98 research outputs found
Using a Cold Radiometer to Measure Heat Loads and Survey Heat Leaks
We have developed an inexpensive cold radiometer for use in thermal/vacuum chambers to measure heat loads, characterize emissivity and specularity of surfaces and to survey areas to evaluate stray heat loads. We report here the results of two such tests for the James Webb Space Telescope to measure heat loads and effective emissivities of 2 major pieces of optical ground support equipment that will be used in upcoming thermal vacuum testing of the Telescope
Heat Switches for ADRs
Heat switches are key elements in the cyclic operation of Adiabatic Demagnetization Refrigerators (ADRs). Several of the types of heat switches that have been used for ADRs are described in this paper. Key elements in selection and design of these switches include not only ON/OFF switching ratio, but also method of actuation, size, weight, and structural soundness. Some of the trade-off are detailed in this paper
Design of the PIXIE Cryogenic System
The Primordial Inflation Explorer (PIXIE) is a proposed m1ss1on to study the polarization of the remnant cosmic microwave background with the goal of finding and understanding primordial gravity waves. The instrument has been designed to capture this information across the entire sky by rejecting foreground signals and suppressing systematic error by multiple differencing methods. The instrument operates at a temperature very close to the Cosmic Microwave Background of 2.7 K, while the detectors operate at 0.1 K. The PIXIE cryogenic system provides this in low Earth orbit by making use of 3 subsystems. Lightweight, simply deployed shields provide protection against the Earth and Sun while passively cooling wiring and instrument supports at 150 K. A mechanical cryocooler precools wires and supports at 68, 17, and 4.5 K while its compressors operate at room temperature. And finally two adiabatic demagnetization refrigerators cool the instrument from 4.5 to 2.7 K and cool the detectors to 0.1 K. Staged cooling in this manner allows a thermodynamically efficient use of relatively mature technologies that can be fully demonstrated before flight.
A Study of the Individual Contributions of Heat Generated by a XRISM/Resolve ADR Stage Magnet and Its Magnetic Shielding
A typical Adiabatic Demagnetization Refrigerator (ADR) has modest cooling power, on the order of a few microwatts. Thus, understanding heat loads going into and generated within the ADR is vital to its efficiency as well as the efficiency of the total cryogenic system of a spacecraft. One of the many sources of heat that effects the total cryogenic system is the parasitic heat due to AC loss in the ADR magnet and hysteretic loss in its magnetic shielding during a ramp. Although the sum of the heat from both of these sources can be measured during the operation of the ADR, the individual contributions are not easily obtainable in situ. Therefore, a study is being conducted to experimentally measure the contributions of the parasitic heat produced during ramping from the magnet only and from the magnet-shield combo. This study will give better inputs to the heat load model of the total cryogenic system being built for the X-Ray Imaging and Spectroscopy Mission (XRISM) slated to launch in 2022
Use of Cold Radiometers in Several Thermal/Vacuum Tests
We have developed a low cost low temperature broadband radiometer for use with low temperature tests as a diagnostic tool for measuring stray thermal radiation and remote measurement of material properties. So far these radiometers have been used in two large thermal/vacuum tests for the James Webb Space Telescope (JWST) Project. In the first test the radiometers measured stray radiation in a test of part of the JWST sunshield, and in the second test the radiometers were used to measure the reflectivity and specularity of black Z307 painted aluminum walls on a 25 K cooled shroud. These results will be presented as well as plans for future tests to measure the residual energy through a baffled aperture in the shroud and other stray thermal energy measurements
Mission Concept for the Single Aperture Far-Infrared (SAFIR) Observatory
The Single Aperture Far-InfraRed (SAFIR) Observatory's science goals are
driven by the fact that the earliest stages of almost all phenomena in the
universe are shrouded in absorption by and emission from cool dust and gas that
emits strongly in the far-infrared and submillimeter. Over the past several
years, there has been an increasing recognition of the critical importance of
this spectral region to addressing fundamental astrophysical problems, ranging
from cosmological questions to understanding how our own Solar System came into
being. The development of large, far-infrared telescopes in space has become
more feasible with the combination of developments for the James Webb Space
Telescope and of enabling breakthroughs in detector technology. We have
developed a preliminary but comprehensive mission concept for SAFIR, as a 10
m-class far-infrared and submillimeter observatory that would begin development
later in this decade to meet the needs outlined above. Its operating
temperature (<4K) and instrument complement would be optimized to reach the
natural sky confusion limit in the far-infrared with diffraction-limited
peformance down to at least 40 microns. This would provide a point source
sensitivity improvement of several orders of magnitude over that of Spitzer or
Herschel, with finer angular resolution, enabling imaging and spectroscopic
studies of individual galaxies in the early universe. We have considered many
aspects of the SAFIR mission, including the telescope technology, detector
needs and technologies, cooling method and required technology developments,
attitude and pointing, power systems, launch vehicle, and mission operations.
