107 research outputs found
Circuit Training Improves the Levels of β-Amyloid and Brain-Derived Neurotrophic Factor Related to Cognitive Impairment Risk Factors in Obese Elderly Korean Women
Background: The purpose of this study was to investigate the effect of circuit training on β-amyloid, BDNF, and cognitive function in untrained obese elderly Korean women. Methods: The subjects for the study were aged 65–70 years and were each assigned to a circuit training group (EG, n = 12) or a control group (CG, n = 11). The 60 min combined exercise was performed 3 times per week for 16 weeks. The exercise intensity was progressively increased from a 40% heart rate reserve to a 70% heart rate reserve. The test data were analyzed using a paired t-test, an independent t-test, and a two-way repeated measures ANOVA, and an alpha level of 0.05 was set for all tests of significance. Results: Group-by-time interaction effects were observed for β-amyloid (p \u3c 0.05), brain-derived neurotrophic factor (p \u3c 0.01), and cognitive function (p \u3c 0.05). Within the exercise group, significant differences were found in β-amyloid (p \u3c 0.05), brain-derived neurotrophic factor (p \u3c 0.001), and cognitive function (p \u3c 0.05) when comparing across different time points. Additionally, there were statistically significant differences between groups in post-exercise β-amyloid (p \u3c 0.05), change in β-amyloid (p \u3c 0.05), brain-derived neurotrophic factor (p \u3c 0.01), and cognitive function (p \u3c 0.05). Conclusions: Therefore, it is suggested that the circuit training used in this study could be an effective exercise method for improving the risk factors of cognitive impairment in obese elderly Korean women
Touch the Wind: Simultaneous Airflow, Drag and Interaction Sensing on a Multirotor
Disturbance estimation for Micro Aerial Vehicles (MAVs) is crucial for
robustness and safety. In this paper, we use novel, bio-inspired airflow
sensors to measure the airflow acting on a MAV, and we fuse this information in
an Unscented Kalman Filter (UKF) to simultaneously estimate the
three-dimensional wind vector, the drag force, and other interaction forces
(e.g. due to collisions, interaction with a human) acting on the robot. To this
end, we present and compare a fully model-based and a deep learning-based
strategy. The model-based approach considers the MAV and airflow sensor
dynamics and its interaction with the wind, while the deep learning-based
strategy uses a Long Short-Term Memory (LSTM) neural network to obtain an
estimate of the relative airflow, which is then fused in the proposed filter.
We validate our methods in hardware experiments, showing that we can accurately
estimate relative airflow of up to 4 m/s, and we can differentiate drag and
interaction force.Comment: The first two authors contributed equall
Material issues for nanoporous ultra low-k dielectrics
Using the molecularly designed porogen (pore generating agent) approach, novel nanoporous low-k materials with improved mechanical properties have been achieved based on poly(methylsilsesquioxane), PMSSQ, structure. Two different methods, microphase separation system and grafted porogen system, were adopted to realize nonporous ultra low-k dielectrics with superior mechanical properties. We found that the behavior of dielectric constant as well as thin film modulus depends on the molecular structure of a porogen. Within the decomposition temperature windows of grafted porogens, a low-k material with k 6 Gpa was achieved. These results indicate that it is possible to design and fabricate nanoporous thin films with balanced low dielectric constant and robust mechanical properties, which are highly desired for microelectronic industry.This work is
supported by the Collaborative Project for Excellence in
Basic System IC Technology. Financial supports from
the Ministry of Science and Technology (MOST) (the
National Research Laboratory Fund) and the Korean
Ministry of Education through the Brain Korea 21
Program are also greatly acknowledged
Effect of UV Pretreatment on the Nanopore Formation within Organosilicate Thin Films
We have investigated the low-temperature cure process to realize nanoporous organosilicate thin films at temperature below 150°C
by adding a small amount of photoacid generator PAG followed by UV irradiation. The Gemini surfactant, which decomposes
in the temperature range from 170 to 420°C, was used as a pore-generating material porogen for organosilicate matrix. The UV
pretreatment in the presence of PAG lowers the condensation temperature of poly methyl silsesquioxane matrix and leads to the
fast matrix vitrification enabling the addition of increased amount of porogens. Because the full vitrification of the matrix 150°C
by UV pretreatment in the presence of PAG below the decomposition temperature of porogens 170°C prevents the pore collapse,
the porosity up to 35.5% was achieved with an average pore size of 3.4 nm, as measured from X-ray reflectivity as well as
ellipsometric porosimetry. It is shown that both dielectric constant and refractive index continue to decrease to 2.0 and 1.26,
respectively. The present experimental system demonstrates that porogens with low degradation temperature can be successfully
incorporated to realize nanoporous films without pore collapse. Consequently, this process can widen the choice of porogens to
prepare nanoporous films.This work was supported by the NANO Systems Institute-National Core Research Center (NSI-NCRC) of the Korea Science and Engineering Foundation KOSEF , the Brain Korea 21 Program endorsed by the Ministry of Education of Korea, and System IC 2010 Project of Korea Ministry of Commerce, Industry and Energy
Strongly adhesive dry transfer technique for van der Waals heterostructure
That one can stack van der Waals materials with atomically sharp interfaces
has provided a new material platform of constructing heterostructures. The
technical challenge of mechanical stacking is picking up the exfoliated
atomically thin materials after mechanical exfoliation without chemical and
mechanical degradation. Chemically inert hexagonal boron nitride (hBN) has been
widely used for encapsulating and picking up vdW materials. However, due to the
relatively weak adhesion of hBN, assembling vdW heterostructures based on hBN
has been limited. We report a new dry transfer technique. We used two vdW
semiconductors (ZnPS3 and CrPS4) to pick up and encapsulate layers for vdW
heterostructures, which otherwise are known to be hard to fabricate. By
