99 research outputs found
Microhardness changes gradient of the duplex stainless steel (DSS) surface layer after dry turning
The article presents the gradient of microhardness changes as a function of the distance from the material surface after turning with a wedge provided with a coating with a ceramic intermediate layer. The investigation comprised the influence of cutting speed on surface integrity microhardness in dry machining. The tested material was duplex stainless steel (DSS) with two-phase, ferritic-austenitic structure. The tests have been performed under production conditions during machining of parts for electric motors and deep-well pumps
Investigation of the physical parameters of duplex stainless steel (DSS) surface integrity after turning
The article presents the influence of machining parameters on the microhardness of surface integrity (SI) after turning by means of a coated sintered carbide wedge with a coating with ceramic intermediate layer. The investigation comprised the influence of cutting speed on the SI microhardness in dry machining. The material under investigation was duplex stainless steel with two-phase ferritic-austenitic structure. The results obtained allow for conclusions concerning the exploitation features of processed machine parts
Investigation of selected surface integrity features of duplex stainless steel (DSS) after turning
The article presents surface roughness profiles and Abbott - Firestone curves with vertical and amplitude parameters of surface roughness after turning by means of a coated sintered carbide wedge with a coating with ceramic intermediate layer. The investigation comprised the influence of cutting speed on the selected features of surface integrity in dry machining. The material under investigation was duplex stainless steel with two-phase ferritic-austenitic structure. The tests have been performed under production conditions during machining of parts for electric motors and deep-well pumps. The obtained results allow to draw conclusions about the characteristics of surface properties of the machined parts
Optimisation of machining parameters during ball end milling of hardened steel with various surface inclinations
This paper proposes a method for the reduction of forces and the improvement of efficiency during finish ball end milling of hardened 55NiCrMoV6 steel. The primary objective of this work concentrates on the optimal selection of milling parameters (cutting speed â vc, surface inclination angle α), which enables the simultaneous minimisation of cutting force values and increased process efficiency. The research includes the measurement of cutting forces (Fx, Fy, Fz) during milling tests with variable input parameters and calculation of process efficiency accounting for cutting parameters and surface inclination. The paper then focuses on the multi-criteria optimisation of the ball end milling process in terms of cutting forces and efficiency. This procedure is carried out with the application of the response surface method, based on the minimisation of a total utility function. The work shows that surface inclination angle has a significant influence on the cutting force values. Minimal cutting forces and relative high efficiency can be achieved with cutting speed vc = 375 m/min and surface inclination angle α = 15°
Influence of argon pollution on the weld surface morphology
In this paper the surfaces of butt welded joints in steel tubes were analyzed using an optical
3D measurement system to determine the morphology and topographic parameters. It
was established that pollution of the argon shield gas with oxygen did not influence the
width of the heat-affected zone. However, the composition of the shield gas significantly
influenced the surface asymmetry, Ssk, and its inclination Sku. The measurement of these
parameters enabled the selection of a higher quality surface, which was visually proven
by the reduction in discoloration of the surface of the weld joint. High quality surfaces
eliminate a potential habitat for bacteria and a future source of corrosion as well as providing
less resistance to fluid flow
First Directional Measurement of sub-MeV Solar Neutrinos with Borexino
We report the measurement of sub-MeV solar neutrinos through the use of their associated Cherenkov radiation, performed with the Borexino detector at the Laboratori Nazionali del Gran Sasso. The measurement is achieved using a novel technique that correlates individual photon hits of events to the known position of the Sun. In an energy window between 0.54 to 0.74 MeV, selected using the
dominant scintillation light, we have measured 10 887ĂŸ2386 Ă°statĂ ïżœ 947Ă°systĂ (68% confidence interval) â2103 solar neutrinos out of 19904 total events. This corresponds to a 7Be neutrino interaction rate of 51.6ĂŸ13.9 counts=Ă°day · 100 tonĂ, which is in agreement with the standard solar model predictions and the â12.5 previous spectroscopic results of Borexino. The no-neutrino hypothesis can be excluded with > 5Ï confidence level. For the first time, we have demonstrated the possibility of utilizing the directional Cherenkov information for sub-MeV solar neutrinos, in a large-scale, high light yield liquid scintillator detector. This measurement provides an experimental proof of principle for future hybrid event reconstruction using both Cherenkov and scintillation signatures simultaneously
Experimental Detection of the CNO Cycle
Borexino recently reported the first experimental evidence for a CNO neutrino. Since this process accounts for only about 1% of the Sunâs total energy production, the associated neutrino flux is remarkably low compared to that of the pp chain, the dominant hydrogen-burning process. This experimental evidence for the existence of CNO neutrinos was obtained using a highly radio-pure Borexino liquid scintillator. Improvements in the thermal stabilization of the detector over the last five years have allowed us to exploit a method of constraining the rate of 210Bi background. Since the CNO cycle is dominant in massive stars, this result is the first experimental evidence of a major stellar hydrogen-to-helium conversion mechanism in the Universe
Solar and geoneutrinos
Thanks to the progress of neutrino physics, today we are able of exploiting neutrinos as a tool to study astrophysical objects. The latter in turn serve as unique sources of elusive neutrinos, which fundamental properties are still to be understood. This contribution attempts to summarize the latest results obtained by measuring neutrinos emitted from the Sun and geoneutrinos produced in radioactive decays inside the Earth, with a particular focus on a recent discovery of the CNO-cycle solar neutrinos by Borexino. Comprehensive measurement of the pp-chain solar neutrinos and the first directional detection of sub-MeV solar neutrinos by Borexino, the updated 8B solar neutrino results of Super-Kamiokande, as well as the latest Borexino and KamLAND geoneutrino measurements are also discussed
Identification of the cosmogenic 11C background in large volumes of liquid scintillators with Borexino
Cosmogenic radio-nuclei are an important source of background for low-energy neutrino experiments. In Borexino, cosmogenic 11C decays outnumber solar pep and CNO neutrino events by about ten to one. In order to extract the flux of these two neutrino species, a highly efficient identification of this background is mandatory. We present here the details of the most consolidated strategy, used throughout Borexino solar neutrino measurements. It hinges upon finding the space-time correlations between 11C decays, the preceding parent muons and the accompanying neutrons. This article describes the working principles and evaluates the performance of this Three-Fold Coincidence (TFC) technique in its two current implementations: a hard-cut and a likelihood-based approach. Both show stable performances throughout Borexino Phases II (2012â2016) and III (2016â2020) data sets, with a 11C tagging efficiency of âŒ90 % and ⌠63â66 % of the exposure surviving the tagging. We present also a novel technique that targets specifically 11C produced in high-multiplicity during major spallation events. Such 11C appear as a burst of events, whose space-time correlation can be exploited. Burst identification can be combined with the TFC to obtain about the same tagging efficiency of âŒ90% but with a higher fraction of the exposure surviving, in the range of ⌠66â68 %
- âŠ