mounting media. Strikingly, the opposite effect of the mounting fluid was observed for YFP and also for other proteins such as Cerulean, TFP or Venus. The changes in photostability of CFP and YFP were not caused by the fixation but directly dependent on the mounting fluid. Furthermore we made the interesting observation that the CFP-fluorescence intensity increases by about 10 - 15% after illumination at the YFP-excitation wavelength – a phenomenon, which was also observed for Cerulean. This photoactivation of cyan fluorescent proteins at the YFP-excitation can cause false-positive signals in the FRET-microscopy technique that is based on bleaching of a yellow FRET acceptor.

Conclusions/Significance
Our results show that photostability of fluorescent proteins differs significantly for various media and that CFP bleaches significantly faster in commercial mounting fluids, while the opposite is observed for YFP and some other proteins. Moreover, we show that the FRET microscopy technique that is based on bleaching of the YFP is prone to artifacts due to photoactivation of cyan fluorescent proteins under these conditions

    Formation and quenching mechanisms of the electron beam pumped (XeRb)+ ionic excimer in different buffer gases

    Get PDF
    The ionic excimer molecule XeRb+ is formed in an electron beam excited gas mixture of Xe, Rb, and a buffer gas. The formation and quenching mechanisms of ionic excimers are investigated by measuring the XeRb+fluorescence as a function of the gas composition and gas pressure. The formation of XeRb+ is achieved by a three‐body association reaction between Xe+, Rb, and a buffer gas atom. For the buffer gases He, Ne, or Ar the values of the important formationrate constants are determined from the observed fluorescence signal decay

    Why do GPs hesitate to refer diabetes patients to a self-management education program: a qualitative study

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Self-management support is seen as a cornerstone of good diabetes care and many countries are currently engaged in initiatives to integrate self-management support in primary care. Concerning the organisation of these programs, evidence is growing that engagement of health care professionals, in particular of GPs, is critical for successful application. This paper reports on a study exploring why a substantial number of GPs was (initially) reluctant to refer patients to a self-management education program in Belgium.</p> <p>Methods</p> <p>Qualitative analysis of semi-structured face-to-face interviews with a purposive sample of 20 GPs who were not regular users of the service. The Greenhalgh diffusion of innovation framework was used as background and organising framework.</p> <p>Results</p> <p>Several barriers, linked to different components of the Greenhalgh model, emerged from the interview data. One of the most striking ones was the limited readiness for innovation among GPs. Feelings of fear of further fragmentation of diabetes care and frustration and insecurity regarding their own role in diabetes care prevented them from engaging in the innovation process. GPs needed time to be reassured that the program respects their role and has an added value to usual care. Once GPs considered referring patients, it was not clear enough which of their patients would benefit from the program. Some GPs expressed the need for training in motivational skills, so that they could better motivate their patients to participate. A practical but often mentioned barrier was the distance to the centre where the program was delivered. Further, uncertainty about continuity interfered with the uptake of the offer.</p> <p>Conclusions</p> <p>The study results contribute to a better understanding of the reasons why GPs hesitate to refer patients to a self-management education program. First of all, the role of GPs and other health care providers in diabetes care needs to be clarified before introducing new functions. Feelings of security and a basic trust of providers in the health system are a prerequisite for participation in care innovation. Moreover, some important lessons regarding the implementation of an education program in primary care have been learned from the study.</p
    corecore