Multi-objective shop floor scheduling using monitored energy data

Modern factories will become more and more directly connected to intermittent energy sources like solar systems or wind turbines as part of a smart grid or a self-sufficient supply. However, solar systems or wind turbines are not able to provide a continuous energy supply over a certain time period. In order to enable an effective use of these intermittent energy sources without using temporary energy storages, it is necessary to rapidly and flexibly adapt the energy demand of the factory to the constantly changing requirements of the energy supply. The adaption of the energy demand to the intermittent supply results in different energy-related objectives for the production system of the factory, such as reducing energy consumption, avoiding power peaks, or achieving a power use within the available power supply. Shop Floor Scheduling can help to pursue these objectives within the production system. For this purpose, a solution methodology based on a meta-heuristic will be described for Flexible Job Shop Scheduling taking into account different energy- as well as productivity-related objectives

Treatment of necrotizing fasciitis using negative pressure wound therapy in a puppy

A two-month-old German shepherd dog was presented with anorexia, lethargy and left hind limb lameness associated with swelling of the thigh. Clinical findings combined with cytology led to the presumptive diagnosis of necrotizing fasciitis (NF). Extensive debridement was performed and silver-foam-based negative pressure wound therapy (NPWT) was applied. During the first 48 hours, a negative pressure of -75 mmHg was used. Evaluation of the wound demonstrated no progression of necrosis and a moderate amount of granulation tissue formation. A new dress- ing was placed and a second 48-hour cycle of NPWT was initiated at -125 mmHg. At removal, a healthy wound bed was observed and surgical closure was performed. The prompt implementation of NPWT following surgical debridement led to accelerated wound healing without progression of necrosis in this case of canine NF. Negative pressure wound therapy could become an integral part of the management strategy of canine NF, improving the prognosis of this life-threatening disease

Competitive Sustainable Globalization General Considerations and Perspectives

Globalization has essentially empowered both newly industrialized and early industrialized countries but also caused considerable global challenges on economic, environmental, and social stability. Trends and risks of globalization and sustainability are specified by reports of global stakeholders as IMF, OECD, UN and its related organizations, WEF, WTO, and WWF. Competitive Sustainable Globalization (CSG) is introduced as a new paradigm and as a means to cope with the respective challenges. Competitive Sustainable Manufacturing (CSM) can be a fundamental enabler for CSG, proposing a global as well as a local approach for manufacturing. Potentials of value creation by manufacturing with reference to business models, education, and innovation are presented

A Model for the Development of Sustainable Innovations for the Early Phase of the Innovation Process

Current industrial development is faced by the global challenge to meet the continuously growing demand for capital and consumer goods in emerging countries while simultaneously ensuring a sustainable industrial growth in the social, environmental and economic dimension. By means of market dynamics of cooperation and competition in global value creation and knowledge networks, innovations geared towards sustainability can be essential drivers for realizing a sustainable development. The targeted development of new sustainable innovations is consequently a key activity in order to move towards sustainable industrial growth. This paper will describe a model for the development of sustainable innovations. The model focuses on idea generation in the early phase of the innovations process, addressing the fuzzy front end of innovation. In this context, specific goals and principles of sustainable development are integrated into a problem-solving approach. This integrated approach is subsequently used as a foundation for the targeted development of sustainable innovations in the frame of a workshop concept

Advancing Use of Key Integrated Pest Management Practices in Schools

Since 2011, Oregon State University has conducted integrated pest management (IPM) training specific to public schools. School personnel receive onsite training on key IPM practices as well as associated materials. To determine which practices and materials school employees are using as a result of the program, we administered a survey to 2016 training attendees. We found that all returning attendees had been implementing practices and using materials as a result of the training. The most common practice was sealing holes to keep pests out. Additionally, the majority of respondents reported a reduction in pesticide use. Our approach may serve as a reference for Extension specialists in developing school IPM programs in other states

Controlled modification of the inorganic and organic bricks in an Al-based MOF by direct and post-synthetic synthesis routes

Four new porous CAU-1 derivatives CAU-1–NH2 ([Al4(OH)2(OCH3)4(BDC–NH2)3]·xH2O, BDC–NH22− = aminoterephthalate), CAU-1–NH2(OH) ([Al4(OH)6(BDC–NH2)3]·xH2O), CAU-1–NHCH3 ([Al4(OH)2(OCH3)4(BDC–NHCH3)3]·xH2O) and CAU-1–NHCOCH3 ([Al4(OH)2(OCH3)4(BDC–NHCOCH3)3]·xH2O) all containing an octameric [Al8(OH)4+y(OCH3)8−y]12+ cluster, with y = 0–8, have been obtained by MW-assisted synthesis and post-synthetic modification. The inorganic as well as the organic unit can be modified. Heteronuclear 1H–15N, 1H–13C and homonuclear 1H–1H connectivities determined by solid-state NMR spectroscopy prove the methylation of the NH2 groups when conventional heating is used. Varying reaction times and temperatures allow controlling the degree of methylation of the amino groups. Short reaction times lead to non-methylated CAU-1 (CAU-1–NH2), while longer reaction times result in CAU-1–NHCH3. CAU-1–NH2 can be modified chemically by using acetic anhydride, and the acetamide derivative CAU-1–NHCOCH3 is obtained. Thermal treatment permits us to change the composition of the Al-containing unit. Methoxy groups are gradually exchanged by hydroxy groups at 190 °C in air. Solid-state NMR spectra unequivocally demonstrate the presence of the amino groups, as well as the successful post-synthetic modification. Furthermore 1H–1H correlation spectra using homonuclear decoupling allow the orientation of the NHCOCH3 groups within the pores to be unravelled. The influence of time and temperature on the synthesis of CAU-1 was studied by X-ray powder diffraction, elemental analyses, and 1H liquid-state NMR and IR spectroscopy