Self-contained breathing apparatus

A self-contained breathing apparatus with automatic redundant fluid pressure controls and a facemask mounted low pressure whistle alarm is described. The first stage of the system includes pair of pressure regulators connected in parallel with different outlet pressures, both of which reduce the pressure of the stored supply gas to pressures compatible with the second stage breathing demand regulator. A primary regulator in the first stage delivers a low output pressure to the demand regulator. In the event of a failure closed condition of the primary regulator an automatic transfer valve switches on the backup regulator. A warning that the supply pressure has been depleted is also provided by a supply pressure actuated transfer valve which transfers the output of the first stage pressure regulators from the primary to the backup regulator. The alarm is activated in either the failure closed condition or if the supply pressure is reduced to a dangerously low level

Tables and charts of equilibrium thermodynamic properties of ammonia for temperatures from 500 to 50,000 K.

Equilibrium thermodynamic properties for pure ammonia were generated for a range of temperature from 500 to 50,000 K and pressure from 0.01 to 40 MN/sq m and are presented in tabulated and graphical form. Properties include pressure, temperature, density, enthalpy, speed of sound, entropy, molecular-weight ratio, specific heat at constant pressure, specific heat at constant volume, isentropic exponent, and species mole fractions. These properties were calculated by the method which is based on minimization of the Gibbs free energy. The data presented herein are for an 18-species ammonia model. Heats of formation and spectroscopic constants used as input data are presented. Comparison of several thermodynamic properties calculated with the present program and a second computer code is performed for a range of pressure and for temperatures up to 30,000 K

An inlet analysis for the NASA hypersonic research engine aerothermodynamic integration model

A theoretical analysis for the inlet of the NASA Hypersonic Research Engine (HRE) Aerothermodynamic Integration Model (AIM) has been undertaken by use of a method-of-characteristics computer program. The purpose of the analysis was to obtain pretest information on the full-scale HRE inlet in support of the experimental AIM program (completed May 1974). Mass-flow-ratio and additive-drag-coefficient schedules were obtained that well defined the range effected in the AIM tests. Mass-weighted average inlet total-pressure recovery, kinetic energy efficiency, and throat Mach numbers were obtained

Defect Visualization and Location of Reinforcing Bars and Cables in Concrete Using Active Electromagnetic Induction Imaging

Reinforced concrete is used to build many modern structures such as bridges and buildings. The strength of these structures is dependent upon the integrity of the steel reinforcing embedded in the concrete. Over a period of time the rebars may begin to corrode and crack. The loss of steel due to corrosion or the loss of strength due to cracking may lead to structural failure particularly for prestressed concrete. The work described in this paper is the development of active electromagnetic induction sensors capable of detecting reinforcing bars within concrete and the identification of surface breaking defects on the reinforcing bars

Towards run-time monitoring of web services conformance to business-level agreements

Web service behaviour is currently specified in a mixture of ways, often using methods that are only partially complete. These range from static functional specifications, based on interfaces in WSDL and preconditions in RIF, to business process simulations using executable process-based models such as BPEL, to detailed quality of service (QoS) agreements laid down in a service level agreement (SLA). This paper recognises that something similar to a SLA is required at the higher business level to govern the contract between service producers, brokers and consumers. We call this a business level agreement (BLA) and within this framework, seek to unify disparate aspects of functional specification, QoS and run-time verification. We propose that the method for validating a web service with respect to its advertised BLA should be based on run-time service monitoring. This is a position paper towards defining these goals

Parametric coupling between macroscopic quantum resonators

Time-dependent linear coupling between macroscopic quantum resonator modes generates both a parametric amplification also known as a {}"squeezing operation" and a beam splitter operation, analogous to quantum optical systems. These operations, when applied properly, can robustly generate entanglement and squeezing for the quantum resonator modes. Here, we present such coupling schemes between a nanomechanical resonator and a superconducting electrical resonator using applied microwave voltages as well as between two superconducting lumped-element electrical resonators using a r.f. SQUID-mediated tunable coupler. By calculating the logarithmic negativity of the partially transposed density matrix, we quantitatively study the entanglement generated at finite temperatures. We also show that characterization of the nanomechanical resonator state after the quantum operations can be achieved by detecting the electrical resonator only. Thus, one of the electrical resonator modes can act as a probe to measure the entanglement of the coupled systems and the degree of squeezing for the other resonator mode.Comment: 15 pages, 4 figures, submitte

Comparative Studies of Some Polypores Using High Performance Liquid Chromatography

Isolates of four polypores; Ganoderma colossum, Ganoderma lucidum, Trametes cingulata and Daedalea quercina were compared using the High performance liquid chromatographic profiles of their triterpenoids. A higher abundance of colossolactone E was found in Ganoderma colossum isolate (FC 876) when compared with FC 872 obtained at different periods and dried differently and 23- hydroxycolossolactone E found in FC 876 was not observed in FC 872. Equal abundance of constituents was also found in Ganoderma lucidum isolates (FC 871 and FC 875) collected from different hosts and geographical locations. The isolates of Trametes cingulata that were of different ages showed predominance of the major constituents in FC 873 and FC 885 isolates when compared with FC 870. The abundance of the triterpenoid in the isolates of Daedalea quercina was almost doubled in FC 882 when compared with that of FC 878. These conform with the chemical spot test results on these polypores in a previous work. The ability of the polypores to produce triterpenoids is affected by their age, period of collection, geographical location and method of drying, which also affected the High Performance Liquid Chromatography characteristics of their secondary metabolites. African Research Review Vol. 1 (1) 2007: pp. 77-9

Mapping of serotype-specific, immunodominant epitopes in the NS-4 region of hepatitis C virus (HCV):use of type-specific peptides to serologically differentiate infections with HCV types 1, 2, and 3

The effect of sequence variability between different types of hepatitis C virus (HCV) on the antigenicity of the NS-4 protein was investigated by epitope mapping and by enzyme-linked immunosorbent assay with branched oligopeptides. Epitope mapping of the region between amino acid residues 1679 and 1768 in the HCV polyprotein revealed two major antigenic regions (1961 to 1708 and 1710 to 1728) that were recognized by antibody elicited upon natural infection of HCV. The antigenic regions were highly variable between variants of HCV, with only 50 to 60% amino acid sequence similarity between types 1, 2, and 3. Although limited serological cross-reactivity between HCV types was detected between peptides, particularly in the first antigenic region of NS-4, type-specific reactivity formed the principal component of the natural humoral immune response to NS-4. Type-specific antibody to particular HCV types was detected in 89% of the samples from anti-HCV-positive blood donors and correlated almost exactly with genotypic analysis of HCV sequences amplified from the samples by polymerase chain reaction. Whereas almost all blood donors appeared to be infected with a single virus type (97%), a higher proportion of samples (40%) from hemophiliacs infected from transfusion of non-heat-inactivated clotting factor contained antibody to two or even all three HCV types, providing evidence that long-term exposure may lead to multiple infection with different variants of HCV