277 research outputs found

    Two-Dimensional Hydrodynamic Models of Super Star Clusters with a Positive Star Formation Feedback

    Full text link
    Using the hydrodynamic code ZEUS, we perform 2D simulations to determine the fate of the gas ejected by massive stars within super star clusters. It turns out that the outcome depends mainly on the mass and radius of the cluster. In the case of less massive clusters, a hot high velocity (1000\sim 1000 km s1^{-1}) stationary wind develops and the metals injected by supernovae are dispersed to large distances from the cluster. On the other hand, the density of the thermalized ejecta within massive and compact clusters is sufficiently large as to immediately provoke the onset of thermal instabilities. These deplete, particularly in the central densest regions, the pressure and the pressure gradient required to establish a stationary wind, and instead the thermally unstable parcels of gas are rapidly compressed, by a plethora of re-pressurizing shocks, into compact high density condensations. Most of these are unable to leave the cluster volume and thus accumulate to eventually feed further generations of star formation. The simulations cover an important fraction of the parameter-space, which allows us to estimate the fraction of the reinserted gas which accumulates within the cluster and the fraction that leaves the cluster as a function of the cluster mechanical luminosity, the cluster size and heating efficiency.Comment: Accepted for publication in ApJ; 27 pages, 9 figures, 1 tabl

    NICMOS Images of the GG Tau Circumbinary Disk

    Full text link
    We present deep, near-infrared images of the circumbinary disk surrounding the pre-main-sequence binary star, GG Tau A, obtained with NICMOS aboard the Hubble Space Telescope. The spatially resolved proto-planetary disk scatters roughly 1.5% of the stellar flux, with a near-to-far side flux ratio of ~1.4, independent of wavelength, and colors that are comparable to the central source; all of these properties are significantly different from the earlier ground-based observations. New Monte Carlo scattering simulations of the disk emphasize that the general properties of the disk, such as disk flux, near side to far side flux ratio and integrated colors, can be approximately reproduced using ISM-like dust grains, without the presence of either circumstellar disks or large dust grains, as had previously been suggested. A single parameter phase function is fitted to the observed azimuthal variation in disk flux, providing a lower limit on the median grain size of 0.23 micron. Our analysis, in comparison to previous simulations, shows that the major limitation to the study of grain growth in T Tauri disk systems through scattered light lies in the uncertain ISM dust grain properties. Finally, we use the 9 year baseline of astrometric measurements of the binary to solve the complete orbit, assuming that the binary is coplanar with the circumbinary ring. We find that the estimated 1 sigma range on disk inner edge to semi-major axis ratio, 3.2 < Rin/a < 6.7, is larger than that estimated by previous SPH simulations of binary-disk interactions.Comment: 40 pages, 8 postscript figures, accepted for publication in Ap

    Dust Size Growth and Settling in a Protoplanetary Disk

    Full text link
    We have studied dust evolution in a quiescent or turbulent protoplanetary disk by numerically solving coagulation equation for settling dust particles, using the minimum mass solar nebular model. As a result, if we assume an ideally quiescent disk, the dust particles settle toward the disk midplane to form a gravitationally unstable layer within 2x10^3 - 4x10^4 yr at 1 - 30 AU, which is in good agreement with an analytic calculation by Nakagawa, Sekiya, & Hayashi (1986) although they did not take into account the particle size distribution explicitly. In an opposite extreme case of a globally turbulent disk, on the other hand, the dust particles fluctuate owing to turbulent motion of the gas and most particles become large enough to move inward very rapidly within 70 - 3x10^4 yr at 1 - 30 AU, depending on the strength of turbulence. Our result suggests that global turbulent motion should cease for the planetesimal formation in protoplanetary disks.Comment: 27 pages, 8 figures, accepted for publication in the Ap

    Reducing the risk of iatrogenic Creutzfeldt–Jakob disease by improving the cleaning of neurosurgical instruments

