Self-gravitating spheres of anisotropic fluid in geodesic flow

The fluid models mentioned in the title are classified. All characteristics of the fluid are expressed through a master potential, satisfying an ordinary second order differential equation. Different constraints are imposed on this core of relations, finding new solutions and deriving the classical results for perfect fluids and dust as particular cases. Many uncharged and charged anisotropic solutions, all conformally flat and some uniform density solutions are found. A number of solutions with linear equation among the two pressures are derived, including the case of vanishing tangential pressure.Comment: 21 page

Production of Ethylene From Ethanol Dehydration Over H3PO4-Modified Cerium Oxide Catalysts = Penghasilan Etilena Daripada Pendehidratan Etanol Dengan Mangkin Serium Oksida Terubahsuai H3PO4

Production of ethylene from ethanol dehydration was investigated over H3PO4 (10 wt.% to 30wt.%)-modified cerium oxide catalysts synthesized by wet impregnation technique. The prepared catalysts were characterized using scanning electron microscope (SEM), N2 adsorption-desorption method, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) for the physicochemical properties. The ethanol catalytic dehydration was carried out in a fixed-bed reactor at 673-773 K and at ethanol partial pressure of 33 kPa. The effects of phosphorus loading on catalyst and reaction temperatures were investigated in terms of catalytic activity towards product selectivity and yield. Overall, the selectivity and yield of ethylene increased with the temperature and phosphorus loading. The highest ethylene selectivity and yield were 99% and 65%, respectively, at 773 K and 33 kPa over the 30 wt.% H3PO4-modified cerium oxide

Nanometer-scale patterning and individual current-controlled lithography using multiple scanning probes

Cataloged from PDF version of article.Scanning probe lithography(SPL) is capable of sub-30-nm-patterning resolution and nanometer-scale alignment registration, suggesting it might provide a solution to the semiconductor industry’s lithography challenges. However, SPL throughput is significantly lower than conventional lithography techniques. Low throughput most limits the widespread use of SPL for high resolution patterning applications. This article addresses the speed constraints for reliable patterning of organic resists. Electrons field emitted from a sharp probe tip are used to expose the resist. Finite tip-sample capacitance limits the bandwidth of current-controlled lithography in which the tip-sample voltage bias is varied to maintain a fixed emission current during exposure. We have introduced a capacitance compensation scheme to ensure continuous resist exposure of SAL601 polymerresist at scan speeds up to 1 mm/s. We also demonstrate parallel resist exposure with two tips, where the emission current from each tip is individually controlled. Simultaneous patterning with multiple tips may make SPL a viable technology for high resolution lithography. © 1999 American Institute of Physic

Large Area Roller Embossing of Multilayered Ceramic Green Composites

In this paper, we will report our achievements in developing large area patterning of multilayered ceramic green composites using roller embossing. The aim of our research is to pattern large area ceramic green composites using a modified roller laminating apparatus, which is compatible with screen printing machines, for integration of embossing and screen printing. The instrumentation of our roller embossing apparatus, as shown in Figure1, consists of roller 1 and rollers 2. Roller 1 is heated up to the desired embossing temperature ; roller 2 is, however, kept at room temperature. The mould is a nickel template manufactured by plating nickel-based micro patterns (height : 50 $\mu$m) on a nickel film (thickness : 70 $\mu$m) ; the substrate for the roller embossing is a multilayered Heraeus Heralock HL 2000 ceramic green composite. Comparing with the conventional simultaneous embossing, the advantages of roller embossing include : (1) low embossing force ; (2) easiness of demoulding ; (3) localized area in contact with heater ; and etc. We have demonstrated the capability of large area roller embossing with a panel size of 150mmx 150mm on the mentioned substrate. We have explored and confirmed the impact of parameters (feed speed, temperature of roller and applied pressure) to the pattern quality of roller embossing. Furthermore, under the optimized process parameters, we characterized the variations of pattern dimension over the panel area, and calculated a scaling factor in order to make the panel compatible with other processes. Figure 2 shows the embossed patterns on a 150mmx 150mm green ceramic panel.Comment: Submitted on behalf of EDA Publishing Association (http://irevues.inist.fr/handle/2042/16838

Production of photons by the parametric resonance in the dynamical Casimir effect

We calculate the number of photons produced by the parametric resonance in a cavity with vibrating walls. We consider the case that the frequency of vibrating wall is $n \omega_1 (n=1,2,3,...)$ which is a generalization of other works considering only $2 \omega_1$, where $\omega_1$ is the fundamental-mode frequency of the electromagnetic field in the cavity. For the calculation of time-evolution of quantum fields, we introduce a new method which is borrowed from the time-dependent perturbation theory of the usual quantum mechanics. This perturbation method makes it possible to calculate the photon number for any $n$ and to observe clearly the effect of the parametric resonance.Comment: 15 pages, RevTeX, no figure

Catalytic Performance of Commercial Zeolites Y as Catalyst for Ethylene Production from Ethanol Dehydration

Catalytic dehydration of ethanol into ethylene was studied over commercial Zeolites-Y with different Si:Al ratios between 5.1:1 and 80:1, and temperature from 573 K to 773 K. The physicochemical properties of fresh and spent catalyst of Zeolite Y Si:Al 80:1 (best performing catalyst) were investigated using N2-physisorption, TGA, SEM-EDX, NH3-TPD, FTIR and XRD. Results showed that catalysts with higher Si:Al ratios exhibit better catalytic performance in terms of higher ethanol conversion and higher selectivity to ethylene. Indeed, zeolites-Y with Si:Al ratio 5.1:1 and 12:1 demonstrated low catalytic activity with ethanol conversion of 34% and 2%, respectively. However, ethylene selectivity of NH3-Y (5) was 84%, which was considerably higher than NH3-Y (12) which was 26%, indicated that this catalyst was not promoting the formation of other hydrocarbons i.e. methane and ethane. Albeit all of the catalysts namely H-Y (30), H-Y (60) and H-Y (80) showed favorable performance in ethanol dehydration, H-Y (80) attained almost total selectivity to ethylene and highest conversion of 73.0% among all the tested catalysts