Safety analysis in large volume vacuum systems like tokamak: Experiments and numerical simulation to analyze vacuum ruptures consequences

The large volume vacuum systems are used in many industrial operations and research laboratories. Accidents in these systems should have a relevant economical and safety impact. A loss of vacuum accident (LOVA) due to a failure of the main vacuum vessel can result in a fast pressurization of the vessel and consequent mobilization dispersion of hazardous internal material through the braches. It is clear that the influence of flow fields, consequence of accidents like LOVA, on dust resuspension is a key safety issue. In order to develop this analysis an experimental facility is been developed: STARDUST. This last facility has been used to improve the knowledge about LOVA to replicate a condition more similar to appropriate operative condition like to kamaks. By the experimental data the boundary conditions have been extrapolated to give the proper input for the 2D thermofluid-dynamics numerical simulations, developed by the commercial CFD numerical code. The benchmark of numerical simulation results with the experimental ones has been used to validate and tune the 2D thermofluid-dynamics numerical model that has been developed by the authors to replicate the LOVA conditions inside STARDUST. In present work, the facility, materials, numerical model, and relevant results will be presented. © 2014 A. Malizia et al

Study of 13CR-4NI-(MO) (F6NM) steel grade heat treatment for maximum hardness control in industrial heats

The standard NACE MR0175 (ISO 15156) requires a maximum hardness value of 23 HRC for 13Cr-4Ni-(Mo) steel grade for sour service, requiring a double tempering heat treatment at temperature in the range 648–691°C for the first tempering and 593–621°C for the second tempering. Difficulties in limiting alloy hardness after the tempering of forged mechanical components (F6NM) are often faced. Variables affecting the thermal behavior of 13Cr-4Ni-(Mo) during single and double tempering treatments have been studied by means of transmission electron microscopy (TEM) observations, X-ray diffraction measurements, dilatometry, and thermo-mechanical simulations. It has been found that relatively low Ac1 temperatures in this alloy induce the formation of austenite phase above 600°C during tempering, and that the formed, reverted austenite tends to be unstable upon cooling, thus contributing to the increase of final hardness via transformation to virgin martensite. Therefore, it is necessary to increase the Ac1 temperature as much as possible to allow the tempering of martensite at the temperature range required by NACE without the detrimental formation of virgin martensite upon final cooling. Attempts to do so have been carried out by reducing both carbon (<0.02% C) and nitrogen (<100 ppm) levels. Results obtained herein show final hardness below NACE limits without an unacceptable loss of mechanical strength

Laser pulse effects on plasma-sprayed and bulk tungsten

Tungsten (W) is considered a promising plasma-facing material for protecting the divertor of the ITER (International Thermonuclear Experimental Reactor). The effects on W of transient thermal loads of high energy occurring in a tokamak under operative conditions have been simulated through a single laser pulse delivered by an Nd:YAG laser. Bulk and plasma-sprayed (PS) samples have been submitted to tests and successively examined via SEM (scanning electron microscopy) observations. In both types of materials, the laser pulse induces similar effects: (i) a crater forms in the spot central area; (ii) all around the area, the ejection and the movement of molten metal give rise to a ridge; (iii) in a more external area, the surface shows plates with jagged boundaries and cracks induced by thermal stresses; (iv) the pores present in the original material become preferred ablation sites. However, the affected surface area in PS samples is larger and asymmetric if compared to that of bulk material. Such a difference has been explained by considering how microstructural characteristics influence heat propagation from the irradiated spot, and it was found that grain size and shape play a decisive role

Use of biological drugs in patients with psoriasis and psoriatic arthritis in italy: Results from the PSONG survey

