Photoluminescence Mapping over Laser Pulse Fluence and Repetition Rate as a Fingerprint of Charge and Defect Dynamics in Perovskites

Defects in metal halide perovskites (MHP) are photosensitive, making the observer effect unavoidable when laser spectroscopy methods are applied. Photoluminescence (PL) bleaching and enhancement under light soaking and recovery in dark are examples of the transient phenomena that are consequent to the creation and healing of defects. Depending on the initial sample composition, environment, and other factors, the defect nature and evolution can strongly vary, making spectroscopic data analysis prone to misinterpretations. Herein, the use of an automatically acquired dependence of PL quantum yield (PLQY) on the laser pulse repetition rate and pulse fluence as a unique fingerprint of both charge carrier dynamics and defect evolution is demonstrated. A simple visual comparison of such fingerprints allows for assessment of similarities and differences between MHP samples. The study illustrates this by examining methylammonium lead triiodide (MAPbI3) films with altered stoichiometry that just after preparation showed very pronounced defect dynamics at time scale from milliseconds to seconds, clearly distorting the PLQY fingerprint. Upon weeks of storage, the sample fingerprints evolve toward the standard stoichiometric MAPbI3 in terms of both charge carrier dynamics and defect stability. Automatic PLQY mapping can be used as a universal method for assessment of perovskite sample quality

Are Shockley-Read-Hall and ABC models valid for lead halide perovskites?

Metal halide perovskites are an important class of emerging semiconductors. Their charge dynamics is poorly understood due to limited knowledge of defect physics and charge recombination mechanisms. Nevertheless, classical ABC and Shockley-Read-Hall (SRH) models are ubiquitously applied to perovskites without considering their validity. Herein, an advanced technique mapping photoluminescence quantum yield (PLQY) as a function of both the excitation pulse energy and repetition frequency is developed and employed to examine the validity of these models. While ABC and SRH fail to explain the charge dynamics in a broad range of conditions, the addition of Auger recombination and trapping to the SRH model enables a quantitative fitting of PLQY maps and low-power PL decay kinetics, and extracting trap concentrations and efficacies. Higher-power PL kinetics requires the inclusion of additional non-linear processes. The PLQY mapping developed herein is suitable for a comprehensive testing of theories and is applicable to any semiconductor.Comment: Supplementary Information available at https://cloudstore.zih.tu-dresden.de/index.php/s/t5gBPJgwZiwfRR

Expression of proteins of interest in food

PòsterJun

Biorealistic Response in Optoelectrically-Driven Flexible Halide-Perovskite Single-Crystal Memristors

The transition to smart wearable and flexible optoelectronic devices communicating with each other and performing neuromorphic computing at the edge is a big goal in next-generation optoelectronics. These devices should perform their regular tasks supported by energy-efficient in-memory calculations. Here, we study the response of the CsPbBr$_3$ halide-perovskite single crystal fabricated on the flexible polymer substrate and integrated with the single-walled carbon nanotube thin film electrodes in a lateral geometry. We show both photodetection functions combined with the synaptic functionality in our device under the application of hybrid optoelectrical stimuli. Furthermore, we demonstrate that our device exhibits frequency-dependent bidirectional modification of synaptic weight with a sliding threshold similar to biologically plausible Bienenstock-Cooper-Munro learning. The demonstrated optoelectronic synaptic behavior in halide-perovskite single-crystals opens the opportunity for the development of hybrid organic-inorganic artificial visual systems

Repurposing Poly(3-hexylthiophene) as a Conductivity-Reducing Additive for Polyethylene-Based High-Voltage Insulation

Poly(3-hexylthiophene) (P3HT) is found to be a highly effective conductivity-reducing additive for low-density polyethylene (LDPE), which introduces a new application area to the field of conjugated polymers. Additives that reduce the direct-current (DC) electrical conductivity of an insulation material at high electric fields have gained a lot of research interest because they may facilitate the design of more efficient high-voltage direct-current power cables. An ultralow concentration of regio-regular P3HT of 0.0005 wt% is found to reduce the DC conductivity of LDPE threefold, which translates into the highest efficiency reported for any conductivity-reducing additive to date. The here-established approach, i.e., the use of a conjugated polymer as a mere additive, may boost demand in absolute terms beyond the quantities needed for thin-film electronics, which would turn organic semiconductors from a niche product into commodity chemicals

Remarkable performance recovery in highly defective perovskite solar cells by photo-oxidation

