3,481 research outputs found
Measurements of mixed-mode crack surface displacements and comparison with theory
A theoretical and an experimental technique is used to determine crack surface displacements under mixed-mode conditions. Crack surface displacements proved to be quite useful in mode 1 fracture analysis in that they are directly related to strain energy release rate and stress intensity factor. It is felt that similar relationships can be developed for the mixed-mode case. A boundary-integral method was developed for application to two-dimensional fracture mechanics problems. This technique was applied to the mixed-mode problem. A laser interferometry technique, for measurement of crack surface displacements under mixed-mode conditions, is presented. The experimental measurements are reported and the results of the two approaches are compared and discussed
Applications of Partially Quenched Chiral Perturbation Theory
Partially quenched theories are theories in which the valence- and sea-quark
masses are different. In this paper we calculate the nonanalytic one-loop
corrections of some physical quantities: the chiral condensate, weak decay
constants, Goldstone boson masses, B_K and the K+ to pi+ pi0 decay amplitude,
using partially quenched chiral perturbation theory. Our results for weak decay
constants and masses agree with, and generalize, results of previous work by
Sharpe. We compare B_K and the K+ decay amplitude with their real-world values
in some examples. For the latter quantity, two other systematic effects that
plague lattice computations, namely, finite-volume effects and unphysical
values of the quark masses and pion external momenta are also considered. We
find that typical one-loop corrections can be substantial.Comment: 22 pages, TeX, refs. added, minor other changes, version to appear in
Phys. Rev.
Development and application of an interferometric system for measuring crack displacements
The development of the first version of a minicomputer controlled system that converts the fringe pattern motion into a voltage output proportional to displacement is presented. Details of the instrument and the calibration tests are included
Heavy-Meson Observables at One-Loop in Partially Quenched Chiral Perturbation Theory
I present one-loop level calculations of the Isgur-Wise functions for B ->
D^{(*)} + e + nu, of the matrix elements of isovector twist-2 operators in B
and D mesons, and the matrix elements for the radiative decays D^* -> D + gamma
in partially quenched heavy quark chiral perturbation theory. Such expressions
are required in order to extrapolate from the light quark masses used in
lattice simulations of the foreseeable future to those of nature.Comment: 13 pages, 3 fig
Quenched Chiral Perturbation Theory for Vector Mesons
We develop quenched chiral perturbation theory for vector mesons made of
light quarks, in the limit where the vector meson masses are much larger than
the pion mass. We use this theory to extract the leading nonanalytic dependence
of the vector meson masses on the masses of the light quarks. By comparing with
analogous quantities computed in ordinary chiral perturbation theory, we
estimate the size of quenching effects, observing that in general they can be
quite large. This estimate is relevant to lattice simulations, where the
mass is often used to set the lattice spacing.Comment: 18 pages, 8 figures, uses REVTeX and epsf.st
Short fatigue crack behavior in notched 2024-T3 aluminum specimens
Single-edge, semi-circular notched specimens of Al 2024-T3, 2.3 mm thick, were cyclicly loaded at R-ratios of 0.5, 0.0, -1.0, and -2.0. The notch roots were periodically inspected using a replica technique which duplicates the bore surface. The replicas were examined under an optical microscope to determine the initiation of very short cracks and to monitor the growth of short cracks ranging in length from a few tens of microns to the specimen thickness. In addition to short crack growth measurements, the crack opening displacement (COD) was measured for surface cracks as short as 0.035 mm and for through-thickness cracks using the Interferometric Strain/Displacement Gage (ISDG), a laser-based optical technique. The growth rates of short cracks were faster than the long crack growth rates for R-ratios of -1.0 and -2.0. No significant difference between short and long crack growth rates was observed for R = 0.0. Short cracks had slower growth rates than long cracks for R = 0.5. The crack opening stresses measured for short cracks were smaller than those predicted for large cracks, with little difference appearing for positive R-ratios and large differences noted for negative R-ratios
Partial Flavor Symmetry Restoration for Chiral Staggered Fermions
We study the leading discretization errors for staggered fermions by first
constructing the continuum effective Lagrangian including terms of O(a^2), and
then constructing the corresponding effective chiral Lagrangian. The terms of
O(a^2) in the continuum effective Lagrangian completely break the SU(4) flavor
symmetry down to the discrete subgroup respected by the lattice theory. We
find, however, that the O(a^2) terms in the potential of the chiral Lagrangian
maintain an SO(4) subgroup of SU(4). It follows that the leading discretization
errors in the pion masses are SO(4) symmetric, implying three degeneracies
within the seven lattice irreducible representations. These predictions hold
also for perturbatively improved versions of the action. These degeneracies are
observed, to a surprising degree of accuracy, in existing data. We argue that
the SO(4) symmetry does not extend to the masses and interactions of other
hadrons (vector mesons, baryons, etc), nor to higher order in a^2. We show how
it is possible that, for physical quark masses of O(a^2), the new SO(4)
symmetry can be spontaneously broken, leading to a staggered analogue of the
Aoki-phase of Wilson fermions. This does not, however, appear to happen for
presently studied versions of the staggered action.Comment: 26 pages, 2 figures (using psfig). Version to appear in PRD
(clarifications added to introduction and section 6; typos corrected;
references updated
Perturbative matching of staggered four-fermion operators with hypercubic fat links
We calculate the one-loop matching coefficients between continuum and lattice
four-fermion operators for lattice operators constructed using staggered
fermions and improved by the use of fattened links. In particular, we consider
hypercubic fat links and SU(3) projected Fat-7 links, and their mean-field
improved versions. We calculate only current-current diagrams, so that our
results apply for operators whose flavor structure does not allow
``eye-diagrams''. We present general formulae, based on two independent
approaches, and give numerical results for the cases in which the operators
have the taste (staggered flavor) of the pseudo-Goldstone pion. We find that
the one-loop corrections are reduced down to the 10-20% level, resolving the
problem of large perturbative corrections for staggered fermion calculations of
matrix elements.Comment: 37 pages, no figure, 20 table
Chiral Lagrangian Parameters for Scalar and Pseudoscalar Mesons
The results of a high-statistics study of scalar and pseudoscalar meson
propagators in quenched lattice QCD are presented. For two values of lattice
spacing, ( fm) and 5.9 ( fm), we
probe the light quark mass region using clover improved Wilson fermions with
the MQA pole-shifting ansatz to treat the exceptional configuration problem.
The quenched chiral loop parameters and are determined
from a study of the pseudoscalar hairpin correlator. From a global fit to the
meson correlators, estimates are obtained for the relevant chiral Lagrangian
parameters, including the Leutwyler parameters and . Using the
parameters obtained from the singlet and nonsinglet pseudoscalar correlators,
the quenched chiral loop effect in the nonsinglet scalar meson correlator is
studied. By removing this QCL effect from the lattice correlator, we obtain the
mass and decay constant of the ground state scalar, isovector meson .Comment: 36 pages, 12 figures, LaTe
- …