70 research outputs found
Randomized ancillary qubit overcomes detector-control and intercept-resend hacking of quantum key distribution
Practical implementations of quantum key distribution (QKD) have been shown
to be subject to various detector side-channel attacks that compromise the
promised unconditional security. Most notable is a general class of attacks
adopting the use of faked-state photons as in the detector-control and, more
broadly, the intercept-resend attacks. In this paper, we present a simple
scheme to overcome such class of attacks: A legitimate user, Bob, uses a
polarization randomizer at his gateway to distort an ancillary polarization of
a phase-encoded photon in a bidirectional QKD configuration. Passing through
the randomizer once on the way to his partner, Alice, and again in the opposite
direction, the polarization qubit of the genuine photon is immune to
randomization. However, the polarization state of a photon from an intruder,
Eve, to Bob is randomized and hence directed to a detector in a different path,
whereupon it triggers an alert. We demonstrate theoretically and experimentally
that, using commercial off-the-shelf detectors, it can be made impossible for
Eve to avoid triggering the alert, no matter what faked-state of light she
uses.Comment: Quantum encryption, bidirectional quantum key distribution, detector
control, intercept and resend attacks, faked state photon
Recent Trends in Plasmonic Nanowire Solar Cells
Light trapping is crucial for low-cost and highly efficient nanowire (NW) solar cells (SCs). In order to increase the light absorption through the NWSCs, plasmonic materials can be incorporated inside or above the NW design. In this regard, two novel designs of plasmonic NWSCs are reported and analyzed using 3D finite difference time domain method. The geometrical parameters of the reported designs are studied to improve their electrical and optical efficiencies. The ultimate and power conversion efficiencies (PCE) are used to quantify the conversion efficiency of the light into electricity. The first design relies on funnel shaped SiNWs with plasmonic core while the cylindrical NWs of the second design are decorated by Ag diamond shaped. The calculated ultimate efficiency and PCE of the plasmonic funnel design are equal to 44% and 18.9%, respectively with an enhancement of 43.3 % over its cylindrical NWs counterpart. This enhancement can be explained by the coupling between the three optical modes, supported by the upper cylinder, lower cone and plasmonic material. Moreover, the cylindrical SiNWs decorated by Ag diamond offer an ultimate efficiency and short-circuit current density of 25.7%, and 21.03 mA∕cm2, respectively with an improvement of 63% over the conventional cylindrical SiNWs
Light absorption enhancement in thin film hydrgenated amorphus Si solar cells
In this paper, light absorption enhancement in thin film solar cell (SC) is reported and analyzed. The suggested design is based on a nanostructured pattern that increases the diffuse scattered component of radiation and hence the absorption through the active layer. An ion beam sputtering (lBS) approach is used to texture large areas of the glass substrate with high aspect-ratio ripples in order to increase light scattering. Then, thin film SC supported on the textured glass is simulated and analyzed using 3D finite difference time domain (FDTD) method. The suggested SC can offer an ultimate efficiency of 19.26% with short circuit current of 15.76 mA/cm2 with an enhancement of 31.435% over the SC without texturing surface
Recommended from our members
Optical and electrical characterization of solar cell with nanowires mimicking antireflection coating layers considering axial and radial PN junctions
It has been well documented that the usage of a textured cover layer reduces reflection from the air‐solar cell interface, which ultimately enhances the power conversion efficiency (PCE) of a solar cell. The most commonly used patterns, such as pyramids, micropillars, nanowires (NW), and nanoholes have been widely studied and optimized. Besides using such NWs to enhance light absorption, this work also additionally considers the concept of mimicking the antireflection coating of single or multiple layers in minimizing the reflectance and thus enhancing the total absorptance further. It is shown here that at least one order of magnitude shorter multilayer NW pattern of 268 nm total height can outperform a standard NW of 4270 nm height, which needs less material and can also be fabricated at a reduced cost. Furthermore, the proposed design with reduced height has a significantly lower surface‐to‐volume ratio, which also reduces surface recombination loss than the other textured surface patterns. The results presented in this work have been comprehensively analyzed by initially optimizing optical absorption and then completing the electrical simulations. The optimized design in conjunction with a back reflector offers an efficiency as high as 16.434%
Recommended from our members
Characteristics of silicon nanowire solar cells with a crescent nanohole
In recent years, newly emerging photovoltaic (PV) devices based on silicon nanowire solar cells (SiNW-SCs) have attracted considerable research attention. This is due to their efficient light-trapping capability and large carrier transportation and collection with compact size. However, there is a strong desire to find effective strategies to provide high and wideband optical absorption. In this paper, a modified circular nanowire (NW) with a nanocrescent hole is newly introduced and analyzed for solar cell applications. The crescent hole can strongly improve the light absorption through the NW due to the excitation of numbers of modes that can be coupled with the incident light. The material index, volume, and position of the nanohole are studied to significantly increase the optical absorption efficiency and hence the power conversion efficiency (PCE). The absorption performance can be further preserved by using a silicon substrate due to the coupling between the supported modes by the NW, and that of the substrate. The optical and electrical characteristics of the suggested design are investigated using finite difference time domain and finite element methods via Lumerical software packages. The reported asymmetric design offers higher optical and electrical efficiencies compared to the conventional NW counterpart. The proposed NW offers a short circuit current density (Jsc) of 33.85 (34.35) mA/cm2 and power conversion efficiency (PCE) of 16.78 (17.05) % with an enhancement of 16.3 (16.8) % and 17.3 (18.4) % for transverse magnetic (TM) and transverse electric (TE) polarizations, respectively, compared to the conventional cylindrical counterpart