Exposure to environmental factors is generally expected to cause degradation in perovskite films and solar cells. Herein, we show that films with certain defect profiles can display the opposite effect, healing upon exposure to oxygen under illumination. We tune the iodine content of methylammonium lead triiodide perovskite from understoichiometric to overstoichiometric and expose them to oxygen and light prior to the addition of the top layers of the device, thereby examining the defect dependence of their photooxidative response in the absence of storage-related chemical processes. The contrast between the photovoltaic properties of the cells with different defects is stark. Understoichiometric samples indeed degrade, demonstrating performance at 33% of their untreated counterparts, while stoichiometric samples maintain their performance levels. Surprisingly, overstoichiometric samples, which show low current density and strong reverse hysteresis when untreated, heal to maximum performance levels (the same as untreated, stoichiometric samples) upon the photooxidative treatment. A similar, albeit smaller-scale, effect is observed for triple cation and methylammonium-free compositions, demonstrating the general application of this treatment to state-of-the-art compositions. We examine the reasons behind this response by a suite of characterization techniques, finding that the performance changes coincide with microstructural decay at the crystal surface, reorientation of the bulk crystal structure for the understoichiometric cells, and a decrease in the iodine-to-lead ratio of all films. These results indicate that defect engineering is a powerful tool to manipulate the stability of perovskite solar cells

Small Number of Defects per Nanostructure Leads to “Digital” Quenching of Photoluminescence : The Case of Metal Halide Perovskites

Long charge carrier diffusion length and large grain size are commonly believed to be inherent properties of highly luminescent polycrystalline thin-film semiconductors. However, exactly these two properties make luminescence very susceptible to quenching by just one strongly quenching defect state if present in each grain. Moreover, when the number of quenchers per grain is small (say 1–10), it varies greatly from grain to grain, purely for statistical reasons. These fluctuations, which resemble digital signal switching, can be one of the reasons for large differences between the luminescence brightness of different grains in polycrystalline films. This and other peculiarities of photoluminescence in systems where the number of strong quenchers per grain/crystallite is small is discussed in detail using metal halide perovskites as examples

Energy transfer in multi-funnel systems quantitatively assessed by two-dimensional polarization imaging and single funnel approximation : From single molecules to ensembles

Two-dimensional polarization imaging (2D POLIM) is an experimental method where correlations between fluorescence excitation- and fluorescence emission-polarization properties are measured. One way to analyze 2D POLIM data is to apply a so-called single funnel approximation (SFA). The SFA allows for quantitative assessment of energy transfer between chromophores with identical spectra [homo-FRET (Förster resonance energy transfer)]. In this paper, we run a series of computer experiments to investigate the applicability of the analysis based on the SFA to various systems ranging from single multichromophoric systems to isotropic ensembles. By setting various scenarios of energy transfer between individual chromophores within a single object, we were able to define the borders of the practical application of SFA. It allowed us to reach a more comprehensive interpretation of the experimental data in terms of uncovering the internal arrangement of chromophores in the system and energy transfer between them. We also found that the SFA can always formally explain the data for isotropic ensembles and derived a formula connecting the energy funneling efficiency parameter and traditional fluorescence anisotropy

Gas-Phase Anion Exchange for Multisegment Heterostructured CsPb(Br1−xClx)3 Perovskite Nanowires

Metal-halide perovskites (MHPs) are promising as active optoelectronic materials for a diverse range of devices. Anion exchange is a post-growth modification of MHP materials that allows tuning of the band gap and crystal structure by exposure to alternative halides, normally using solution methods. Here, low temperature gas-phase anion exchange for the conversion of CsPbBr3 nanowires (NW) into CsPb(Br1−xClx) NWs using two media, fuming HCl and Cl2 gas, is systematically investigated. It is found that both methods can be used to tune the composition in the full range with excellent control. While fuming HCl is the simplest process, Cl2 gives similar results with no surface damage and better process control. Based on a simple solid diffusion model, an average diffusivity of 1.4 × 10−12 cm2s−1 is extracted for Cl-anions inside CsPbBr3. By combining the Cl2 exchange process with electron-beam lithography patterning, heterojunction NWs with varying halide compositions are produced, including complex barcode-like NWs with segment lengths as short as 500 nm. Designed heterostructures provide an important basis for optoelectronic device applications of MHPs, and gas-phase anion exchange should be suitable for any MHP morphology