This Italian multicenter retrospective study compared the drug survival and efficacy of differentanti-TNF agents in psoriasis (PsO) and psoriatic arthritis (PsA) patients. A database of PsO/PsApatients treated with adalimumab, etanercept, and infliximab from May 2013 to May 2014 wasanalyzed. PASI 75, 90, and 100 was calculated at each time point to evaluate efficacy. Drug sur-vival rate and probability of maintaining PASI response were evaluated. The impact of dependentvariables on probability of PASI 75 loss was evaluated by logistic regression. 1,235 patients wereincluded, 577 with PsO and 658 with PsA. Highest survival rates were observed with adalimumabfollowed by etanercept and infliximab in PsO and PsA patients. The probability of maintainingPASI response was significantly higher for adalimumab followed by infliximab. For PsO patients,the odds of losing PASI 75 was higher in etanercept-treated patients (OR: 8.1; 95% CI: 4.2–15.6,p<.001) or infliximab (OR: 6.6; 95% CI: 2.6–16.3,p<.001) vs. adalimumab. Likewise, for PsApatients the odds of losing PASI 75 was higher in etanercept-treated patients (OR: 2.3; 95% CI:1.4–3.8,p5.01) or infliximab (OR: 2.2; 95% CI: 1.1–4.1,p5.018) vs. adalimumab. Adalimumabcould be the best therapeutic option over other anti-TNF agents for the treatment of PsO and PsApatients

Detection of pollutant sources in the atmosphere with Lidar/Dial techniques: Results of an experimental campaign in the south of Italy

In the last years, surveying large regions of the atmosphere in an automatic way, for early detection of pollutant sources in urban and industrial areas, has become a strategic objective of various public health organizations. The Lidar/Dial technique has become a well-established laser remote sensing method for atmosphere monitoring. It is often used to probe almost any level of the atmosphere and to acquire information necessary to validate theoretical models about different topics of atmospheric physics. It can also be deployed for environment surveying by monitoring particles, aerosols and molecules. For these reasons, an experimental campaign for evaluating the performances of a Lidar/Dial system in detecting pollutants (particulate and/or chemical compounds) has been carried out in an industrial area in the south of Italy. In this work, a homemade Lidar/Dial system (developed and built by the authors) and the results of the experimental campaign will be presented and discussed. © 2014 AEIT

Spesolimab in patients with flare of generalized pustular psoriasis: A multicentre case-series

Dear Editor,Generalized pustular psoriasis (GPP) is a rare, potentially life-threatening, chronic inf lammatory disease character-ized by acute f lares of pustular eruptions that can be accom-panied by systemic inf lammation. GPP can be associated with chronic plaque psoriasi

Study of shock waves generation, hot electron production and role of parametric instabilities in an intensity regime relevant for the shock ignition

We present experimental results at intensities relevant to Shock Ignition obtained at the sub-ns Prague Asterix Laser System in 2012 . We studied shock waves produced by laser-matter interaction in presence of a pre-plasma. We used a first beam at 1ω (1315 nm) at 7 × 10 13 W/cm 2 to create a pre-plasma on the front side of the target and a second at 3ω (438 nm) at ∼ 10 16 W/cm 2 to create the shock wave. Multilayer targets composed of 25 (or 40 μm) of plastic (doped with Cl), 5 μm of Cu (for Kα diagnostics) and 20 μm of Al for shock measurement were used. We used X-ray spectroscopy of Cl to evaluate the plasma temperature, Kα imaging and spectroscopy to evaluate spatial and spectral properties of the fast electrons and a streak camera for shock breakout measurements. Parametric instabilities (Stimulated Raman Scattering, Stimulated Brillouin Scattering and Two Plasmon Decay) were studied by collecting the back scattered light and analysing its spectrum. Back scattered energy was measured with calorimeters. To evaluate the maximum pressure reached in our experiment we performed hydro simulations with CHIC and DUED codes. The maximum shock pressure generated in our experiment at the front side of the target during laser-interaction is 90 Mbar. The conversion efficiency into hot electrons was estimated to be of the order of ∼ 0.1% and their mean energy in the order ∼50 keV. Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distributio