Interference coupling mechanisms in Silicon Strip Detectors - CMS tracker "wings": A learned lesson for SLHC

The identification of coupling mechanisms between noise sources and sensitive areas of the front-end electronics (FEE) in the previous CMS tracker sub-system is critical to optimize the design and integration of integrated circuits, sensors and power distribution circuitry for the proposed SLHC Silicon Strip Tracker systems. This paper presents a validated model of the noise sensitivity observed in the Silicon Strip Detector-FEE of the CMS tracker that allows quantifying both the impact of the noise coupling mechanisms and the system immunity against electromagnetic interferences. This model has been validated based on simulations using finite element models and immunity tests conducted on prototypes of the Silicon Tracker End-Caps (TEC) and Outer Barrel (TOB) systems. The results of these studies show important recommendations and criteria to be applied in the design of future detectors to increase the immunity against electromagnetic noise

DC-DC switching converter based power distribution vs serial power distribution: EMC strategies

This paper presents a detailed and comparative analysis from the electromagnetic compatibility point of view of the proposed power distributions for the SLHC tracker up-grade. The main idea is to identify and quantify the noise sources, noise distribution at the system level and the sensitive areas in the front-end electronics corresponding to both proposed topologies: The DC-DC converter based power distribution and the serial power distribution. These studies will be used to define critical points on both systems to be studied and prototyped to ensure the correct integration of the system taking critically into account the electromagnetic compatibility. This analysis at the system level is crucial to ensure the final performance of the detector using non conventional power distributions, avoiding interference problems and excessive losses that can lead to catastrophic failures or expensive and un-practical solutions

Global noise studies for CMS Tracker upgrade

7 páginas, 6 figuras.-- Trabajo presentado al "Topical Workshop on Electronics for Particle Physics 2010 (TWEPP-10)" celebrado en Alemania.-- Open Access.-- et al.The characterization of the noise emissions of DC-DC converters at system level is critical to optimize the design of the detector and define rules for the integration strategy. This paper presents the impedance effects on the noise emissions of DC-DC converters at system level. Conducted and radiated noise emissions at the input and at the output from DC-DC converters have been simulated for different types of power network and FEE impedances. System aspects as granularity, stray capacitances of the system and different working conditions of the DC-DC converters are presented too. This study has been carried out using simulation models of noise emissions of DC-DC converters in the real scenario. The results of these studies show important recommendations and criteria to be applied to integrate the DC-DC converters and decrease the system noise level.C.R. wants to thank to US DOE, under contract DE-AC02-76SF00515, for the support of this work.Peer reviewe

Studies of RF Noise Induced Bunch Lengthening at the LHC

Radio Frequency noise induced bunch lengthening can strongly affect the Large Hadron Collider performance through luminosity reduction, particle loss, and other effects. Models and theoretical formalisms demonstrating the dependence of the LHC longitudinal bunch length on the RF station noise spectral content have been presented*,**. Initial measurements validated these studies and determined the performance limiting RF components. For the existing LHC LLRF implementation the bunch length increases with a rate of 1 mm/hr, which is higher than the intrabeam scattering diffusion and leads to a 27% bunch length increase over a 20 hour store. This work presents measurements from the LHC that better quantify the relationship between the RF noise and longitudinal emittance blowup. Noise was injected at specific frequency bands and with varying amplitudes at the LHC accelerating cavities. The experiments presented in this paper confirmed the predicted effects on the LHC bunch length due to both the noise around the synchrotron frequency resonance and the noise in other frequency bands aliased down to the synchrotron frequency by the periodic beam sampling of the accelerating voltage

Lessons Learned from Positon-Electron Project Low Level RF and Longitudinal Feedback

The PEP-II B-Factory collider ended the final phase of operation at nearly twice the design current and 4X the design luminosity. To highlight the evolution from the original conceptual design through to the 1.2E34 final machine we choose one example each from the broadband feedback and from the LLRF system. They illustrate the original design estimation missed some very significant details, and how in the course of PEP-II operation unexpected difficulties led to significant insights and new approaches which allowed higher machine performance. We present valuable ”lessons learned” which are of interest to designers of next generation feedback and impedance controlled LLRF systems