552 research outputs found
Dynamics of highly unbalanced Bose-Bose mixtures: miscible vs immiscible gases
We study the collective modes of the minority component of a highly
unbalanced Bose-Bose mixtures. In the miscible case the minority component
feels an effective external potential and we derive an analytical expression
for the mode frequencies. The latter is independent of the minority component
interaction strength. In the immiscible case we find that the ground state can
be a two-domain walls soliton. Although the mode frequencies are continuous at
the transition, their behaviour is very different with respect to the miscible
case. The dynamical behaviour of the solitonic structure and the frequency
dependence on the inter- and intra-species interaction is numerically studied
using coupled Gross-Pitaevskii equations.Comment: 6 pages, 10 figure
In vitro degradability, gas production, and energy value of different hybrids of sorghum after storage in mini-silos
Analysis of the Surface Integrity in Cryogenic Turning of Ti6Al4 v Produced by Direct Melting Laser Sintering
The Ti6Al4V is widely utilized in the biomedical field thanks to its high biocompatibility, however, due to its low machinability, is classified as a difficult-to-cut material. With the goal of improving the surface quality of biomedical components made of Ti6Al4V produced by the DMLS additive manufacturing technology and later on machined, Liquid Nitrogen was tested as a coolant in semi-finishing turning. The integrity of the machined surfaces is evaluated in terms of surface defects and topography as well as residual stresses. The obtained results showed that the cryogenic machining assured a lower amount of surface defects and higher values of the residual compressive stressed compared to dry cutting, but a general worsening of the surface topography was detected
The guilty brain: the utility of neuroimaging and neurostimulation studies in forensic field
Several studies have aimed to address the natural inability of humankind to detect deception and accurately discriminate lying from truth in the legal context. To date, it has been well established that telling a lie is a complex mental activity. During deception, many functions of higher cognition are involved: the decision to lie, withholding the truth, fabricating the lie, monitoring whether the receiver believes the lie, and, if necessary, adjusting the fabricated story and maintaining a consistent lie. In the previous 15 years, increasing interest in the neuroscience of deception has resulted in new possibilities to investigate and interfere with the ability to lie directly from the brain. Cognitive psychology, as well as neuroimaging and neurostimulation studies, are increasing the possibility that neuroscience will be useful for lie detection. This paper discusses the scientific validity of the literature on neuroimaging and neurostimulation regarding lie detection to understand whether scientific findings in this field have a role in the forensic setting. We considered how lie detection technology may contribute to addressing the detection of deception in the courtroom and discussed the conditions and limits in which these techniques reliably distinguish whether an individual is lying
Metodi di caratterizzazione di nanoparticelle magnetiche per applicazioni di Magneto Fluido Ipertermia
L’obiettivo di questo lavoro è l’analisi della letteratura esistente sulla misura dei meccanismi di riscaldamento di ferrofluidi soggetti all’azione di un campo magnetico tempo-variante. Sono stati inoltre presentati i metodi di caratterizzazione delle nanoparticelle con i relativi risultati della letteratura. La parte sperimentale è consistita nella caratterizzazione di campioni commerciali di NPs, successivamente nella creazione di un sistema per la misura del loro riscaldamentoope
Massive choleperitoneum three months after mini-gastric bypass for morbid obesity: what every emergency surgeon should be prepared to face. A case report.
Background:
Surgery for morbid obesity has spread worldwide, to the point that more than half a million people are operated on each year. As a result, significant numbers of people are living with a new anatomical condition. A mini-gastric bypass is a relatively new bariatric procedure that has gained popularity because of its simplicity and efficacy. Leak rate after this procedure is relatively low (on the order of 1.6%), but marginal ulcer of gastrojejunal anastomosis, if undetected, may lead to leak development.
No cases of delayed massive choleperitoneum caused by an almost complete disruption of gastrojejunal anastomosis after mini-gastric bypass have yet been described.
Case presentation:
We describe here the case of a 51-year-old woman who presented at the emergency department three months after a mini-gastric bypass with acute abdomen caused by massive choleperitoneum due to an almost complete disruption of gastrojejunal anastomosis.
The patient underwent an emergency conversion to a Roux-en-Y laparoscopic gastric bypass with associated re-gastrectomy. The postoperative period was characterized by fever due to an infected left pleural effusion, which required treatment with chest tube placement. The patient was discharged three weeks after the operation, in good condition. Six-month follow-up was regular.
Conclusions:
If suspected, the possibility of marginal ulcer should be investigated as soon as possible. When possible, every obese patient who has complications should be referred to a bariatric surgery department, but each emergency surgeon must be aware of these conditions to be able to treat them optimally
Tractor cabin ergonomics analyses by means of Kinect motion capture technology
Kinect is the de facto standard for real-time depth sensing and motion capture cameras. The sensor is here proposed for exploiting body tracking during driving operations. The motion capture system was developed taking advantage of the Microsoft software development kit (SDK), and implemented for real-time monitoring of body movements of a beginner and an expert tractor drivers, on different tracks (straight and with curves) and with different driving conditions (manual and assisted steering). Tests show how analyses can be done not only in terms of absolute movements, but also in terms of relative shifts, allowing for quantification of angular displacements or rotations
Deal2lkit: a Toolkit Library for High Performance Programming in deal.II
We propose a software design for the efficient and flexible handling of the building blocks used in high performance finite element simulations, through the pervasive use of parameters (parsed through parameter files). In the proposed design, all the building blocks of a high performance finite element program are built according to the command and composite design patterns.We present version 1.1.0 of the deal2lkit (deal.II ToolKit) library, which is a collection of modules and classes aimed at providing high level interfaces to several deal.II classes and functions, obeying the command and composite design patterns, and controlled via parameter files. Keywords: Object-orientation, Software design, Finite element methods, C+
- …