838 research outputs found
Statistics of the seasonal cycle of the 1951-2000 surface temperature records in Italy
We present an analysis of seasonal cycle of the last 50 years of records of
surface temperature in Italy. We consider two data sets which synthesize the
surface temperature fields of Northern and Southern Italy. Such data sets
consist of records of daily maximum and minimum temperature. We compute the
best estimate of the seasonal cycle of the variables considered by adopting the
cyclograms' technique. We observe that in general the minimum temperature cycle
lags behind the maximum temperature cycle, and that the cycles of the Southern
Italy temperatures records lag behind the corresponding cycles referring to
Northern Italy. All seasonal cycles lag considerably behind the solar cycle.
The amplitude and phase of the seasonal cycles do not show any statistically
significant trend in the time interval considered.Comment: 30 pages, 6 figures, submitted to IJ
Recommended from our members
Design analysis and experimental behavior of precast concrete double-tee girders prestressed with carbon-fiber-reinforced polymer strands
Destructive and Non-Destructive Testing of Bridge J857 Phelps County, Missouri : Strengthening and Testing to Failure of Bridge Piers
Many of the existing reinforced concrete (RC) bridge piers constructed in the first half of this century were designed as gravity piers with minimal flexural reinforcement and no consideration to seismically induced lateral forces. When considered in earlier designs, the seismic lateral forces were typically low. The potential risk of failure of columns on these piers under a moderate earthquake is becoming a growing concern for the transportation management agencies. In addition, flexural strength deficiency in RC columns may arise from the loss of reinforcement due to corrosion, premature termination of the main reinforcement, or inadequate splicing. One method for retrofitting columns with flexural strength deficiencies consists of the addition of a RC or steel jackets. However, these systems may not be very practical due to undesirable section enlargement or construction constraints. Fiber Reinforced Polymers (FRP) have suitable mechanical properties for structural applications such as corrosion resistance and high strength-to-weight ratio. Although a properly designed FRP jacket can improve column compression strength, shear strength, and ductility, it may not sufficiently improve flexural capacity. Near-surface mounted (NSM) FRP rods is another technique that could be used to improve the flexural capacity of RC columns. This strengthening technique consists of FRP rods embedded in grooves made on the surface of the concrete and bonded in place with epoxy. To investigate the applicability and effectiveness of this technique, a research program was carried out in which bridge columns originally designed to carry gravity loads were upgraded and then tested to failure. Flexural strengthening was achieved by mounting carbon FRP (CFRP) rods on two opposite sides of the columns. In addition, the strengthened columns were wrapped with carbon and glass composites to satisfy seismic detailing requirements. The columns were tested to failure by applying lateral load cycles. The behavior of strengthened columns and their failure modes are discussed and conclusions are drawn. Test results indicate that the proposed strengthening is feasible and effective for improving the flexural capacity of RC columns. The capacity of the strengthened sections could be predicted using classical methods of analysis. Full investigation of the upgraded structure should be made to ensure that the deficiency is not shifted to other structural components. The final report consists of three volumes. Volume I depicts the strengthening and testing to failure of the three bridge decks. Volume II focuses on the laboratory and field dynamic tests. Volume III presents the strengthening and testing to failure of the bridge piers
RC BEAMS SHEAR-STRENGTHENED WITH FABRIC-REINFORCED-CEMENTITIOUS-MATRIX (FRCM) COMPOSITE
The interest in retrofit/rehabilitation of existing concrete structures has increased due to degradation and/or introduction of more stringent design requirements. Among the externally-bonded strengthening systems fiber-reinforced polymers is the most widely known technology. Despite its effectiveness as a material system, the presence of an organic binder has some drawbacks that could be addressed by using in its place a cementitious binder as in fabric- reinforced cementitious matrix (FRCM) systems. The pur- pose of this paper is to evaluate the behavior of reinforced concrete (RC) beams strengthened in shear with U-wraps made of FRCM. An extensive experimental program was undertaken in order to understand and characterize this composite when used as a strengthening system. The labo- ratory results demonstrate the technical viability of FRCM for shear strengthening of RC beams. Based on the experi- mental and analytical results, FRCM increases shear strength but not proportionally to the number of fabric plies installed. On the other hand, FRCM failure modes are related with a high consistency to the amount of external reinforcement applied. Design considerations based on the algorithms proposed by ACI guidelines are also provided
