Self-organized synchronization of mechanically coupled resonators based on optomechanics gain-loss balance

We investigate collective nonlinear dynamics in a blue-detuned optomechanical cavity that is mechanically coupled to an undriven mechanical resonator. By controlling the strength of the driving field, we engineer a mechanical gain that balances the losses of the undriven resonator. This gain-loss balance corresponds to the threshold where both coupled mechanical resonators enter simultaneously into self-sustained limit cycle oscillations regime. Rich sets of collective dynamics such as in-phase and out-of-phase synchronizations therefore emerge, depending on the mechanical coupling rate, the optically induced mechanical gain and spring effect, and the frequency mismatch between the resonators. Moreover, we introduce the quadratic coupling that induces enhancement of the in-phase synchronization. This work shows how phonon transport can remotely induce synchronization in coupled mechanical resonator array and opens up new avenues for metrology, communication, phonon-processing, and novel memories concepts.Comment: Comments are welcome

Real-Time Imaging of K atoms on Graphite: Interactions and Diffusion

Scanning tunneling microscopy (STM) at liquid helium temperature is used to image potassium adsorbed on graphite at low coverage (~0.02 monolayer). Single atoms appear as protrusions on STM topographs. A statistical analysis of the position of the atoms demonstrates repulsion between adsorbates, which is quantified by comparison with molecular dynamics simulations. This gives access to the dipole moment of a single adsorbate, found to be 10.5 Debye. Time lapse imaging shows that long range order is broken by thermally activated diffusion, with a 32 meV barrier to hopping between graphite lattice sites

Band gap engineering in simultaneous phononic and photonic crystal slabs

We discuss the simultaneous existence of phononic and photonic band gaps in two types of phononic crystals slabs, namely periodic arrays of nanoholes in a Si membrane and of Si nanodots on a SiO2 membrane. In the former geometry, we investigate in detail both the boron nitride lattice and the square lattice with two atoms per unit cell (these include the square, triangular and honeycomb lattices as particular cases). In the latter geometry, some preliminary results are reported for a square lattice

Cleaving-temperature dependence of layered-oxide surfaces

The surfaces generated by cleaving non-polar, two-dimensional oxides are often considered to be perfect or ideal. However, single particle spectroscopies on Sr2RuO4, an archetypal non-polar two dimensional oxide, show significant cleavage temperature dependence. We demonstrate that this is not a consequence of the intrinsic characteristics of the surface: lattice parameters and symmetries, step heights, atom positions, or density of states. Instead, we find a marked increase in the density of defects at the mesoscopic scale with increased cleave temperature. The potential generality of these defects to oxide surfaces may have broad consequences to interfacial control and the interpretation of surface sensitive measurements

Scanning tunneling spectroscopy of superconducting LiFeAs single crystals: Evidence for two nodeless energy gaps and coupling to a bosonic mode

The superconducting compound, LiFeAs, is studied by scanning tunneling microscopy and spectroscopy. A gap map of the unreconstructed surface indicates a high degree of homogeneity in this system. Spectra at 2 K show two nodeless superconducting gaps with $\Delta_1=5.3\pm0.1$ meV and $\Delta_2=2.5\pm0.2$ meV. The gaps close as the temperature is increased to the bulk $T_c$ indicating that the surface accurately represents the bulk. A dip-hump structure is observed below $T_c$ with an energy scale consistent with a magnetic resonance recently reported by inelastic neutron scattering

Parametrically enhancing sensor sensitivity at an exceptional point

We propose a scheme to enhance the sensitivity of Non-Hermitian optomechanical mass-sensors. The benchmark system consists of two coupled optomechanical systems where the mechanical resonators are mechanically coupled. The optical cavities are driven either by a blue or red detuned laser to produce gain and loss, respectively. Moreover, the mechanical resonators are parametrically driven through the modulation of their spring constant. For a specific strength of the optical driving field and without parametric driving, the system features an Exceptional Point (EP). Any perturbation to the mechanical frequency (dissipation) induces a splitting (shifting) of the EP, which scales as the square root of the perturbation strength, resulting in a sensitivity-factor enhancement compared with conventional optomechanical sensors. The sensitivity enhancement induced by the shifting scenario is weak as compared to the one based on the splitting phenomenon. By switching on parametric driving, the sensitivity of both sensing schemes is greatly improved, yielding to a better performance of the sensor. We have also confirmed these results through an analysis of the output spectra and the transmissions of the optical cavities. In addition to enhancing EP sensitivity, our scheme also reveals nonlinear effects on sensing under splitting and shifting scenarii. This work sheds light on new mechanisms of enhancing the sensitivity of Non-Hermitian mass sensors, paving a way to improve sensors performance for better nanoparticles or pollutants detection, and for water treatment.Comment: 12 pages, 5 figures. Comments are welcom

Design of a thin-plate based tunable high-quality narrow passband filter for elastic transverse waves propagate in metals

For the elastic SV (transverse) waves in metals, a high-quality narrow passband filter that consists of aligned parallel thin plates with small gaps is designed. In order to obtain a good performance, the thin plates should be constituted by materials with a smaller mass density and Young’s modulus, such as polymethylmethacrylate (PMMA), compared to the embedded materials in which the elastic SV waves propagate. Both the theoretical model and the full numerical simulation show that the transmission spectrum of the designed filter demonstrates several peaks with flawless transmission within 0 KHz ∼20 KHz frequency range. The peaks can be readily tuned by manipulating the geometrical parameters of the plates. Therefore, the current design works well for both low and high frequencies with a controllable size. Even for low frequencies on the order of kilohertz, the size of this filter can be still limited to the order of centimeters, which significantly benefits the real applications. The investigation also finds that the same filter is valid when using different metals and the reason behind this is explained theoretically. Additionally, the effect of bonding conditions of interfaces between thin plates and the base material is investigated using a spring model