96 research outputs found
Kemijski sastav endemske biljke Centaurea austro-anatolica i ispitivanje antimikrobnog djelovanja protiv multi-rezistentnih bakterija
Hexane, chloroform, ethyl acetate and ethanolic extracts of the aerial parts of C. austro-anatolica Hub.-Mor. (Asteraceae) were evaluated against microorganisms, including multi-resistant bacteria, using a paper disc diffusion method. The chloroform extract exhibited significant antibacterial activity toward all bacteria tested. The chemical composition of the chloroform extract was determined by gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS). The major compounds of the extract were caryophyllene oxide (21.32 %), spathulenol (10.86 %), n-tricosanol (9.58 %) and geranyl isovalerate (8.71 %).Heksanski, kloroformski, etil-acetatni i etanolni ekstrakti vršnih dijelova biljke C. austro-anatolica Hub.-Mor. (Asteraceae) ispitivani su na antimikrobno djelovanje protiv multi-rezistentnih bakterija, koristeći difuzijsku metodu na papirnom disku. Kloroformski ekstrakt pokazao je značajno antibakterijsko djelovanje protiv svih testiranih bakterija. Kemijski sastav tog ekstrakta određivan je plinskom kromatografijom (GC) i plinskom kromatografijom-spektrometrijom masa (GC-MS). Najvažniji sastojci ekstrakta bili su kariofilen oksid (21,32 %), spatulenol (10,86 %), n-trikozanol (9,58 %) i geranil izovalerat (8,71 %)
Optimization of PCR conditions to amplify microsatellite loci in the bunchgrass lizard (Sceloporus slevini) genomic DNA
<p>Abstract</p> <p>Background</p> <p>Microsatellites, also called Simple Sequence Repeats (SSRs), repetitions of nucleotide motifs of 1-5 bases, are currently the markers of choice due to their abundant distribution in the genomes, and suitability for high-throughput analysis. A total of five different primer pairs were optimized for polymerase chain reaction (PCR) to amplify microsatellite loci in total genomic DNA of bunchgrass lizards (<it>Sceloporus slevini</it>) collected from three sites in southeastern Arizona; the Sonoita Plain, Chiricahua Mountains and Huachuca Mountains.</p> <p>Findings</p> <p>The primers used for current investigation were originally designed for the Eastern Fence Lizard (<it>Sceloporus undulatus</it>). Five primer pairs were selected based on annealing temperatures for optimizing the PCR conditions to amplify with bunchgrass lizards. Different concentrations of DNA and annealing temperature were optimized. While keeping other reagents constant, a DNA concentration, 37.5 ng in the final reaction volume and PCR conditions of an initial denaturation of 94°C for five minutes, an annealing temperature of 55°C and final extension of 72°C for four minutes gave the best amplification for all the primer pairs.</p> <p>Conclusions</p> <p>Modifying the standard protocol for annealing temperatures and final extension time increases the success of cross amplification of specific microsatellite loci in the bunchgrass lizard. A loading volume of 5 ul DNA at a concentration of 10 ng/ul and a 2% agarose for gel electrophoresis were observed the best for cross amplification of selected five primer pairs on bunch grass lizard.</p> <p>Trial Registration</p> <p>The research was conducted with Arizona Game and Fish Department scientific collecting permits SP565256, SP657407 & SP749119 to Dr. Christian A d'Orgeix.</p
Botulinum toxin injection versus lateral internal sphincterotomy in the treatment of chronic anal fissure: a non-randomized controlled trial
BACKGROUND: Although lateral internal sphincterotomy is the gold-standard treatment for chronic anal fissure, intrasphincteric injection of botulinum toxin seems to be a reliable new option. The aim of this non-randomized study is to compare the effect of lateral internal sphincterotomy and botulinum toxin injection treatments on the outcome and reduction of anal sphincter pressures in patients with chronic anal fissure. METHODS: Patients with chronic anal fissure were treated with either botulinum toxin injection or lateral internal sphincterotomy by their own choice. Maximal resting pressure and maximal squeeze pressure measurements were performed before and 2 weeks after treatments by anal manometry. Patients were followed for fissure relapse during 14 months. RESULTS: Twenty-one consecutive outpatients with posterior chronic anal fissure were enrolled. Eleven patients underwent surgery and ten patients received botulinum toxin injection treatment. Before the treatment, anal pressures were found to be similar in both groups. After the treatment, the maximal resting pressures were reduced from 104 ± 22 mmHg to 86 ± 15 mmHg in the surgery group (p < 0.05) and from 101 ± 23 mmHg to 83 ± 24 mmHg in the botulinum toxin group (p < 0.05). The mean maximal squeeze pressures were reduced from 70 ± 27 mmHg to 61 ± 32 mmHg (p > 0.05) in the surgery group, and from 117 ± 62 mmHg to 76 ± 34 (p < 0.01) in the botulinum toxin group. The fissures were healed in 70 percent of patients in the botulinum group and 82 percent in the surgery group (p > 0.05). There were no relapses during the 14 months of follow up. CONCLUSION: Lateral internal sphincterotomy and botulinum toxin injection treatments both seem to be equally effective in the treatment of chronic anal fissure
