Energy for Sustainable Development: The Energy–Poverty–Climate Nexus

Worldwide, 1.4 billion people lack access to electricity, and 2.7 billion people rely on traditional biomass for cooking. Most people living in energy poverty—without electricity access and/or using traditional biomass for cooking—are from rural areas of Sub-Saharan Africa, India, and other developing Asian countries (excluding China). At the same time, the poorest people are the most likely to suffer from the impacts of climate change

Boosting landfill gas production from lignin-containing wastes via termite hindgut microorganism.

Lignocellulose comprises a significant portion of municipal solid waste (MSW) - 40-70% in developed countries, including paper, wood, and yard waste. Cellulose and hemicellulose are often shielded by lignin, posing a barrier to waste decomposition and landfill gas generation. Unfortunately, lignin is resistant to microbial degradation under low-oxygen conditions that normally occur in MSW landfills. The bacterium strain TAV5, microaerophilic and member of phylum Verrucomicrobia, isolated from the hindgut of the Reticulitermes flavipes termite, the most widely distributed subterranean termite in North America. Its genome contains genes associated with methylotrophic competency which code for enzymes that structurally modify lignin. The overall goal of this research was to use TAV5 to modify lignin and boost methane production from MSW. Batch-scale reactors (125 mL) were filled with paper, yard, or wood waste, and four ratios of mixed of waste. Reactors were seeded with different ratios of TAV5 to anaerobic digester (AD) microorganisms (representing landfill anaerobic microorganisms). Based on batch tests, optimal ratios of TAV5 to AD microorganisms were used to seed wastes (mixed, yard, and wood) in 6-gallon reactors. Addition of TAV5 increased methane production from mixed waste, yard waste, and wood, by 49%, 34%, and 297%, respectively. TAV5 decreased acid soluble lignin by 7-39%, depending on waste type. TAV5 grown under aerobic conditions and room temperature (not requiring a heated anaerobic chamber) was found to remain viable and increase methane production under low-level oxygen conditions (1-2%). This finding will potentially lessen costs for growing large volumes of it for seeding landfills

The discovery of I-BRD9, a selective cell active chemical probe for bromodomain containing protein 9 inhibition

Acetylation of histone lysine residues is one of the most well-studied post-translational modifications of chromatin, selectively recognized by bromodomain “reader” modules. Inhibitors of the bromodomain and extra terminal domain (BET) family of bromodomains have shown profound anticancer and anti-inflammatory properties, generating much interest in targeting other bromodomain-containing proteins for disease treatment. Herein, we report the discovery of I-BRD9, the first selective cellular chemical probe for bromodomain-containing protein 9 (BRD9). I-BRD9 was identified through structure-based design, leading to greater than 700-fold selectivity over the BET family and 200-fold over the highly homologous bromodomain-containing protein 7 (BRD7). I-BRD9 was used to identify genes regulated by BRD9 in Kasumi-1 cells involved in oncology and immune response pathways and to the best of our knowledge, represents the first selective tool compound available to elucidate the cellular phenotype of BRD9 bromodomain inhibition

Mitochondrial physiology

As the knowledge base and importance of mitochondrial physiology to evolution, health and disease expands, the necessity for harmonizing the terminology concerning mitochondrial respiratory states and rates has become increasingly apparent. The chemiosmotic theory establishes the mechanism of energy transformation and coupling in oxidative phosphorylation. The unifying concept of the protonmotive force provides the framework for developing a consistent theoretical foundation of mitochondrial physiology and bioenergetics. We follow the latest SI guidelines and those of the International Union of Pure and Applied Chemistry (IUPAC) on terminology in physical chemistry, extended by considerations of open systems and thermodynamics of irreversible processes. The concept-driven constructive terminology incorporates the meaning of each quantity and aligns concepts and symbols with the nomenclature of classical bioenergetics. We endeavour to provide a balanced view of mitochondrial respiratory control and a critical discussion on reporting data of mitochondrial respiration in terms of metabolic flows and fluxes. Uniform standards for evaluation of respiratory states and rates will ultimately contribute to reproducibility between laboratories and thus support the development of data repositories of mitochondrial respiratory function in species, tissues, and cells. Clarity of concept and consistency of nomenclature facilitate effective transdisciplinary communication, education, and ultimately further discovery

