Attraction between like-charged colloidal particles induced by a surface a density - functional analysis

We show that the first non-linear correction to the linearised Poisson-Boltzman n (or DLVO) theory of effective pair interactions between charge-stabilised, co lloidal particles near a charged wall leads to an attractive component of entro pic origin. The position and depth of the potential compare favourably with rec ent experimental measurementsComment: 12 pages including 2 figures. submitted to physical review letter

Position and Mode Dependent Optical Detection Back-Action in Cantilever Beam Resonators

Optical detection back-action in cantilever resonant or static detection presents a challenge when striving for state-of-the-art performance. The origin and possible routes for minimizing optical back-action have received little attention in literature. Here, we investigate the position and mode dependent optical back-action on cantilever beam resonators. A high power heating laser (100 {\mu}W) is scanned across a silicon nitride cantilever while its effect on the first three resonance modes is detected via a low-power readout laser (1 {\mu}W) positioned at the cantilever tip. We find that the measured effect of back-action is not only dependent on position but also the shape of the resonance mode. Relevant silicon nitride material parameters are extracted by fitting the temperature-dependent frequency response of the first three modes to finite element (FE) simulations. In a second round of simulations, using the extracted parameters, we successfully fit the FEM results with the measured mode and position dependent back-action. Finally, different routes for minimizing the effect of this optical detection back-action are described, allowing further improvements of cantilever-based sensing in general

Stress-Induced Variations in the Stiffness of Micro- and Nanocantilever Beams

The effect of surface stress on the stiffness of cantilever beams remains an outstanding problem in the physical sciences. While numerous experimental studies report significant stiffness change due to surface stress, theoretical predictions are unable to rigorously and quantitatively reconcile these observations. In this Letter, we present the first controlled measurements of stress-induced change in cantilever stiffness with commensurate theoretical quantification. Simultaneous measurements are also performed on equivalent clamped-clamped beams. All experimental results are quantitatively and accurately predicted using elasticity theory. We also present conclusive experimental evidence for invalidity of the longstanding and unphysical axial force model, which has been widely applied to interpret measurements using cantilever beams. Our findings will be of value in the development of micro- and nanoscale resonant mechanical sensors

The Role of Nonlinear Dynamics in Quantitative Atomic Force Microscopy

Various methods of force measurement with the Atomic Force Microscope (AFM) are compared for their ability to accurately determine the tip-surface force from analysis of the nonlinear cantilever motion. It is explained how intermodulation, or the frequency mixing of multiple drive tones by the nonlinear tip-surface force, can be used to concentrate the nonlinear motion in a narrow band of frequency near the cantilevers fundamental resonance, where accuracy and sensitivity of force measurement are greatest. Two different methods for reconstructing tip-surface forces from intermodulation spectra are explained. The reconstruction of both conservative and dissipative tip-surface interactions from intermodulation spectra are demonstrated on simulated data.Comment: 25 pages (preprint, double space) 7 figure

Mechano-chemical manipulation of Sn chains on Si(1 0 0) by NC-AFM

We investigate the atomic structure of Sn dimer chains grown on the Si(1 0 0) surface using non-contact atomic force microscopy (NC-AFM) at cryogenic temperatures. We find that similar to the native Si(1 0 0) dimer structure, the ground state of the Sn dimer structure is buckled at low temperature. At 5 K we show that the buckling state of the Sn dimers may be controllably, and reversibly, manipulated with atomic precision by close approach of the tip, without modification of the underlying substrate buckling structure. At intermediate cryogenic temperatures we observe changes in the configuration of the dimer chains in the region where the tip-sample interaction is very weak, suggesting that the energy barrier to transit between configurations is sufficiently small to be surmounted at 78 K

Like-charge attraction through hydrodynamic interaction

We demonstrate that the attractive interaction measured between like-charged colloidal spheres near a wall can be accounted for by a nonequilibrium hydrodynamic effect. We present both analytical results and Brownian dynamics simulations which quantitatively capture the one-wall experiments of Larsen and Grier (Nature 385, p. 230, 1997).Comment: 10 pages, 4 figure

Telavancin activity when tested by a revised susceptibility testing method against uncommonly isolated Gram-positive pathogens responsible for documented infections in hospitals worldwide (2011–2013)

AbstractThe broth microdilution method for telavancin susceptibility testing was revised and now utilises DMSO as solvent for stock solution preparation and diluent for stock solution dilution, following CLSI guidelines for water-insoluble agents. The revised method also incorporates polysorbate 80 in the test medium to mitigate drug binding to plastics. This revised methodology provides more accurate and reproducible MIC determinations, which results in values lower than the previously established method. This study was conducted to re-establish telavancin potencies and susceptibility profiles (using updated interpretive criteria) against a collection of uncommon clinical pathogens (3821 isolates). Telavancin showed MIC50 values of 0.06mg/L against tested staphylococcal species (MIC50/90, 0.03/0.06mg/L; 98.1–100.0% susceptible), with lower results for Staphylococcus hominis (MIC50, ≤0.015mg/L), Staphylococcus lugdunensis (MIC50, ≤0.015mg/L) and Staphylococcus simulans (MIC50, 0.03mg/L). Vancomycin (MIC50, 1mg/L), daptomycin (MIC50, 0.12–1mg/L) and linezolid (MIC50, 0.25–1mg/L) had MIC50 results at least four-fold higher than telavancin against CoNS. Streptococci (99.2–100.0% susceptible) displayed telavancin MIC50 values of ≤0.015–0.03mg/L. Vancomycin (MIC50, 0.25–0.5mg/L) and linezolid (MIC50, 0.5–1mg/L) had higher MIC50 results against streptococci, whilst daptomycin MIC50 values varied from ≤0.06mg/L to 0.5mg/L. Micrococcus, Listeria and Corynebacterium spp. were inhibited by telavancin at ≤0.015, ≤0.03 and ≤0.06mg/L, respectively. Telavancin exhibited potent in vitro activity against this collection, greater than comparators (daptomycin, linezolid, vancomycin). This study provides new baseline MIC results for telavancin and confirms the spectrum and potency of telavancin against less commonly encountered Gram-positive species