112 research outputs found
New developments in the representation of Saharan dust sources in the aerosol–climate model ECHAM6-HAM2
In the aerosol–climate model ECHAM6-HAM2, dust source activation (DSA)
observations from Meteosat Second Generation (MSG) satellite are proposed to
replace the original source area parameterization over the Sahara Desert.
The new setup is tested in nudged simulations for the period 2007 to 2008.
The evaluation is based on comparisons to dust emission events inferred from
MSG dust index imagery, Aerosol Robotic Network (AERONET) sun photometer observations, and satellite
retrievals of aerosol optical thickness (AOT).<br><br>The model results agree well with AERONET measurements especially in terms
of seasonal variability, and a good spatial correlation was found between
model results and MSG-SEVIRI (Spinning-Enhanced Visible and InfraRed Imager) dust AOT as well as Multi-angle Imaging SpectroRadiometer (MISR) AOT. ECHAM6-HAM2 computes a more realistic
geographical distribution and up to 20 % higher annual Saharan dust
emissions, using the MSG-based source map. The representation of dust AOT is
partly improved in the southern Sahara and Sahel. In addition, the spatial
variability is increased towards a better agreement with observations
depending on the season. Thus, using the MSG DSA map can help to circumvent
the issue of uncertain soil input parameters.<br><br>An important issue remains the need to improve the model representation of
moist convection and stable nighttime conditions. Compared to sub-daily DSA
information from MSG-SEVIRI and results from a regional model, ECHAM6-HAM2
notably underestimates the important fraction of morning dust events by the
breakdown of the nocturnal low-level jet, while a major contribution is from
afternoon-to-evening emissions
Wildfires as a source of airborne mineral dust - Revisiting a conceptual model using large-eddy simulation (LES)
Airborne mineral dust is a key player in the Earth system and shows manifold impacts on atmospheric properties such as the radiation budget and cloud microphysics. Investigations of smoke plumes originating from wildfires found significant fractions of mineral dust within these plumes - most likely raised by strong, turbulent fire-related winds. This study presents and revisits a conceptual model describing the emission of mineral dust particles during wildfires. This is achieved by means of high-resolution large-eddy simulation (LES), conducted with the All Scale Atmospheric Model (ASAM). The impact of (a) different fire properties representing idealized grassland and shrubland fires, (b) different ambient wind conditions modulated by the fire's energy flux, and (c) the wind's capability to mobilize mineral dust particles was investigated. Results from this study illustrate that the energy release of the fire leads to a significant increase in near-surface wind speed, which consequently enhances the dust uplift potential. This is in particular the case within the fire area where vegetation can be assumed to be widely removed and uncovered soil is prone to wind erosion. The dust uplift potential is very sensitive to fire properties, such as fire size, shape, and intensity, but also depends on the ambient wind velocity. Although measurements already showed the importance of wildfires for dust emissions, pyro-convection is so far neglected as a dust emission process in atmosphere-aerosol models. The results presented in this study can be seen as the first step towards a systematic parameterization representing the connection between typical fire properties and related dust emissions
The Dust Emission Potential of Agricultural-Like Fires—Theoretical Estimates From Two Conceptually Different Dust Emission Parameterizations
Agricultural fires affecting grass-, crop- and shrublands represent a major, mainly anthropogenically driven disturbance of many ecosystems. In addition to emissions of carbonaceous aerosol, they were found to inject also mineral dust particles into the atmosphere. The fires can significantly modulate the near-surface wind patterns so that conditions suitable for dust emission occur. However, the exact emission mechanism has not been investigated so far, but is inevitable for the understanding of its impacts on the Earth system. Here, we test two dust emission parameterizations representing saltation bombardment (SALT) and direct aerodynamic dust entrainment by (convective) turbulence (convective turbulent dust emission, CTDE) in the context of fire-modulated wind patterns using large-eddy simulation with an idealized setup to represent typical agricultural fire settings. Favorable aerodynamic preconditions for the initialization of both emission processes are found, however, with sometimes significant differences in dust emission flux depending on specific wind and fire properties. The strong fire-induced modulations of the instantaneous momentum flux suggest that CTDE can be a very potent emission process in the fire vicinity. Nevertheless, fire impacts on the friction velocity can be significant too, so that dust emission through SALT is facilitated as well. Ultimately, the specific aerodynamic conditions within pyro-convectively modulated wind patterns require the development of a parameterization that can describe these unique fire-related dust emissions and their influencing factors properly. This will finally allow for considering fire-induced dust emissions in aerosol-atmosphere models and an investigation of its atmospheric impacts such as on the radiation budget
The Dust Emission Potential of Agricultural-Like Fires—Theoretical Estimates From Two Conceptually Different Dust Emission Parameterizations
Agricultural fires affecting grass-, crop- and shrublands represent a major, mainly anthropogenically driven disturbance of many ecosystems. In addition to emissions of carbonaceous aerosol, they were found to inject also mineral dust particles into the atmosphere. The fires can significantly modulate the near-surface wind patterns so that conditions suitable for dust emission occur. However, the exact emission mechanism has not been investigated so far, but is inevitable for the understanding of its impacts on the Earth system. Here, we test two dust emission parameterizations representing saltation bombardment (SALT) and direct aerodynamic dust entrainment by (convective) turbulence (convective turbulent dust emission, CTDE) in the context of fire-modulated wind patterns using large-eddy simulation with an idealized setup to represent typical agricultural fire settings. Favorable aerodynamic preconditions for the initialization of both emission processes are found, however, with sometimes significant differences in dust emission flux depending on specific wind and fire properties. The strong fire-induced modulations of the instantaneous momentum flux suggest that CTDE can be a very potent emission process in the fire vicinity. Nevertheless, fire impacts on the friction velocity can be significant too, so that dust emission through SALT is facilitated as well. Ultimately, the specific aerodynamic conditions within pyro-convectively modulated wind patterns require the development of a parameterization that can describe these unique fire-related dust emissions and their influencing factors properly. This will finally allow for considering fire-induced dust emissions in aerosol-atmosphere models and an investigation of its atmospheric impacts such as on the radiation budget
Recommended from our members
How important are atmospheric depressions and mobile cyclones for emitting mineral dust aerosol in North Africa?
