Explicit finite element implementation of a shape memory alloy constitutive model and associated analyses

Shape memory alloys (SMA) represent an important class of smart metallic materials employed in various innovative applications thanks to their unique thermomechanical behavior. Since the 1980s, several SMA constitutive models have been proposed and implemented into both commercial and academic finite element analysis software tools. Such models have demonstrated their reliability and robustness in the design and optimization of a wide variety of SMA-based components. However, most models are implemented using implicit integration schemes, thus limiting their applicability in highly nonlinear analyses. The objective of this work is to present a novel explicit integration scheme for the numerical implementation of the three-dimensional Souza-Auricchio model, a phenomenological model able to reproduce the primary SMA responses (i.e., pseudoelasticity and shape memory effect). The model constitutive equations are formulated by adopting the continuum thermodynamic theory with internal variables, following a plasticity-like approach. An elastic predictor-inelastic corrector scheme is here used to solve the time-discrete non-linear constitutive equations in the explicit framework. The proposed algorithm is investigated through several benchmark boundary-value problems of increasing complexity, considering both pseudoelastic and shape memory response in quasi-static conditions; a comparison with an implicit integration scheme is also performed. Such numerical tests demonstrate the ability of the algorithm to reproduce key material behaviors with effectiveness and robustness. Particularly, the analysis of SMA cables demonstrates the effectiveness of the explicit algorithm to solve complex problems involving widespread nonlinear contact, which prevent the convergence of the implicit scheme. Details such as mass-scaling options are also discussed

Endangered and Threatened Fishes of South Dakota

An average person might know seven or eight of the approximately 100 fish species found in South Dakota. Once he had named the walleye, largemouth bass, northern pike, and other common sport fishes, he\u27d quickly lump the remaining ones into broad. unimportant categories. He might name the sucker. In reality, there are at least 11 species of suckers present in the state. He\u27d list minnow. But there are at least 36 minnow species in the state and many other small fishes that people call minnows. Being too small to catch or not good to eat should not label a fish as being unimportant. We should not arbitrarily consign any species to extinction by mismanaging or ignoring it simply because the species appears to have no practical value to us today

The resources of civil society

We understand civil society as a form, or rather, as a variety of forms, of social organization that contrast with government-imposed organization. We need some such marker for conceptually separating communities from the states that provide communities with governance. Loren Lomasky defines civil society as "the realm of voluntary association that stands between individuals (and perhaps their families) and the state.

Finite Strain Constitutive Modelling of Shape Memory Alloys Considering Partial Phase Transformation with Transformation-Induced Plasticity

This paper presents a unified modelling effort to describe partial phase transformation during cyclic thermo-mechanical loading in Shape Memory Alloys (SMA). To this purpose, a three-dimensional (3D) finite strain constitutive model considering TRansformation-Induced Plasticity (TRIP) is combined with a modified hardening function to enable the accurate and efficient prediction of partial transformations during cyclic thermo-mechanical loading. The capabilities of the proposed model are demonstrated by predicting the behavior of the material under pseudoelastic and actuation operation using finite element analysis. Numerical results of the modified model are presented and compared with the original model without considering the partial transformation feature as well as with uniaxial actuation experimental data. Various aspects of cyclic material behavior under partial transformation are analyzed and discussed for different SMA systems

Reversible Stress-Driven and Stress-Free Two-Way Shape Memory Effect in a Sol-Gel Crosslinked Polycaprolactone

The two-way shape memory effect is the ability of a material to change its shape between two configurations upon application and removal of a stimulus, and, among shape memory polymers, it is featured only by few systems, such as semicrystalline networks. When studied under tensile conditions, it consists of elongation-contraction cycles along cooling and heating across the crystallization and melting region, typically under the application of a constant load. However, recent studies on crosslinked semicrystalline co-polymers demonstrate that also a completely stress-free, or self-sustained, two-way effect may be achieved through specific thermomechanical cycles. This effect is currently regarded with interest for the development of intrinsically reversible sensors and actuators, and it may also be displayed by simpler materials, as homopolymer-based semicrystalline networks. Only seldom articles investigate this possibility, therefore in this work the two-way shape memory behavior is studied on a poly(e-caprolactone) system, crosslinked by means of a sol-gel approach. The effect is studied both under stress-driven and stress-free condition, by applying properly set-up thermo-mechanical histories. The results allow to describe the effect as a function of temperature, to reveal the dependence on specific testing parameters and to compare the extent of the reversible strain variation under these two conditions

Α comparison of methods for measuring particulate emissions in waste gases from glass melting tanks Α report by the International Commission on Glass, Technical Committee 13, Pollution

The paper seeks to make a glass industry recommendation on the preferred method for the measurement of particulate emissions in the waste gases from glass melting tanks. Α compilation of work is presented carried out by laboratories in five European countries to compare the commonly used methods. The methods are described briefly with particular reference to the principal differences of filter configuration, materials and situation. The variables have been studied and recommendations are made on the necessity to standardise certain aspects. The methods have been compared by simultaneous measurements on different types of furnaces with different fuels and glass compositions. The principal difference between the methods lies in whether the filter is situated inside, or outside, the stack. It is concluded that in-stack filtration should be preferred since it avoids the errors and uncertainties associated with the condensation of solid and liquid phases in out-of-stack filter systems

Stress-Free Two-Way Shape Memory Effect of Poly(ethylene glycol)/ Poly(epsilon-caprolactone) Semicrystalline Networks

In this work, poly(ethylene glycol) (PEG)/poly(epsilon- caprolactone) (PCL) semicrystalline networks were prepared by photo-cross-linking of methacrylated macromonomers with different molecular weights and in different proportions to obtain amphiphilic materials capable of displaying properly designed shape memory effects. Networks based on PCL 10 kDa and PEG 3 kDa showed suitable thermal and mechanical properties with well-separated crystallization and melting regions to achieve a self-standing two-way shape memory effect. Particularly, after the application of a specific thermomechanical history, these materials are capable of cyclically changing their shape between two configurations upon cooling-heating cycles in the absence of any external load applied. The effect of the composition of the networks and of the employed thermomechanical parameters, such as the applied strain and the actuation temperature, was investigated to shed light on the shape memory mechanism for this class of materials, which are considered promising for applications in the biomedical field and as reversible actuators for soft robotics

Multi-material 3D printed shape memory polymer with tunable melting and glass transition temperature activated by heat or light

Shape memory polymers are attractive smart materials that have many practical applications and academic interest. Three-dimensional (3D) printable shape memory polymers are of great importance for the fabrication of soft robotic devices due to their ability to build complex 3D structures with desired shapes. We present a 3D printable shape memory polymer, with controlled melting and transition temperature, composed of methacrylated polycaprolactone monomers and N-Vinylcaprolactam reactive diluent. Tuning the ratio between the monomers and the diluents resulted in changes in melting and transition temperatures by 20, and 6 °C, respectively. The effect of the diluent addition on the shape memory behavior and mechanical properties was studied, showing above 85% recovery ratio, and above 90% fixity, when the concentration of the diluent was up to 40 wt %. Finally, we demonstrated multi-material printing of a 3D structure that can be activated locally, at two different temperatures, by two different stimuli; direct heating and light irradiation. The remote light activation was enabled by utilizing a coating of Carbon Nano Tubes (CNTs) as an absorbing material, onto sections of the printed objects