28,521 research outputs found
Cell surface localization of tissue transglutaminase is dependent on a fibronectin-binding site in its N-terminal beta-sandwich domain
Increasing evidence indicates that tissue transglutaminase (tTG) plays a role in the assembly and remodeling of extracellular matrices and promotes cell adhesion. Using an inducible system we have previously shown that tTG associates with the extracellular matrix deposited by stably transfected 3T3 fibroblasts overexpressing the enzyme. We now show by confocal microscopy that tTG colocalizes with pericellular fibronectin in these cells, and by immunogold electron microscopy that the two proteins are found in clusters at the cell surface. Expression vectors encoding the full-length tTG or a N-terminal truncated tTG lacking the proposed fibronectin-binding site (fused to the bacterial reporter enzyme β-galactosidase) were generated to characterize the role of fibronectin in sequestration of tTG in the pericellular matrix. Enzyme-linked immunosorbent assay style procedures using extracts of transiently transfected COS-7 cells and immobilized fibronectin showed that the truncation abolished fibronectin binding. Similarly, the association of tTG with the pericellular matrix of cells in suspension or with the extracellular matrix deposited by cell monolayers was prevented by the truncation. These results demonstrate that tTG binds to the pericellular fibronectin coat of cells via its N-terminal β-sandwich domain and that this interaction is crucial for cell surface association of tTG
The effect of inertia and vertical confinement on the flow past a circular cylinder in a Hele-Shaw configuration
The Poiseuille flow (centreline velocity Uc ) of a fluid (kinematic viscosity ν ) past a circular cylinder (radius R ) in a Hele-Shaw cell (height 2h ) is traditionally characterised by a Stokes flow ( Λ=(UcR/ν)(h/R)2≪1 ) through a thin gap ( ϵ=h/R≪1 ). In this work we use asymptotic methods and direct numerical simulations to explore the parameter space Λ – ϵ when these conditions are not met. Starting with the Navier–Stokes equations and increasing Λ (which corresponds to increasing inertial effects), four successive regimes are identified, namely the linear regime, nonlinear regimes I and II in the boundary layer (the ‘ inner’ region) and a nonlinear regime III in both the inner and outer region. Flow phenomena are studied with extensive comparisons made between reduced calculations, direct numerical simulations and previous analytical work. For ϵ=0.01 , the limiting condition for a steady flow as Λ is increased is the instability of the Poiseuille flow. However, for larger ϵ , this limit is at a much higher Λ , resulting in a laminar separation bubble, of size O(h) , forming for a certain range of ϵ at the back of the cylinder, where the azimuthal location was dependent on ϵ . As ϵ is increased to approximately 0.5, the secondary flow becomes increasingly confined adjacent to the sidewalls. The results of the analysis and numerical simulations are summarised in a plot of the parameter space Λ – ϵ
Airfoil trailing-edge noise and drag reduction at a moderate Reynolds number using wavy geometries
This study utilizes a hybrid aeroacoustic model to investigate how airfoils with spanwise wavy geometries can be used to reduce trailing-edge noise alongside improving the aerodynamic performance. A smooth airfoil is compared to four variants, which have spanwise surface waves of different wavelengths, at a Reynolds number of Re = 64 000 and an angle-of-attack of 1°. The first three variants have a geometry modified by a single wavelength, whereas the fourth has a surface composed of two wavelengths, which creates a more irregular surface variation. The results show that modest noise reductions of around 4 dB are achieved for the first three variants, but a much larger reduction of 17.7 dB is achieved for the fourth variant. The mechanisms behind the noise reduction are explored, and it is shown that the geometry reduces the spanwise correlation of the pressure fluctuations and also modifies the boundary layer dynamics, which contributes to the large reduction. It is further shown that a wavy geometry can reduce the drag force by reducing the shear stress over parts of the airfoil surface and by limiting the flow separation on the suction side. The fourth variant is also assessed across a wider range of angles ([Formula: see text]) and is shown to produce less noise than the smooth wing across the entire range as well as a drag reduction for [Formula: see text]
Uniform white light distribution with low loss from coloured LEDs using polymer doped polymer mixing rods
Colour mixing of red, green and blue (RGB) LEDs is demonstrated for a 6 cm long PMMA cylindrical rod with a transparent refractive index matched micro particle (TRIMM) diffuser sheet at the output end. Ray tracing simulations have been performed, and the output light distributions, transmittances and losses modelled and compared with experiment. Photographed and modelled colour mixing results are presented for rods with and without TRIMM sheet mixers. The TRIMM particles homogenize the light output of plain PMMA rods to form white light, with negligible backscattering. A simple method for measuring the concentration of the particles in the diffuser sheet is described, and computer modeling and analysis of TRIMM particle systems is discussed
Recommended from our members