The most challenging requirements for this mission are operating temperature
and aperture size of the telescope, and the development of detector arrays.Comment: 36 page
Tunable Superconducting Gravity Gradiometer for Mars Climate, Atmosphere, and Gravity Field Investigation
We are developing a compact tensor superconducting gravity gradiometer (SGG) for obtaining gravimetric measurements from planetary orbits. A new and innovative design gives a potential sensitivity of approximately 10(sup -4) E Hz(sup - 1/2)( 1 E = 10(sup -9 S(sup -2) in the measurement band up to 0.1 Hz (suitale for short wavelength static gravity) and of approximately 10(sup -4) E Hz(sup - 1/2) in the frequency band less than 1 mHz (for long wavelength time-variable gravity) from the same device with a baseline just over 10 cm. The measurement band and sensitiy can be optimally tuned in-flight during the mission by changing resonance frequencies, which allows meaurements of both static and time-variable gravity fields from the same mission. Significant advances in the technologies needed for space-based cryogenic instruments have been made in the last decade. In particular, the use of cryocoolers will alleviate the previously severe constraint on mission lifetime imposed by the use of liquid helium, enabling mission durations in the 5 - 10 year range
Operation of an ADR Using Helium Exchange Gas as a Substitute for a Failed Heat Switch
The Soft X-ray Spectrometer (SXS) is one of four instruments on the Japanese Astro-H mission, which is currently planned for launch in late 2015. The SXS will perform imaging spectroscopy in the soft X-ray band (0.3-12 keV) using a 6 6 pixel array of microcalorimeters cooled to 50 mK. The detectors are cooled by a 3-stage adiabatic demagnetization refrigerator (ADR) that rejects heat to either a superfluid helium tank (at 1.2 K) or to a 4.5 K Joule-Thomson (JT) cryocooler. Four gas-gap heat switches are used in the assembly to manage heat flow between the ADR stages and the heat sinks. The engineering model (EM) ADR was assembled and performance tested at NASA/GSFC in November 2011, and subsequently installed in the EM dewar at Sumitomo Heavy Industries, Japan. During the first cooldown in July 2012, a failure of the heat switch that linked the two colder stages of the ADR to the helium tank was observed. Operation of the ADR requires some mechanism for thermally linking the salt pills to the heat sink, and then thermally isolating them. With the failed heat switch unable to perform this function, an alternate plan was devised which used carefully controlled amounts of exchange gas in the dewar's guard vacuum to facilitate heat exchange. The process was successfully demonstrated in November 2012, allowing the ADR to cool the detectors to 50 mK for hold times in excess of 10 h. This paper describes the exchange-gas-assisted recycling process, and the strategies used to avoid helium contamination of the detectors at low temperature
Localized helium excitations in 4He_N-benzene clusters
We compute ground and excited state properties of small helium clusters 4He_N
containing a single benzene impurity molecule. Ground-state structures and
energies are obtained for N=1,2,3,14 from importance-sampled, rigid-body
diffusion Monte Carlo (DMC). Excited state energies due to helium vibrational
motion near the molecule surface are evaluated using the projection operator,
imaginary time spectral evolution (POITSE) method. We find excitation energies
of up to ~23 K above the ground state. These states all possess vibrational
character of helium atoms in a highly anisotropic potential due to the aromatic
molecule, and can be categorized in terms of localized and collective
vibrational modes. These results appear to provide precursors for a transition
from localized to collective helium excitations at molecular nanosubstrates of
increasing size. We discuss the implications of these results for analysis of
anomalous spectral features in recent spectroscopic studies of large aromatic
molecules in helium clusters.Comment: 15 pages, 5 figures, submitted to Phys. Rev.
Structural and dynamical properties of superfluid helium: a density functional approach
We present a novel density functional for liquid 4He, properly accounting for
the static response function and the phonon-roton dispersion in the uniform
liquid. The functional is used to study both structural and dynamical
properties of superfluid helium in various geometries. The equilibrium
properties of the free surface, droplets and films at zero temperature are
calculated. Our predictions agree closely to the results of ab initio Monte
Carlo calculations, when available. The introduction of a phenomenological
velocity dependent interaction, which accounts for backflow effects, is
discussed. The spectrum of the elementary excitations of the free surface and
films is studied.Comment: 37 pages, REVTeX 3.0, figures on request at [email protected]
- …