Mitochondrial physiology

As the knowledge base and importance of mitochondrial physiology to evolution, health and disease expands, the necessity for harmonizing the terminology concerning mitochondrial respiratory states and rates has become increasingly apparent. The chemiosmotic theory establishes the mechanism of energy transformation and coupling in oxidative phosphorylation. The unifying concept of the protonmotive force provides the framework for developing a consistent theoretical foundation of mitochondrial physiology and bioenergetics. We follow the latest SI guidelines and those of the International Union of Pure and Applied Chemistry (IUPAC) on terminology in physical chemistry, extended by considerations of open systems and thermodynamics of irreversible processes. The concept-driven constructive terminology incorporates the meaning of each quantity and aligns concepts and symbols with the nomenclature of classical bioenergetics. We endeavour to provide a balanced view of mitochondrial respiratory control and a critical discussion on reporting data of mitochondrial respiration in terms of metabolic flows and fluxes. Uniform standards for evaluation of respiratory states and rates will ultimately contribute to reproducibility between laboratories and thus support the development of data repositories of mitochondrial respiratory function in species, tissues, and cells. Clarity of concept and consistency of nomenclature facilitate effective transdisciplinary communication, education, and ultimately further discovery

Boosting landfill gas production from lignin-containing wastes via termite hindgut microorganism.

Lignocellulose comprises a significant portion of municipal solid waste (MSW) - 40-70% in developed countries, including paper, wood, and yard waste. Cellulose and hemicellulose are often shielded by lignin, posing a barrier to waste decomposition and landfill gas generation. Unfortunately, lignin is resistant to microbial degradation under low-oxygen conditions that normally occur in MSW landfills. The bacterium strain TAV5, microaerophilic and member of phylum Verrucomicrobia, isolated from the hindgut of the Reticulitermes flavipes termite, the most widely distributed subterranean termite in North America. Its genome contains genes associated with methylotrophic competency which code for enzymes that structurally modify lignin. The overall goal of this research was to use TAV5 to modify lignin and boost methane production from MSW. Batch-scale reactors (125 mL) were filled with paper, yard, or wood waste, and four ratios of mixed of waste. Reactors were seeded with different ratios of TAV5 to anaerobic digester (AD) microorganisms (representing landfill anaerobic microorganisms). Based on batch tests, optimal ratios of TAV5 to AD microorganisms were used to seed wastes (mixed, yard, and wood) in 6-gallon reactors. Addition of TAV5 increased methane production from mixed waste, yard waste, and wood, by 49%, 34%, and 297%, respectively. TAV5 decreased acid soluble lignin by 7-39%, depending on waste type. TAV5 grown under aerobic conditions and room temperature (not requiring a heated anaerobic chamber) was found to remain viable and increase methane production under low-level oxygen conditions (1-2%). This finding will potentially lessen costs for growing large volumes of it for seeding landfills

Mobile measurement of methane and hydrogen sulfide at natural gas production site fence lines in the Texas Barnett Shale

<div><p>Production of natural gas from shale formations is bringing drilling and production operations to regions of the United States that have seen little or no similar activity in the past, which has generated considerable interest in potential environmental impacts. This study focused on the Barnett Shale Fort Worth Basin in Texas, which saw the number of gas-producing wells grow from 726 in 2001 to 15,870 in 2011. This study aimed to measure fence line concentrations of methane and hydrogen sulfide at natural gas production sites (wells, liquid storage tanks, and associated equipment) in the four core counties of the Barnett Shale (Denton, Johnson, Tarrant, and Wise). A mobile measurement survey was conducted in the vicinity of 4788 wells near 401 lease sites, representing 35% of gas production volume, 31% of wells, and 38% of condensate production volume in the four-county core area. Methane and hydrogen sulfide concentrations were measured using a Picarro G2204 cavity ring-down spectrometer (CRDS). Since the research team did not have access to lease site interiors, measurements were made by driving on roads on the exterior of the lease sites. Over 150 hr of data were collected from March to July 2012. During two sets of drive-by measurements, it was found that 66 sites (16.5%) had methane concentrations >3 parts per million (ppm) just beyond the fence line. Thirty-two lease sites (8.0%) had hydrogen sulfide concentrations >4.7 parts per billion (ppb) (odor recognition threshold) just beyond the fence line. Measured concentrations generally did not correlate well with site characteristics (natural gas production volume, number of wells, or condensate production). t tests showed that for two counties, methane concentrations for dry sites were higher than those for wet sites. Follow-up study is recommended to provide more information at sites identified with high levels of methane and hydrogen sulfide. </p><p></p><p>Implications:</p><p>Information regarding air emissions from shale gas production is important given the recent increase in number of wells in various regions in the United States. Methane, the primary natural gas constituent, is a greenhouse gas; hydrogen sulfide, which can be present in gas condensate, is an odor-causing compound. This study surveyed wells representing one-third of the natural gas production volume in the Texas Barnett Shale and identified the percent of sites that warrant further study due to their fence line methane and hydrogen sulfide concentrations.</p><p></p><p></p></div