Electrical performance of efficient quad-crescent-shaped Si nanowire solar cell
The electrical characteristics of quad-crescent-shaped silicon nanowire (NW) solar cells (SCs) are numerically analyzed and as a result their performance optimized. The structure discussed consists of four crescents, forming a cavity that permits multiple light scattering with high trapping between the NWs. Additionally, new modes strongly coupled to the incident light are generated along the NWs. As a result, the optical absorption has been increased over a large portion of light wavelengths and hence the power conversion efficiency (PCE) has been improved. The electron–hole (e–h) generation rate in the design reported has been calculated using the 3D finite difference time domain method. Further, the electrical performance of the SC reported has been investigated through the finite element method, using the Lumerical charge software package. In this investigation, the axial and core–shell junctions were analyzed looking at the reported crescent and, as well, conventional NW designs. Additionally, the doping concentration and NW-junction position were studied in this design proposed, as well as the carrier-recombination-and-lifetime effects. This study has revealed that the high back surface field layer used improves the conversion efficiency by ∼ 80%. Moreover, conserving the NW radial shell as a low thickness layer can efficiently reduce the NW sidewall recombination effect. The PCE and short circuit current were determined to be equal to 18.5% and 33.8 mA/cm for the axial junction proposed. However, the core–shell junction shows figures of 19% and 34.9 mA/cm. The suggested crescent design offers an enhancement of 23% compared to the conventional NW, for both junctions. For a practical surface recombination velocity of 10 cm/s, the PCE of the proposed design, in the axial junction, has been reduced to 16.6%, with a reduction of 11%. However, the core–shell junction achieves PCE of 18.7%, with a slight reduction of 1.6%. Therefore, the optoelectronic performance of the core–shell junction was marginally affected by the NW surface recombination, compared to the axial junction
Accelerating biomedical image segmentation using equilibrium optimization with a deep learning approach
Biomedical image segmentation is a vital task in the analysis of medical imaging, including the detection and delineation of pathological regions or anatomical structures within medical images. It has played a pivotal role in a variety of medical applications, involving diagnoses, monitoring of diseases, and treatment planning. Conventionally, clinicians or expert radiologists have manually conducted biomedical image segmentation, which is prone to human error, subjective, and time-consuming. With the advancement in computer vision and deep learning (DL) algorithms, automated and semi-automated segmentation techniques have attracted much research interest. DL approaches, particularly convolutional neural networks (CNN), have revolutionized biomedical image segmentation. With this motivation, we developed a novel equilibrium optimization algorithm with a deep learning-based biomedical image segmentation (EOADL-BIS) technique. The purpose of the EOADL-BIS technique is to integrate EOA with the Faster RCNN model for an accurate and efficient biomedical image segmentation process. To accomplish this, the EOADL-BIS technique involves Faster R-CNN architecture with ResNeXt as a backbone network for image segmentation. The region proposal network (RPN) proficiently creates a collection of a set of region proposals, which are then fed into the ResNeXt for classification and precise localization. During the training process of the Faster RCNN algorithm, the EOA was utilized to optimize the hyperparameter of the ResNeXt model which increased the segmentation results and reduced the loss function. The experimental outcome of the EOADL-BIS algorithm was tested on distinct benchmark medical image databases. The experimental results stated the greater efficiency of the EOADL-BIS algorithm compared to other DL-based segmentation approaches
Recommended from our members
Electrical performance of efficient quad-crescent-shaped Si nanowire solar cell
The electrical characteristics of quad-crescent-shaped silicon nanowire (NW) solar cells (SCs) are numerically analyzed and as a result their performance optimized. The structure discussed consists of four crescents, forming a cavity that permits multiple light scattering with high trapping between the NWs. Additionally, new modes strongly coupled to the incident light are generated along the NWs. As a result, the optical absorption has been increased over a large portion of light wavelengths and hence the power conversion efficiency (PCE) has been improved. The electron–hole (e–h) generation rate in the design reported has been calculated using the 3D finite difference time domain method. Further, the electrical performance of the SC reported has been investigated through the finite element method, using the Lumerical charge software package. In this investigation, the axial and core–shell junctions were analyzed looking at the reported crescent and, as well, conventional NW designs. Additionally, the doping concentration and NW-junction position were studied in this design proposed, as well as the carrier-recombination-and-lifetime effects. This study has revealed that the high back surface field layer used improves the conversion efficiency by ∼ 80%. Moreover, conserving the NW radial shell as a low thickness layer can efficiently reduce the NW sidewall recombination effect. The PCE and short circuit current were determined to be equal to 18.5% and 33.8 mA/ cm 2 for the axial junction proposed. However, the core–shell junction shows figures of 19% and 34.9 mA/ cm 2. The suggested crescent design offers an enhancement of 23% compared to the conventional NW, for both junctions. For a practical surface recombination velocity of 10 2 cm/s, the PCE of the proposed design, in the axial junction, has been reduced to 16.6%, with a reduction of 11%. However, the core–shell junction achieves PCE of 18.7%, with a slight reduction of 1.6%. Therefore, the optoelectronic performance of the core–shell junction was marginally affected by the NW surface recombination, compared to the axial junction
- …