This study presents the first quantitative estimate of the mineral dust emission associated with atmospheric depressions and mobile cyclones in North Africa. Atmospheric depressions are automatically tracked at 925 hPa based on ERA-Interim data from the European Centre for Medium-Range Weather Forecasts for 1989–2008. A set of filter criteria is applied to identify mobile cyclones, i.e. migrating and long-lived cyclones. The shorter term cyclone is used as a synonym for mobile cyclones. Dust emission is calculated with a dust emission model driven by 10 m winds and soil moisture from ERA-Interim. Emission peaks during winter and spring with spatial averages of 250–380 g m−2 per month. Comparison of the dust source activation frequency from the model against SEVIRI satellite observation shows a good agreement in the Bodélé Depression but differences in the north and west of North Africa. Depressions are abundant, particularly in summer when the Saharan heat low is situated over West Africa and during spring in the lee of the Atlas Mountains. Up to 90% (55% annually and spatially averaged) of dust emission occurs within 10 degrees of these depressions, with embedded mechanisms such as nocturnal low-level jets playing a role. Cyclones are rarer and occur primarily north of 20° N in spring in agreement with previous studies and over summertime West Africa consistent with near-surface signatures of African Easterly Waves. Dust emission within 10 degrees of cyclones peaks over Libya with up to 25% in spring. Despite the overall small contribution of 4% annually and spatially averaged, cyclones coincide with particularly intense dust emission events exceeding the climatological mean by a factor of four to eight. Soil moisture weakens dust emission during cyclone passage by about 10%
Recommended from our members
The sensitivity of the colour of dust in MSG-SEVIRI Desert Dust infrared composite imagery to surface and atmospheric conditions
Infrared "Desert Dust" composite imagery taken by the Spinning Enhanced Visible and InfraRed Imager (SEVIRI), onboard the Meteosat Second Generation (MSG) series of satellites above the equatorial East Atlantic, has been widely used for more than a decade to identify and track the presence of dust storms from and over the Sahara Desert, the Middle East, and southern Africa. Dust is characterised by distinctive pink colours in the Desert Dust false-colour imagery; however, the precise colour is influenced by numerous environmental properties, such as the surface thermal emissivity and skin temperature, the atmospheric water vapour content, the quantity and height of dust in the atmosphere, and the infrared optical properties of the dust itself. For this paper, simulations of SEVIRI infrared measurements and imagery have been performed using a modelling system, which combines dust concentrations simulated by the aerosol transport model COSMO-MUSCAT (COSMO: COnsortium for Small-scale MOdelling; MUSCAT: MUltiScale Chemistry Aerosol Transport Model) with radiative transfer simulations from the RTTOV (Radiative Transfer for TOVS) model. Investigating the sensitivity of the synthetic infrared imagery to the environmental properties over a 6-month summertime period from 2011 to 2013, it is confirmed that water vapour is a major control on the apparent colour of dust, obscuring its presence when the moisture content is high. Of the three SEVIRI channels used in the imagery (8.7, 10.8, and 12.0 μm), the channel at 10.8 μm has the highest atmospheric transmittance and is therefore the most sensitive to the surface skin temperature. A direct consequence of this sensitivity is that the background desert surface exhibits a strong diurnal cycle in colour, with light blue colours possible during the day and purple hues prevalent at night. In dusty scenes, the clearest pink colours arise from high-altitude dust in dry atmospheres. Elevated dust influences the dust colour primarily by reducing the contrast in atmospheric transmittance above the dust layer between the SEVIRI channels at 10.8 and 12.0 μm, thereby boosting red and pink colours in the imagery. Hence, the higher the dust altitude, the higher the threshold column moisture needed for dust to be obscured in the imagery: for a sample of dust simulated to have an aerosol optical depth (AOD) at 550 nm of 2-3 at an altitude of 3-4 km, the characteristic colour of the dust may only be impaired when the total column water vapour is particularly moist ('39 mm). Meanwhile, dust close to the surface (altitude < 1 km) is only likely to be apparent when the atmosphere is particularly dry and when the surface is particularly hot, requiring column moisture/13 mm and skin temperatures '314 K, and is highly unlikely to be apparent when the skin temperature is/300 K. Such low-altitude dust will regularly be almost invisible within the imagery, since it will usually be beneath much of the atmospheric water vapour column. It is clear that the interpretation of satellite-derived dust imagery is greatly aided by knowledge of the background environment
Wildfires as a source of airborne mineral dust – revisiting a conceptual model using large-eddy simulation (LES)
Airborne mineral dust is a
key player in the Earth system and shows manifold impacts on atmospheric
properties such as the radiation budget and cloud microphysics.