    Get PDF
    Background: In all, there have been 178 variant Creutzfeldt–Jakob disease (vCJD) patients diagnosed in the UK, with an estimated maximum 1:2000 carriage rate based on archived appendix and tonsil tissue, implying that infection may be rare but carriage relatively frequent. Previous workers have identified that maintenance of surgical instruments in a humid atmosphere after use and prior to cleaning assists cleaning efficacy. Recently the Department of Health/Advisory Committee on Dangerous Pathogens UK have recommended a surgical instrument cleanliness threshold post cleaning of &lt;5 μg protein per instrument side. Aim: To quantify cleanliness of neurosurgical instruments and to investigate cost-effective measures for improved cleaning. Methods: Two instrument protein quantification methods were used: one based on the International Standard (15883 series) using sodium dodecyl sulphate elution and ortho-phthalaldehyde reaction, and a second in-situ protein fluorescence detection system (ProReveal) providing results per instrument side. In-vitro investigation of the efficacy of some commercial and in-house pre-clean wetting agents was undertaken using artificial test soil and stainless steel discs under standard conditions. In-vivo evaluation of best-performing in-vitro agents was undertaken on craniotomy sets. Findings: ProReveal technology demonstrated that 163 out of 187 (87%) neurosurgical instruments had &lt;5 μg residual protein per instrument side. The use of proprietary National Health Service plastic bags and sterile water-soaked wound pads were equivalent in efficacy to commercial pre-cleaning wetting products and significantly less expensive. Conclusion: Although we demonstrate low in-situ protein levels on neurosurgical instruments and the beneficial effects of keeping instruments moist, other cleaning critical-control points such as instrument loading patterns should also be monitored

    Optical and Near Infrared Study of the Cepheus E outflow, a very low excitation object

    Get PDF
    We present images and spectra of the Cepheus E (Cep E) region at both optical and infrared wavelengths. Only the brightest region of the southern lobe of the Cep E outflow reveals optical emission, suggesting that the extinction close to the outflow source plays an important r\^ole in the observed difference between the optical and IR morphologies. Cep E is a unique object since it provides a link between the spectroscopic properties of the optical Herbig-Haro (HH) objects and those of deeply embedded outflows.Comment: Accepted Astron. J., 8 files: paper, tables plus 6 figure

    The Stability of Radiatively Cooled Jets in Three Dimensions

    Get PDF
    The effect of optically thin radiative cooling on the Kelvin-Helmholtz instability of three dimensional jets is investigated via linear stability theory and nonlinear hydrodynamical simulation. Two different cooling functions are considered: radiative cooling is found to have a significant effect on the stability of the jet in each case. The wavelengths and growth rates of unstable modes in the numerical simulations are found to be in good agreement with theoretical predictions. Disruption of the jet is found to be sensitive to the precessional frequency at the origin with lower frequencies leading to more rapid disruption. Strong nonlinear effects are observed as the result of the large number of normal modes in three dimensions which provide rich mode-mode interactions. These mode-mode interactions provide new mechanisms for the formation of knots in the flows. Significant structural features found in the numerical simulations appear similar to structures observed on protostellar jets.Comment: 32 pages, 13 figures, figures included in page tota

    MHD Models of Axisymmetric Protostellar Jets

    Full text link
    We present the results of a series of axisymmetric time-dependent magnetohydrodynamic (MHD) simulations of the propagation of cooling, overdense jets, motivated by the properties of outflows associated with young stellar objects. A variety of initial field strengths and configurations are explored for both steady and time-variable (pulsed) jets. Even apparently weak magnetic fields with strengths B < 60 micro-G in the pre-shocked jet beam can have a significant effect on the dynamics, for example by altering the density, width, and fragmentation of thin shells formed by cooling gas. A linear analysis predicts that axisymmetric pinch modes of the MHD Kelvin-Helmholtz instability should grow only slowly for the highly supermagnetosonic jets studied here; we find no evidence for them in our simulations. Some of our models appear unstable to current-driven pinch modes, however the resulting pressure and density variations induced in the jet beam are not large, making this mechanism an unlikely source of emission knots in the jet beam. In the case of pulsed jets, radial hoop stresses confine shocked jet material in the pulses to the axis, resulting in a higher density in the pulses in comparison to purely hydrodynamic models.Comment: 28 pages, 16 figures, accepted by Ap.