The influence of submesoscales and vertical mixing on the export of sinking tracers in large-eddy simulations
AbstractWe use idealized large-eddy simulations (LES) and a simple analytical theory to study the influence of submesoscales on the concentration and export of sinking particles from the mixed layer. We find that restratification of the mixed layer following the development of submesoscales reduces the rate of vertical mixing which, in turn, enhances the export rate associated with gravitational settling. For a neutral tracer initially confined to the mixed layer, subinertial (submesoscale) motions enhance the downward tracer flux, consistent with previous studies. However, the sign of the advective flux associated with the concentration of sinking particles reverses, indicating reentrainment into the mixed layer. A new theory is developed to model the gravitational settling flux when the particle concentration is nonuniform. The theory broadly agrees with the LES results and allows us to extend the analysis to a wider range of parameters.</jats:p
On the flow past ellipses in a Hele-Shaw cell
n this work we investigate the effect of vertical confinement and inertia on the flow past thin ellipses in a Hele-Shaw cell (with centre line velocity Uc
and height 2 h
) with different aspect ratios for symmetrical flows and at an angle of attack, using asymptotic methods and numerical simulations. A Stokes region is identified at the ellipse vertices which results in flow different to flow past bluff bodies. Comparison with asymptotic analysis indicates close agreement over the ‘flat’ portion of the ellipse, for δ=(b/a)=0.05
, where a
and b
are the semi-major and -minor ellipse axes, respectively. Two flow conditions are investigated for ellipses at an angle of attack of 10 ∘
for a fixed δ=0.05
. Firstly, for Λ=(Uca/ν)(h/a)2≪1
, the effect of increasing the vertical confinement of the Hele-Shaw cell results in the rear stagnation point (RSP) moving from close to the potential-flow prediction when ϵ=h/a
is very small to the two-dimensional Stokes-flow prediction when ϵ
is large. Secondly, for a fixed ϵ≪1
, when inertia is increased past Λ=O(ϵ)
the RSP moves towards the trailing edge and is located there for Λ=O(1)
. Under these conditions an attached exponentially decaying shear layer or ‘viscous tail’ is formed. A modified Bernoulli equation of the depth-averaged flow, together with the Kutta–Joukowski theorem is used to predict the drag and lift coefficients on the ellipse, which include a linear and a nonlinear contribution, corresponding to a Hele-Shaw and circulation component, respectively. Close agreement is found up to Λ=O(1)
Assessment of power losses of an inverter-driven induction machine with its experimental validation
Published versio
Recommended from our members
Impact of a person-centred dementia care training programme on hospital staff attitudes, role efficacy and perceptions of caring for people with dementia: A repeated measures study.
Background: People with dementia occupy up to one quarter of acute hospital beds. However, the quality of care delivered to this patient group is of national concern. Staff working in acute hospitals report lack of knowledge, skills and confidence in caring for people with dementia. There is limited evidence about the most effective approaches to supporting acute hospital staff to deliver more person-centred care. Objectives: This study aimed to evaluate the efficacy of a specialist training programme for acute hospital staff regarding improving attitudes, satisfaction and feelings of caring efficacy, in provision of care to people with dementia. Design: A repeated measures design, with measures completed immediately prior to commencing training (T1), after completion of Foundation level training (T2: 4-6 weeks post-baseline), and following Intermediate level training (T3: 3-4 months post-baseline). Setting: One NHS Trust in the North of England, UK. Participants: 40 acute hospital staff working in clinical roles, the majority of whom (90%) were nurses. Methods: All participants received the 3.5 day Person-centred Care Training for Acute Hospitals (PCTAH) programme, comprised of two levels, Foundation (1/2 day) and Intermediate (3 days), delivered over a 3-4 month period. Staff demographics and previous exposure to dementia training was collected via a questionnaire. Staff attitudes were measured using the Approaches to Dementia Questionnaire (ADQ), satisfaction in caring for people with dementia was captured using the Staff Experiences of Working with Demented Residents questionnaire (SEWDR) and perceived caring efficacy was measured using the Caring Efficacy Scale (CES). Results: The training programme was effective in producing a significant positive change on all three outcome measures following intermediate training compared to baseline. A significant positive effect was found on the ADS between baseline and after completion of Foundation level training, but not for either of the other measures. Conclusions: Training acute hospital staff in Intermediate level person-centred dementia care is effective in producing significant improvements in attitudes towards and satisfaction in caring for people with dementia and feelings of caring efficacy. Foundation level training is effective in changing attitudes but does not seem to be sufficient to bring about change in satisfaction or caring efficacy
- …