Investigations of smoke plumes originating from wildfires found significant
fractions of mineral dust within these plumes – most likely raised by
strong, turbulent fire-related winds. This study presents and revisits a
conceptual model describing the emission of mineral dust particles during
wildfires. This is achieved by means of high-resolution large-eddy simulation
(LES), conducted with the All Scale Atmospheric Model (ASAM). The impact of
(a)Â different fire properties representing idealized grassland and shrubland
fires, (b)Â different ambient wind conditions modulated by the fire's energy
flux, and (c)Â the wind's capability to mobilize mineral dust particles was
investigated. Results from this study illustrate that the energy release of
the fire leads to a significant increase in near-surface wind speed, which
consequently enhances the dust uplift potential. This is in particular the
case within the fire area where vegetation can be assumed to be widely
removed and uncovered soil is prone to wind erosion. The dust uplift
potential is very sensitive to fire properties, such as fire size, shape, and
intensity, but also depends on the ambient wind velocity. Although
measurements already showed the importance of wildfires for dust emissions,
pyro-convection is so far neglected as a dust emission process in
atmosphere–aerosol models. The results presented in this study can be seen
as the first step towards a systematic parameterization representing the
connection between typical fire properties and related dust emissions.</p
Recommended from our members
Author Correction: Enhanced tenacity of mycobacterial aerosols from necrotic neutrophils
The original version of this Article contained errors within the affiliations section. Affiliation 4 was incorrectly given as ‘Leibniz Research Alliance INFECTIONS’21, Leipzig, Germany’. The correct affiliation is listed below: Leibniz Research Alliance INFECTIONS’21, Borstel, 23845, Germany Also, Affiliation 5 was incorrectly given as ‘German Center for Infection Research, TTU-TB, Borstel, 23845, Germany’. The correct affiliation is listed below: German Center for Infection Research (DZIF), Partner Site Hamburg-Lübeck-Borstel, Germany. Finally, the original HTML version of this Article omitted an affiliation for G. Gabriel. The correct affiliations for G. Gabriel are listed below: Heinrich Pette Institute, Leibniz Institute for Experimental Virology, Hamburg, 20251, Germany. Leibniz Research Alliance INFECTIONS’21, Borstel, 23845, Germany. German Center for Infection Research (DZIF), Partner Site Hamburg-Lübeck-Borstel, Germany. These errors have now been corrected in the PDF and HTML versions of the Article
How important are atmospheric depressions and mobile cyclones for emitting mineral dust aerosol in North Africa?
This study presents the first quantitative estimate of the mineral dust
emission associated with atmospheric depressions and mobile cyclones in North
Africa. Atmospheric depressions are automatically tracked at 925 hPa based on
ERA-Interim data from the European Centre for Medium-Range Weather Forecasts
for 1989–2008. A set of filter criteria is applied to identify mobile
cyclones, i.e. migrating and long-lived cyclones. The shorter term cyclone is
used as a synonym for mobile cyclones. Dust emission is calculated with a
dust emission model driven by 10 m winds and soil moisture from ERA-Interim.
Emission peaks during winter and spring with spatial averages of
250–380 g m−2 per month. Comparison of the dust source activation
frequency from the model against SEVIRI satellite observation shows a good
agreement in the Bodélé Depression but differences in the north and west
of North Africa. Depressions are abundant, particularly in summer when the
Saharan heat low is situated over West Africa and during spring in the lee of
the Atlas Mountains. Up to 90% (55% annually and spatially
averaged) of dust emission occurs within 10 degrees of these depressions,
with embedded mechanisms such as nocturnal low-level jets playing a role.
Cyclones are rarer and occur primarily north of 20° N in spring in
agreement with previous studies and over summertime West Africa consistent
with near-surface signatures of African Easterly Waves. Dust emission within
10 degrees of cyclones peaks over Libya with up to 25% in spring.
Despite the overall small contribution of 4% annually and spatially
averaged, cyclones coincide with particularly intense dust emission events
exceeding the climatological mean by a factor of four to eight. Soil moisture
weakens dust emission during cyclone passage by about 10%
- …