20 research outputs found
Effects of Oxygen Partial Pressure on the Surface Tension of Liquid Nickel
The NASA Marshall Space Flight Center's electrostatic levitation (ESL) laboratory has been recently upgraded with an oxygen partial pressure controller. This system allows the oxygen partial pressure within the vacuum chamber to be measured and controlled, theoretically in the range from 1036 to 100 bar. The oxygen control system installed in the ESL laboratory's main chamber consists of an oxygen sensor, oxygen pump, and a control unit. The sensor is a potentiometric device that determines the difference in oxygen activity in two gas compartments (inside the chamber and the air outside of the chamber) separated by an electrolyte, which is yttriastabilized zirconia. The pump utilizes coulometric titration to either add or remove oxygen. The system is controlled by a desktop control unit, which can also be accessed via a computer. The controller performs temperature control for the sensor and pump, PID-based current loop, and a control algorithm. Oxygen partial pressure has been shown to play a significant role in the surface tension of liquid metals. Oxide films or dissolved oxygen may lead to significant changes in surface tension. The effects of oxygen partial pressure on the surface tension of undercooled liquid nickel will be analyzed, and the results will be presented. The surface tension will be measured at several different oxygen partial pressures while the sample is undercooled. Surface tension will be measured using the oscillating drop method. While undercooled, each sample will be oscillated several times consecutively to investigate how the surface tension behaves with time while at a particular oxygen partial pressure
Materials Research in Microgravity 2012
Reducing gravitational effects such as thermal and solutal buoyancy enables investigation of a large range of different phenomena in materials science. The Symposium on Materials Research in Microgravity involved 6 sessions composed of 39 presentations and 14 posters with contributions from more than 14 countries. The sessions concentrated on four different categories of topics related to ongoing reduced-gravity research. Highlights from this symposium will be featured in the September 2012 issue of JOM. The TMS Materials Processing and Manufacturing Division, Process Technology and Modeling Committee and Solidification Committee sponsored the symposium
Lightweight Damage Tolerant High-Temperature Radiators for Space Propulsion
No abstract availabl
Reduced-Gravity Measurements of the Effect of Oxygen on Properties of Zirconium
The influence of oxygen on the thermophysical properties of zirconium is being investigated using MSL-EML (Material Science Laboratory - Electromagnetic Levitator) on ISS (International Space Station) in collaboration with NASA, ESA (European Space Agency), and DLR (German Aerospace Center). Zirconium samples with different oxygen concentrations will be put into multiple melt cycles, during which the density, viscosity, surface tension, heat capacity, and electric conductivity will be measured at various undercooled temperatures. The facility check-up of MSL-EML and the first set of melting experiments have been successfully performed in 2015. The first zirconium sample will be tested near the end of 2015. As part of ground support activities, the thermophysical properties of zirconium and ZrO were measured using a ground-based electrostatic levitator located at the NASA Marshall Space Flight Center. The influence of oxygen on the measured surface tension was evaluated. The results of this research will serve as reference data for those measured in ISS
Thermophysical Properties of Nickel-Based Superalloys
The NASA Marshall Space Flight Center (MSFC) electrostatic levitation (ESL) laboratory has a long history of providing materials research and thermophysical property data. The lab can measure thermophysical properties such as density, surface tension, and viscosity of liquid materials, including elements, alloys, glasses, ceramics, and oxides. Nickel-based superalloys (e.g. Inconel, Hastelloy, and Waspaloy) have many high performance applications, including turbine engines for aerospace. Superalloy parts are typically manufactured by casting and forging. These processes generate both polycrystalline and monocrystalline parts. A relatively new method of fabrication of turbine disk materials is additive manufacturing, which is typically done for aerospace parts by powder-bed methods such as selective laser melting (SLM). Accurate modeling of casting and forging, as well as additively manufacturing processes, require thermophysical properties (density, surface tension, and viscosity). The thermophysical properties of liquid nickel-based superalloys, both conventional and additively manufactured, were measured at several temperatures in both undercooled and superheated condition. Surface tension and viscosity was measured using the oscillating drop method and density and thermal expansion was measured using edge detection methods
Effect of mass evaporation on measurement of liquid density of Ni-based superalloys using ground and space levitation techniques
Loss of mass due to evaporation during molten metal levitation processing
significantly influences the evaluation of density, viscosity and surface
tension during thermophysical property measurement. Since there is no
direct way to track the evaporation rate during the process, this paper
describes a mathematical approach to track mass loss and quantify any
changes in alloy composition as a function of time and temperature. The
Ni-based super alloy CMSX-4 Plus (SLS) was investigated and a model
was developed to predict the dynamic loss of mass with time and track the
potential for composition shifts throughout each thermal cycle based on
the Langmuir’s equation for ideal solution behavior. Results were verified
by post-test chemical analysis of key elemental constituents including Al,
Cr, Ti, and Co where the error in composition for each element was less
than 1 % when the activity of aluminum in solution was fixed at zero -
effectively eliminating evaporation of aluminum for ground-based electrostatic levitation (ESL) testing in vacuum. This model predicts the mass
evaporation for Al and Co within +/- 6% errors for CMSX-4 plus samples
processed in ESL. Application of this technique to the space tests using
the ESA ISS-EML facility shows that by conducting experiments in an
inert shielding-gas environment, composition shifts due to differential
relative evaporation become negligible and the composition is maintained
within the desired limits. By tracking overall mass loss during testing the
influence of evaporation on density measurements is discussed