2,990 research outputs found
Analysis of counting errors in the phase/Doppler particle analyzer
NASA is investigating the application of the Phase Doppler measurement technique to provide improved drop sizing and liquid water content measurements in icing research. The magnitude of counting errors were analyzed because these errors contribute to inaccurate liquid water content measurements. The Phase Doppler Particle Analyzer counting errors due to data transfer losses and coincidence losses were analyzed for data input rates from 10 samples/sec to 70,000 samples/sec. Coincidence losses were calculated by determining the Poisson probability of having more than one event occurring during the droplet signal time. The magnitude of the coincidence loss can be determined, and for less than a 15 percent loss, corrections can be made. The data transfer losses were estimated for representative data transfer rates. With direct memory access enabled, data transfer losses are less than 5 percent for input rates below 2000 samples/sec. With direct memory access disabled losses exceeded 20 percent at a rate of 50 samples/sec preventing accurate number density or mass flux measurements. The data transfer losses of a new signal processor were analyzed and found to be less than 1 percent for rates under 65,000 samples/sec
Comparison of drop size distributions from two droplet sizing systems
A comparison between the Phase Doppler Particle Analyzer and the combined measurements from Particle Measuring Systems' Forward Scattering Spectrometer Probe and the Optical Array Probe was conducted in an icing wind tunnel using NASA Icing Research Tunnel spray nozzles to produce the supercooled water droplet cloud. Clouds having a range of volume median diameters from 10 to greater than 50 microns were used for the instrument comparisons. A volume median diameter was calculated from combining the droplet distributions of the Optical Array Probe and the Forward Scattering Spectrometer Probe. A comparison of the combined volume median diameters and the Phase Doppler Particle Analyzer volume median diameters showed agreement from 10 microns up to 30 microns. Typical drop size distributions from the Phase Doppler Particle Analyzer, the Forward Scattering Spectrometer Probe, and Optical Array Probe are presented for several median volume diameters. A comparison of the distributions illustrates regions of the distributions where there is good agreement and other regions where there are discrepancies between the Phase Doppler Particle Analyzer and the Particle Measuring Systems' droplet size instruments
Experimental testing of four correction algorithms for the forward scattering spectrometer probe
Three number density correction algorithms and one size distribution correction algorithm for the Forward Scattering Spectrometer Probe (FSSP) were compared with data taken by the Phase Doppler Particle Analyzer (PDPA) and an optical number density measuring instrument (NDMI). Of the three number density correction algorithms, the one that compared best to the PDPA and NDMI data was the algorithm developed by Baumgardner, Strapp, and Dye (1985). The algorithm that corrects sizing errors in the FSSP that was developed by Lock and Hovenac (1989) was shown to be within 25 percent of the Phase Doppler measurements at number densities as high as 3000/cc
An Experimental Overview of Results Presented at SQM 2006
I have been asked to give an critical overview on the experimental results
shown in the conference with a emphasis of what has been learned and the
challenges that are ahead in trying to understand the physics of the strongly
interacting quark-gluon plasma. I will not try to summarize all of the results
presented, rather I will concentrate primarily on RHIC data from this
conference. Throughout this summary, I will periodically review some of the
previous results for those not familiar with the present state of the field.Comment: 15 pages, 12 Figure
Lost in translation: overcoming the barriers to global implementation and exchange of behavioral medicine evidence
EthniCity of leisure : a domains approach to ethnic integration during free time activities
The research leading to these results has received funding from the Estonian Research Council (Institutional Research Grant IUT2-17 on Spatial Population Mobility and Geographical Changes in Urban Regions); the Estonian Science Foundation (Grant No. 8774 and 9247); and the European Research Council under the European Union’s Seventh Framework Programme (FP/2007-2013)/ERC [Grant Agreement No. 615159] (ERC Consolidator Grant DEPRIVEDHOODS, Socio-spatial inequality, deprived neighbourhoods, and neighbourhood effects); and from the Marie Curie programme under the European Union’s Seventh Framework Programme (FP/2007-2013)/Career Integration [Grant No. PCIG10-GA-2011-303728] (CIG Grant NBHCHOICE, Neighbourhood choice, neighbourhood sorting, and neighbourhood effects)This paper investigates the most common leisure time activities, activity sites and the interaction between members of minority and majority populations as they spend their time out-of-home and out-of-workplace. We ask the question how leisure time activities are related to the ethnic dimensions of residential and workplaces. Our case study area is Tallinn, Estonia, and the main findings show that leisure time activity patterns have become very similar across the main ethnic groups, which is different from what is found for workplace and residential segregation. This shows the integrative potential of leisure time activities. However, since members of the minority and majority population still tend to visit different leisure sites, there is little interaction. We also find that people often spend their free time close to home, which implies that high levels of ethnic residential segregation translate into ethnic segregation during leisure time.Publisher PDFPeer reviewe
A preliminary study on ice shape tracing with a laser light sheet
Preliminary work towards the development of an automated method of measuring the shape of ice forming on an airfoil during wind tunnel tests has been completed. A thin sheet of light illuminated the front surfaces of rime, glaze, and mixed ice shapes and a solid-state camera recorded images of each. A maximum intensity algorithm extracted the profiles of the ice shapes and the results were compared to hand tracings. Very good general agreement was found in each case
- …