Air Impacts From Three Alternatives For Producing JP-8 Jet Fuel

To increase U.S. petroleum energy independence, the University of Texas at Arlington (UT Arlington) has developed a direct coal liquefaction process which uses a hydrogenated solvent and a proprietary catalyst to convert lignite coal to crude oil. This sweet crude can be refined to form JP-8 military jet fuel, as well as other end products like gasoline and diesel. This paper presents an analysis of air pollutants resulting from using UT Arlington\u27s liquefaction process to produce crude and then JP-8, compared with 2 alternative processes: conventional crude extraction and refining (CCER), and the Fischer-Tropsch process. For each of the 3 processes, air pollutant emissions through production of JP-8 fuel were considered, including emissions from upstream extraction/production, transportation, and conversion/refining. Air pollutants from the direct liquefaction process were measured using a LandTEC GEM2000 Plus, Draeger color detector tubes, OhioLumex RA-915 Light Hg Analyzer, and SRI 8610 gas chromatograph with thermal conductivity detector.According to the screening analysis presented here, producing jet fuel from UT Arlington crude results in lower levels of pollutants compared to international conventional crude extraction/refining. Compared to US domestic CCER, the UTA process emits lower levels of CO2-e, NOx, and Hg, and higher levels of CO and SO2. Emissions from the UT Arlington process for producing JP-8 are estimated to be lower than for the Fischer-Tropsch process for all pollutants, with the exception of CO2-e, which were high for the UT Arlington process due to nitrous oxide emissions from crude refining. When comparing emissions from conventional lignite combustion to produce electricity, versus UT Arlington coal liquefaction to make JP-8 and subsequent JP-8 transport, emissions from the UT Arlington process are estimated to be lower for all air pollutants, per MJ of power delivered to the end user.The United States currently imports two-thirds of its crude oil, leaving its transportation system especially vulnerable to disruptions in international crude supplies. At current use rates, U.S. coal reserves (262 billion short tons, including 23 billion short tons lignite) would last 236 years. Accordingly, the University of Texas at Arlington (UT Arlington) has developed a process that converts lignite to crude oil, at about half the cost of regular crude. According to the screening analysis presented here, producing jet fuel from UT Arlington crude generates lower levels of pollutants compared to international conventional crude extraction/refining (CCER). © 2012 Copyright 2012 A&WMA

Analysis And Comparison Of Inertinite-derived Adsorbent With Conventional Adsorbents

To increase U.S. petroleum energy-independence, the University of Texas at Arlington (UT Arlington) has developed a coal liquefaction process that uses a hydrogenated solvent and a proprietary catalyst to convert lignite coal to crude oil. This paper reports on part of the environmental evaluation of the liquefaction process: the evaluation of the solid residual from liquefying the coal, called inertinite, as a potential adsorbent for air and water purification. Inertinite samples derived from Arkansas and Texas lignite coals were used as test samples. In the activated carbon creation process, inertinite samples were heated in a tube furnace (Lindberg, Type 55035, Arlington, UT) at temperatures ranging between 300 and 850°C for time spans of 60, 90, and 120min, using steamand carbon dioxide as oxidizing gases. Activated inertinite samples were then characterized by ultra-high-purity nitrogen adsorption isotherms at 77 K using a high-speed surface area and pore size analyzer (Quantachrome, Nova 2200e, Kingsville, TX). Surface area and total pore volume were determined using the Brunauer, Emmet, and Teller method, for the inertinite samples, as well as for four commercially available activated carbons (gas-phase adsorbents Calgon Fluepac-B and BPL 4 x 6; liquid-phase adsorbents Filtrasorb 200 and Carbsorb 30). In addition, adsorption isotherms were developed for inertinite and the two commercially available gas-phase carbons, using methyl ethyl ketone (MEK) as an example compound. Adsorption capacity was measured gravimetrically with a symmetric vapor sorption analyzer (VTI, Inc., Model SGA-100, Kingsville, TX). Also, liquid-phase adsorption experiments were conducted using methyl orange as an example organic compound. The study showed that using inertinite fromcoal can be beneficially reused as an adsorbent for airorwater pollution control, although its surface area and adsorption capacity are not as high as those for commercially available activated carbons. Implications: The United States currently imports two-thirds of its crude oil, leaving its transportation system especially vulnerable to disruptions in international crude supplies. UT Arlington has developed a liquefaction process that converts coal, abundant in the United States, to crude oil. This work demonstrated that the undissolvable solid coal residual from the liquefaction process, called inertinite, can be converted to an activated carbon adsorbent. Although its surface area and adsorption capacity are not as high as those for commercially available carbons, the inertinite source material would be available at no cost, and its beneficial reuse would avoid the need for disposal. Supplemental Materials: Supplemental materials are available for this article. Go to the publisher\u27s online edition of the Journal of the Air & Waste Management Association for properties of the commercial activated carbons tested in this study. © 2012 A&WMA