35,345 research outputs found
X-Y plotter adapter developed for SDS-930 computer
Graphical Display Adapter provides a real time display for digital computerized experiments. This display uses a memory oscilloscope which records a single trace until erased. It is a small hardware unit which interfaces with the J-box feature of the SDS-930 computer to either an X-Y plotter or a memory oscilloscope
Phonons in nanocrystalline Ni3Fe
Inelastic neutron-scattering spectra were measured to obtain the phonon density of states (DOS) of nanocrystalline fcc Ni3Fe. The materials were prepared by mechanical alloying, and were also subjected to heat treatments to alter their crystallite sizes and internal strains. In comparison to material with large crystallites, the nanocrystalline material shows two distinct differences in its phonon DOS. The nanocrystalline DOS was more than twice as large at energies below 15 meV. This increase was approximately proportional to the density of grain boundaries in the material. Second, features in the nanocrystalline DOS are broadened substantially. This broadening did not depend in a simple way on the crystallite size of the sample, suggesting that it has a different physical origin than the enhancement in phonon DOS at energies below 15 meV. A damped harmonic oscillator model for the phonons provides a quality factor Qu, as low as 7 for phonons in the nanocrystalline material. The difference in vibrational entropy of the bulk and nanocrystalline Ni3Fe was small, owing to competing changes in the nanocrystalline phonon DOS at low and high energies
Low temperature coefficient of resistance and high gage factor in beryllium-doped silicon
The gage factor and resistivity of p-type silicon doped with beryllium was studied as a function of temperature, crystal orientation, and beryllium doping concentration. It was shown that the temperature coefficient of resistance can be varied and reduced to zero near room temperature by varying the beryllium doping level. Similarly, the magnitude of the piezoresistance gage factor for beryllium-doped silicon is slightly larger than for silicon doped with a shallow acceptor impurity such as boron, whereas the temperature coefficient of piezoresistance is about the same for material containing these two dopants. These results are discussed in terms of a model for the piezoresistance of compensated p-type silicon
Evaluation of commercial pyroelectric detectors
A series of commercially available pyroelectric detectors made from PVF2, LTO, SBN, and TGS were evaluated in terms of responsivity and detectivity as a function of frequency. The performance of the detectors evaluated was very different, depending upon the manufacturer of the detector, and this dependency was primarily related to the thickness of the various detectors. The best detectors of each material were comparable in performance at frequencies around 10 Hz but differed radically at frequencies above 100 Hz
Pyroelectric detector arrays
A pyroelectric detector array and the method for using it are described. A series of holes formed through a silicon dioxide layer on the surface of a silicon substrate forms the mounting fixture for the pyroelectric detector array. A series of nontouching strips of indium are formed around the holes to make contact with the backside electrodes and form the output terminals for individual detectors. A pyroelectric detector strip with front and back electrodes, respectively, is mounted over the strips. Biasing resistors are formed on the surface of the silicon dioxide layer and connected to the strips. A metallized pad formed on the surface of layer is connected to each of the biasing resistors and to the film to provide the ground for the pyroelectric detector array
Evaluation of a computer-generated perspective tunnel display for flight path following
The display was evaluated by monitoring pilot performance in a fixed base simulator with the vehicle dynamics of a CH-47 tandem rotor helicopter. Superposition of the predicted future vehicle position on the tunnel image was also investigated to determine whether, and to what extent, it contributes to better system performance (the best predicted future vehicle position was sought). Three types of simulator experiments were conducted: following a desired trajectory in the presence of disturbances; entering the trajectory from a random position, outside the trajectory; detecting and correcting failures in automatic flight. The tunnel display with superimposed predictor/director symbols was shown to be a very successful combination, which outperformed the other two displays in all three experiments. A prediction time of 4 to 7 sec. was found to optimize trajectory tracking for the given vehicle dynamics and flight condition. Pilot acceptance of the tunnel plus predictor/director display was found to be favorable and the time the pilot needed for familiarization with the display was found to be relatively short