Destructive and Non-Destructive Testing of Bridge J857 Phelps County, Missouri : Feasibility Study on Damage Detection of RC Structures using Dynamic Signature Tests
This report presents the results of a research program aimed at investigating the constructability and effectiveness of externally bonded FRP strengthening systems for improving the flexural capacity of bridge decks and piers. The joint effort of two universities, industry, and a state DOT provided the premise for a successful outcome. Bridge J857 was constructed in 1932 and was scheduled for demolition in the fall of 1998 due to highway realignment. Two of the three solid reinforced concrete (RC) decks were strengthened using two FRP systems namely, near-surface mounted carbon FRP (CFRP) rods and surface bonded CFRP sheets. Bridge decks were tested to failure under quasi-static loading cycles. Flexural strengthening of bridge columns was achieved by mounting CFRP rods on two opposite sides of the columns. Columns were also jacketed with carbon and glass FRP laminates. The experimental moment capacities of the decks compared well with theoretical values. Strengthened decks exhibited ductile behavior prior to FRP failure. The columns were tested to failure by applying lateral load cycles. The proposed strengthening technique for the bridge columns is feasible and effective for improving the flexural capacity of RC columns. The capacity of the strengthened column sections could be predicted using classical methods of analysis. Dynamic tests were conducted on the deck strengthened with CFRP sheets. The objective of dynamic tests was to relate the change in fundamental frequency to the induced damage, which could be used as a tool to assess the damage level of RC structural members. An effective damage indicator was identified that requires no baseline for damage level detection
Destructive and Non-Destructive Testing of Bridge J857 Phelps County, Missouri : Strengthening and Testing to Failure of Bridge Decks
Concrete bridges are conventionally reinforced with steel bars and/or prestressed with steel tendons. When subjected to aggressive environments, corrosion of the reinforcing and prestressing steel occurs and eventually leads to premature structural deterioration and loss of serviceability. In addition, the increasing service loads as well as seismic upgrade requirements result in a need to strengthen many of these bridges. The use of externally bonded steel plates for flexural and shear strengthening of concrete members is well established. However, corrosion related problems have limited the use of this technique for outdoor application. Fiber reinforced polymer (FRP) composites are corrosion resistant and exhibit several properties that make them suitable for repair/strengthening of reinforced concrete (RC) structures. However, the database for performance of FRP strengthened RC members is based on small-scale specimens that do not account for the variation of boundary conditions of a real structure. Fullscale field tests can demonstrate the actual behavior of a structure and can lead to a better understanding of the performance of the system and therefore strengthening design requirements.
This part of the research program aimed at demonstrating the feasibility and effectiveness of strengthening bridge RC decks with two systems of externally bonded FRP reinforcement to increase their flexural strengths as well as verify design methodology and capacity improvement. Two of the three simply supported decks were strengthened and tested to failure. One span was strengthened using near-surface mounted (NSM) CFRP rods while the second span was strengthened using externally bonded CFRP strips. The objective of the strengthening scheme was to increase the flexural capacity by approximately 30%. Each of the three spans was tested to failure by applying quasi-static load cycles. Test results indicate that the actual capacity of the bridge decks were higher than anticipated due to higher actual material strengths. In addition, the decks had end fixities that were estimated by comparison of experimental and theoretical results. The experimental moment capacities compared well with theoretical values based on the actual material properties obtained from laboratory testing and the determined end fixity. Strengthened decks exhibited ductile behavior prior to FRP failure. The short-term behavior of FRP strengthening system applications has been experimentally evaluated. Research into longterm performance should be conducted even though FRP used in highway bridges is expected to perform for a long time.