Time course of collagen peak in bile duct-ligated rats
<p>Abstract</p> <p>Background</p> <p>One of the most useful experimental fibrogenesis models is the "bile duct-ligated rats". Our aim was to investigate the quantitative hepatic collagen content by two different methods during the different stages of hepatic fibrosis in bile duct-ligated rats on a weekly basis. We questioned whether the 1-wk or 4-wk bile duct-ligated model is suitable in animal fibrogenesis trials.</p> <p>Methods</p> <p>Of the 53 male Wistar rats, 8 (Group 0) were used as a healthy control group. Bile duct ligation (BDL) had been performed in the rest. Bile duct-ligated rates were sacrificed 7 days later in group 1 (10 rats), 14 days later in group 2 (9 rats), 21 days later in group 3(9 rats) and 28 days later in group 4 (9 rats). Eight rats underwent sham-operation (Sham). Hepatic collagen measurements as well as serum levels of liver enzymes and function tests were all analysed.</p> <p>Results</p> <p>The peak level of collagen was observed biochemically and histomorphometricly at the end of third week (P < 0.001 and P < 0.05). Suprisingly, collagen levels had decreased with the course of time such as at the end of fourth week (P < 0.01 and P < 0.05).</p> <p>Conclusion</p> <p>We have shown that fibrosis in bile duct-ligated rats is transient, i.e. reverses spontaneously after 3 weeks. This contrasts any situation in patients where hepatic fibrosis is progressive and irreversible as countless studies performed by many investigators in the same animal model.</p
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons
The Compact Muon Solenoid Collaboration is designing a new high-granularity
endcap calorimeter, HGCAL, to be installed later this decade. As part of this
development work, a prototype system was built, with an electromagnetic section
consisting of 14 double-sided structures, providing 28 sampling layers. Each
sampling layer has an hexagonal module, where a multipad large-area silicon
sensor is glued between an electronics circuit board and a metal baseplate. The
sensor pads of approximately 1 cm are wire-bonded to the circuit board and
are readout by custom integrated circuits. The prototype was extensively tested
with beams at CERN's Super Proton Synchrotron in 2018. Based on the data
collected with beams of positrons, with energies ranging from 20 to 300 GeV,
measurements of the energy resolution and linearity, the position and angular
resolutions, and the shower shapes are presented and compared to a detailed
Geant4 simulation
Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20300 GeV/c
The upgrade of the CMS experiment for the high luminosity operation of the
LHC comprises the replacement of the current endcap calorimeter by a high
granularity sampling calorimeter (HGCAL). The electromagnetic section of the
HGCAL is based on silicon sensors interspersed between lead and copper (or
copper tungsten) absorbers. The hadronic section uses layers of stainless steel
as an absorbing medium and silicon sensors as an active medium in the regions
of high radiation exposure, and scintillator tiles directly readout by silicon
photomultipliers in the remaining regions. As part of the development of the
detector and its readout electronic components, a section of a silicon-based
HGCAL prototype detector along with a section of the CALICE AHCAL prototype was
exposed to muons, electrons and charged pions in beam test experiments at the
H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology
as foreseen for the HGCAL but with much finer longitudinal segmentation. The
performance of the calorimeters in terms of energy response and resolution,
longitudinal and transverse shower profiles is studied using negatively charged
pions, and is compared to GEANT4 predictions. This is the first report
summarizing results of hadronic showers measured by the HGCAL prototype using
beam test data.Comment: To be submitted to JINS
Recommended from our members
Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study
Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat
- …