Phonon contributions to the entropies of hP24 and fcc Co3V
Inelastic neutron-scattering spectra and neutron-diffraction patterns were measured on the alloy Co3V at temperatures from 1073-1513 K, where the hP24 (ordered hexagonal) and fee structures are the equilibrium states of the alloy. Phonon density of states (DOS) curves were calculated from the inelastic-scattering spectra, allowing estimates of the vibrational entropy in the harmonic and quasiharmonic approximations. The vibrational entropy of the hP24-fcc phase transition at 1323 K was found to be 0.07k(B)/atom. The anharmonic contributions to the entropy over a temperature range of 100 K were comparable to the vibrational entropy of this phase transition. The anharmonic softening of the phonon DOS was only slightly larger for the hP24 than the fee phase, however, so the anharmonic effects contribute only slightly to the difference in entropy of the two phases. The simple Gruneisen approximation was inadequate for predicting the thermal softening of the phonon DOS
Vibrational entropy and microstructural effects on the thermodynamics of partially disordered and ordered Ni3V
Samples of Ni3V were prepared with two microstructures: (1) with equilibrium D022 order, and (2) with partial disorder (having a large D022 chemical order parameter, but without the tetragonality of the unit cell). For both materials, we measured the difference in their heat capacities from 60 to 325 K, inelastic neutron-scattering spectra at four values of Q at 11 and at 300 K, and Young's moduli and coefficients of thermal expansion. The difference in heat capacity at low temperatures was consistent with a harmonic model using the phonon density of states (DOS) curves determined from the inelastic neutron-scattering spectra. In contrast, at temperatures greater than 160 K the difference in heat capacity did not approach zero, as expected of harmonic behavior. The temperature dependence of the phonon DOS can be used to approximately account for the anharmonic contributions to the differential heat capacity. We also argue that some of the anharmonic behavior should originate with a microstructural contribution to the heat capacity involving anisotropic thermal contractions of the D022 structure. We estimate the difference in vibrational entropy between partially disordered and ordered Ni3V to be Spdis -Sord =(+0.038±0.015)kB /atom at 300 K
A small angle neutron scattering and Mössbauer spectrometry study of magnetic structures in nanocrystalline Ni3Fe
Results are reported from small angle neutron scattering and Mössbauer spectrometry measurements on nanocrystalline Ni3Fe. The nanocrystalline materials were prepared by mechanical attrition and studied in the as-milled state, after annealing at 265 °C to relieve internal stress, and after annealing 600 °C to prepare a control sample comprising large crystals. The small angle neutron scattering (SANS) measurements were performed for a range of applied magnetic fields. Small differences were found in how the different samples reached magnetic saturation. From the SANS data obtained at magnetic saturation, we found little difference in the nuclear scattering of the as-milled material and the material annealed at 265 °C. Reductions in nuclear scattering and magnetic scattering were observed for the control sample, and this was interpreted as grain growth. The material annealed at 265 °C also showed a reduction in magnetic SANS compared to the as-milled material. This was interpreted as an increase in magnetic moments of atoms at the grain boundaries after a low temperature annealing. Both Mössbauer spectroscopy and small angle neutron scattering showed an increase in the grain boundary magnetic moments after the 265 °C annealing (0.2 and 0.4µB/atom, respectively), even though there was little change in the grain boundary atomic density
Temperature dependence of the phonon entropy of vanadium
The phonon density-of-states (DOS) of elemental vanadium was measured at elevated temperatures by inelastic neutron scattering. The phonon softening predicted by thermal expansion against the bulk modulus is much larger than the measured shifts in phonon energies. We conclude that the phonon anharmonicities associated with thermal expansion are largely canceled by effects from phonon-phonon scattering. Prior measurements of the heat capacity and calculations of the electronic entropy of vanadium are assessed, and consistency requires an explicit temperature dependence of the phonon DOS. Using data from the literature, similar results are found for chromium, niobium, titanium, and zirconium
- …