    Dust flow in gas disks in the presence of embedded planets

    Get PDF
    We study the dynamics of gas and dust in a protoplanetary disk in the presence of embedded planets. We investigate the conditions for dust-gap formation in terms of particle size and planetary mass. We also monitor the amount of dust that is accreted by the planet relative to the amount of gas, which is an important parameter in determining the enrichment of solids in giant planets compared to the solid content of the central star. We use a new two-fluid hydrodynamics code to solve the flow equations for both gas and dust. For the gas, we use a Godunov-type scheme with an approximate Riemann solver (the Roe solver). The dust is treated as a pressureless fluid by essentially the same numerical method as is used for the gas. We find that it only takes a planet of 0.05 Jupiter masses to open up a gap in a disk with a significant population of mm-sized particles. Dust particles larger than 150 micron participate in gap formation. We also find that the formation of the gap severely slows down dust accretion compared to that in the gas. Therefore, it is not possible to enrich a newly formed giant planet in solids, if these solids are contained in particles with sizes from 150 micron to approximately 10 cm.Comment: 13 pages, 12 figures, accepted for publication in A&

    HST NICMOS Images of the HH 7/11 Outflow in NGC1333

    Full text link
    We present near infrared images in H2 at 2.12um of the HH 7/11 outflow and its driving source SVS 13 taken with HST NICMOS 2 camera, as well as archival Ha and [SII] optical images obtained with the WFPC2 camera. The NICMOS high angular resolution observations confirm the nature of a small scale jet arising from SVS 13, and resolve a structure in the HH 7 working surface that could correspond to Mach disk H2 emission. The H2 jet has a length of 430 AU (at a distance of 350 pc), an aspect ratio of 2.2 and morphologically resembles the well known DG Tau optical micro-jet. The kinematical age of the jet (approx. 10 yr) coincides with the time since the last outburst from SVS 13. If we interpret the observed H2 flux density with molecular shock models of 20-30 km/s, then the jet has a density as high as 1.e+5 cc. The presence of this small jet warns that contamination by H2 emission from an outflow in studies searching for H2 in circumstellar disks is possible. At the working surface, the smooth H2 morphology of the HH 7 bowshock indicates that the magnetic field is strong, playing a major role in stabilizing this structure. The H2 flux density of the Mach disk, when compared with that of the bowshock, suggests that its emission is produced by molecular shocks of less than 20 km/s. The WFPC2 optical images display several of the global features already inferred from groundbased observations, like the filamentary structure in HH 8 and HH 10, which suggests a strong interaction of the outflow with its cavity. The H2 jet is not detected in {SII] or Ha, however, there is a small clump at approx. 5'' NE of SVS 13 that could be depicting the presence either of a different outburst event or the north edge of the outflow cavity.Comment: 13 pages, 5 figures (JPEGs

    Clustered Star Formation in W75 N

    Get PDF
    We present 2" to 7" resolution 3 mm continuum and CO(J=1-0) line emission and near infrared Ks, H2, and [FeII] images toward the massive star forming region W75 N. The CO emission uncovers a complex morphology of multiple, overlapping outflows. A total flow mass of greater than 255 Msun extends 3 pc from end-to-end and is being driven by at least four late to early-B protostars. More than 10% of the molecular cloud has been accelerated to high velocities by the molecular flows (> 5.2 km/s relative to v{LSR}) and the mechanical energy in the outflowing gas is roughly half the gravitational binding energy of the cloud. The W75 N cluster members represent a range of evolutionary stages, from stars with no apparent circumstellar material to deeply embedded protostars that are actively powering massive outflows. Nine cores of millimeter-wavelength emission highlight the locations of embedded protostars in W75 N. The total mass of gas & dust associated with the millimeter cores ranges from 340 Msun to 11 Msun. The infrared reflection nebula and shocked H2 emission have multiple peaks and extensions which, again, suggests the presence of several outflows. Diffuse H2 emission extends about 0.6 parsecs beyond the outer boundaries of the CO emission while the [FeII] emission is only detected close to the protostars. The infrared line emission morphology suggests that only slow, non-dissociative J-type shocks exist throughout the pc-scale outflows. Fast, dissociative shocks, common in jet-driven low-mass outflows, are absent in W75 N. Thus, the energetics of the outflows from the late to early B protostars in W75 N differ from their low-mass counterparts -- they do not appear to be simply scaled-up versions of low-mass outflows.Comment: Astrophysical Journal, in press. 23 pages plus 10 figures (jpg format). See http://www.aoc.nrao.edu/~dshepher/science.shtml for reprint with full resolution figure
    corecore