combining with optimized polycaprolactone (PCL) providing strong adhesion, we
demonstrated various vertical heterostructure devices, including quasi-2D
superconducting NbSe2 Josephson junctions with atomically clean interface. The
versatility of the PCL-based vdW stacking method provides a new route for
assembling complex 2D vdW materials without interfacial degradation.Comment: Accepted for publication in 2D Material
Editorial: Special issue on the challenges in environmental science and engineering: CESE-2012 9-13 September 2012, RACV City Club, Melbourne, Australia
This special issue carries selected peer-reviewed manuscripts based on the presentations made at CESE-2012, the Fifth Annual International Conference on Challenges in Environmental Science & Engineering , CESE Conference Series that was held from the 9th to the 13th of September 2012 at the RACV City Club in Melbourne, Australia
Generation of scale-free networks using a simple preferential rewiring dynamics
We propose a simple dynamical model that generates networks with power-law
degree distributions with the exponent 2 through rewiring only. At each time
step, two nodes, i and j, are randomly selected, and one incoming link to i is
redirected to j with the rewiring probability R, determined only by degrees of
two nodes, k_i and k_j, while giving preference to high-degree nodes. To take
the structure of networks into account, we also consider what types of networks
are of interest, whether links are directed or not, and how we choose a
rewiring link out of all incoming links to i, as a result, specifying 24
different cases of the model. We then observe numerically that networks will
evolve to steady states with power-law degree distributions when parameters of
the model satisfy certain conditions.Comment: 10 pages, 4 figure
The role of S100A4 for bone metastasis in prostate cancer cells
Background
Prostate cancers frequently metastasize to bone, where the best microenvironment for distant colonization is provided. Since osteotropic metastasis of prostate cancer is a critical determinant of patients survival, searches for preventive measures are ongoing in the field. Therefore, it is important to dissect the mechanisms of each step of bone metastasis, including the epithelial-mesenchymal transition (EMT) and cross-talk between metastatic niches and cancer cells.
Methods
In this study, we established a highly bone-metastatic subline of human prostate cancer cells by selecting bone-homing population of PC3 cells after cardiac injection of eight-week-old male BALB/c-nude mice. Then we assessed the proliferation, EMT characteristics, and migration properties of the subline (mtPC3) cells in comparison with the parental PC3 cells. To investigate the role of S100A4, we performed gene knock-down by lentiviral transduction, or treated cells with recombinant S100A4 protein or a S100A4-neutralizing antibody. The effect of cancer cells on osteoclastogenesis was evaluated after treatment of pre-osteoclasts with conditioned medium (CM) from cancer cells.
Results
The mtPC3 cells secreted a markedly high level of S100A4 protein and showed elevated cell proliferation and mesenchymal properties. The increased proliferation and EMT traits of mtPC3 cells was inhibited by S100A4 knock-down, but was not affected by exogenous S100A4. Furthermore, S100A4 released from mtPC3 cells stimulated osteoclast development via the cell surface receptor RAGE. Down-regulation or neutralization of S100A4 in the CM of mtPC3 cells attenuated cancer-induced osteoclastogenesis.
Conclusion
Altogether, our results suggest that intracellular S100A4 promotes cell proliferation and EMT characteristics in tumor cells, and that secreted S100A4 activates osteoclastogenesis, contributing to osteolytic bone metastasis. Thus, S100A4 upregulation in cancer cells highly metastatic to bone might be a key element in regulating bone metastasis.This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government MSIT (NRF-2020R1A2C2010082 and NRF-2018R1A5A2024418) to H.-H. Kim and by the National Research Foundation of Korea grant (NRF-2019R1A2C4070083) to H.J. Kim. The funding body has no role in the design of the study; collection, analysis, and interpretation of data; and in writing the manuscript
Recommended from our members
Trap-Assisted Charge Injection into Large Bandgap Polymer Semiconductors.
The trap-assisted charge injection in polyfluorene-poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) model systems with an Al or Al/LiF cathode is investigated. We find that inserting 1.3 nm LiF increases electron and hole injections simultaneously and the increase of holes is greater than electrons. The evolution of internal interfaces within polymer light-emitting diodes is observed by transmission electron microscopy, which reveals that the introduction of LiF improves the interface stability at both the cathode (cathode/polymer) and the anode (indium tin oxide (ITO)/PEDOT:PSS). Above-mentioned experimental results have been compared to the numerical simulations with a revised Davids model and potential physical mechanisms for the trap-assisted charge injection are discussed
Exciton-driven antiferromagnetic metal in a correlated van der Waals insulator
Collective excitations of bound electron-hole pairs -- known as excitons --
are ubiquitous in condensed matter, emerging in systems as diverse as band
semiconductors, molecular crystals, and proteins. Recently, their existence in
strongly correlated electron materials has attracted increasing interest due to
the excitons' unique coupling to spin and orbital degrees of freedom. The
non-equilibrium driving of such dressed quasiparticles offers a promising
platform for realizing unconventional many-body phenomena and phases beyond
thermodynamic equilibrium. Here, we achieve this in the van der Waals
correlated insulator NiPS by photoexciting its newly discovered
spin-orbit-entangled excitons that arise from Zhang-Rice states. By monitoring
the time evolution of the terahertz conductivity, we observe the coexistence of
itinerant carriers produced by exciton dissociation and the long-wavelength
antiferromagnetic magnon that coherently precesses in time. These results
demonstrate the emergence of a transient metallic state that preserves
long-range antiferromagnetism, a phase that cannot be reached by simply tuning
the temperature. More broadly, our findings open an avenue toward the
exciton-mediated optical manipulation of magnetism.Comment: 24 pages, 23 figure
- …