The final report consists of three volumes. Volume I depicts the strengthening and testing to failure of the three bridge decks. Volume II focuses on the laboratory and field dynamic tests. Volume III focuses on the strengthening and testing to failure of the bridge piers
Design and Technologies for a Smart Composite Bridge
An all-composite, smart bridge design for shortspan applications is described. The bridge dimensions are 9.14-m (30-ft.) long and 2.74-m (9-ft.) wide. A modular construction based on assemblies of pultruded fiber-reinforced-polymer (FRP) composite tubes is used to meet American Association of State Highway and Transportation Officials (AASHTO) H20 highway load ratings. The hollow tubes are 76 mm (3 in.) square and are made of carbon/vinyl-ester and glass/vinyl-ester. An extensive experimental study was carried out to obtain and compare properties (stiffness, strength, and failure modes) for a quarter portion of the full-sized bridge. The bridge response was measured for design loading, two-million-cycle fatigue loading, and ultimate load capacity. In addition to meeting H20 load criteria, the test article showed almost no reduction in stiffness or strength under fatigue loading and excellent linear elastic behavior up to failure. Fiber optic strain sensors were evaluated on the test article during testing. Sensor characteristics are determined as preparation for permanent field installation
Recommended from our members
Analytical and experimental shear evaluation of GFRP-reinforced concrete beams
Reinforced Concrete (RC) technology is advancing towards new frontiers enhancing its sustainability and durability through innovative materials. In particular, the application of Glass Fiber Reinforced Polymer (GFRP) bars, in lieu of steel reinforcement, shows excellent performance, especially in aggressive environments. Nevertheless, current international design guidelines and standards tend to be rather conservative, especially concerning shear reinforcement. This element hinders the technology’s competitiveness, not only in terms of material consumption but also in construction efficiency. This research aims to conduct an analytical comparison and experimental validation of the formulations found in some international standards pertaining to shear capacity in a specific case. The focus is on scenarios involving reduced shear reinforcement and cases where the number of stirrups falls below the minimum recommended by these standards. In the sample beam tests, two distinct flexural GFRP reinforcement ratios were employed to evaluate their influence on shear capacity, leading to diverse failure mechanisms: rupture of longitudinal GFRP bars and concrete crushing. The experimental results were used to compare the North American ACI, French AFGC, and Italian CNR shear capacity design approaches in the case of reduced transversal reinforced ratio. Analytical capacity expressions of the standards above are discussed with some remarks aiming at structural optimization
Case-specific parametric analysis as research-directing tool for analysis and design of GFRP-RC structures
This paper presents a parametric analysis of the ACI440 (2015) and AASHTO (2009) algorithms governing the flexural design of a one-way concrete member internally reinforced with glass fiber-reinforced polymer (GFRP) bars. The influence of specific design parameters on the required amount of reinforcement is investigated. The aim is to identify variables and requirements governing the design of a large-section GFRP reinforced concrete (RC) member. The member considered for this case-specific analysis is the reinforced concrete pile cap of the Halls River Bridge (Homosassa, FL), which is deemed representative of large-section GFRP-RC members operating as bent caps in short-span bridges. The influence of four critical parameters on the required amount of reinforcement is assessed. Salient analysis and design implications are discussed with respect to creep and fatigue rupture stress limits, minimum amount of flexural reinforcement, and applicable strength reduction factors. The outcomes of the parametric analysis highlight an untapped potential to reduce the required amount of reinforcement, and prioritize research areas to advance the development of rational design algorithms. Cyclic fatigue and creep rupture are identified as governing mechanisms
Can partial splenectomy preserve humoral immunity in pediatric patients? Risks and benefts of partial splenectomy
Te spleen plays an important role in removing
normal and abnormal cells from
the blood and in providing an immunologic
response to encapsulated bacteria.
Surgical splenectomy provides efective
treatment for several pediatric disorders,
such as congenital and acquired hemolytic
anemias, abdominal traumas and immunological
and metabolic disorders, but it
is associated with an immediate and lifelong
risk of overwhelming infection. An
alternative to conventional splenectomy is
partial splenectomy, recommended especially
in children younger than 5 years of
age. Recommendations for the prevention
of overwhelming post-total splenectomy
infection include: Pneumococcal, Haemophilus
infuenzae type B and Meningococcal
immunizations, antimicrobial prophylaxis
and prompt antibiotic treatment of
acute febrile illness; conversely, there is no
clear evidence indicating which prevention
measures are to be performed in patients
undergoing partial splenectomy
- …