1,982 research outputs found
Narrowband delay tolerant protocols for WSN applications. Characterization and selection guide
This article focuses on delay tolerant protocols for Wireless Sensor Network (WSN) applications, considering both established and new protocols. We obtained a comparison of their characteristics by implementing all of them on an original platform for network simulation, and by testing their behavior on a common test-bench. Thereafter, matching the requirements linked to each application with the performances achieved in the test-bench, allowed us to define an application oriented protocol selection guide
Design and evaluation of buffered triple modular redundancy in interleaved-multi-threading processors
Fault management in digital chips is a crucial aspect of functional safety. Significant work has been done on gate and microarchitecture level triple modular redundancy, and on functional redundancy in multi-core and simultaneous-multi-threading processors, whereas little has been done to quantify the fault tolerance potential of interleaved-multi-threading. In this study, we apply the temporal-spatial triple modular redundancy concept to interleaved-multi-threading processors through a design solution that we call Buffered triple modular redundancy, using the soft-core Klessydra-T03 as the basis for our experiments. We then illustrate the quantitative findings of a large fault-injection simulation campaign on the fault-tolerant core and discuss the vulnerability comparison with previous representative fault-tolerant designs. The results show that the obtained resilience is comparable to a full triple modular redundancy at the cost of execution cycle count overhead instead of hardware overhead, yet with higher achievable clock frequency
Klessydra-T: Designing Vector Coprocessors for Multi-Threaded Edge-Computing Cores
Computation intensive kernels, such as convolutions, matrix multiplication
and Fourier transform, are fundamental to edge-computing AI, signal processing
and cryptographic applications. Interleaved-Multi-Threading (IMT) processor
cores are interesting to pursue energy efficiency and low hardware cost for
edge-computing, yet they need hardware acceleration schemes to run heavy
computational workloads. Following a vector approach to accelerate
computations, this study explores possible alternatives to implement vector
coprocessing units in RISC-V cores, showing the synergy between IMT and
data-level parallelism in the target workloads.Comment: Final revision accepted for publication on IEEE Micro Journa
Total and Partial Fragmentation Cross-Section of 500 MeV/nucleon Carbon Ions on Different Target Materials
By using an experimental setup based on thin and thick double-sided
microstrip silicon detectors, it has been possible to identify the
fragmentation products due to the interaction of very high energy primary ions
on different targets. Here we report total and partial cross-sections measured
at GSI (Gesellschaft fur Schwerionenforschung), Darmstadt, for 500 MeV/n energy
beam incident on water (in flasks), polyethylene, lucite, silicon
carbide, graphite, aluminium, copper, iron, tin, tantalum and lead targets. The
results are compared to the predictions of GEANT4 (v4.9.4) and FLUKA (v11.2)
Monte Carlo simulation programs.Comment: 10pages, 13figures, 4table
A calorimeter coupled with a magnetic spectrometer for the detection of primary cosmic antiprotons
A tracking calorimeter made of 3200 brass streamer tubes together with 3200 pick-up strips has been built to complement a magnetic spectrometer in order to detect cosmic antiprotons in space. The characteristics of such a calorimeter, the results of a preliminary test of a prototype as well as the properties of the whole apparatus are presented. The apparatus, designed to operate on a balloon at an altitude of about 40 km, can be considered as a second generation detector, capable in principle to solve the problem of the presence of low energy (≤1 Ge V/c) antiprotons in the cosmic rays which is still open because of the disagreement between the existent experimental data
A pulsed nanosecond IR laser diode system to automatically test the Single Event Effects in the laboratory
Abstract A pulsed nanosecond IR laser diode system to automatically test the Single Event Effects in laboratory is described. The results of Single Event Latchup (SEL) test on two VLSI chips (VA_HDR64, 0.8 and 1.2 ÎĽm technology) are discussed and compared to those obtained with high-energy heavy ions at GSI (Darmstadt)
Atmospheric production of energetic protons, electrons and positrons observed in near Earth orbit
Abstract Substantial fluxes of protons and leptons with energies below the geomagnetic cutoff have been measured by the AMS experiment at altitudes of 350–390 km, in the latitude interval ±51.7°. The production mechanisms of the observed trapped fluxes are investigated in detail by means of the FLUKA Monte Carlo simulation code. All known processes involved in the interaction of the cosmic rays with the atmosphere (detailed descriptions of the magnetic field and the atmospheric density, as well as the electromagnetic and nuclear interaction processes) are included in the simulation. The results are presented and compared with experimental data, indicating good agreement with the observed fluxes. The impact of the secondary proton flux on particle production in atmosphere is briefly discussed
The internal alignment and position resolution of the AMS-02 silicon tracker determined with cosmic-ray muons
Abstract The Alpha Magnetic Spectrometer is a large acceptance cosmic-ray detector ( 0.5 m 2 sr ) designed to operate at an altitude of 400 km on the International Space Station. The AMS-02 silicon tracker contains 2264 silicon microstrip sensors (total active area 6.75 m 2 ). The internal alignment parameters of the assembled tracker have been determined on the ground with cosmic-ray muons. The alignment procedure is described and results for the alignment precision and position resolution are reported
A silicon imaging calorimeter prototype for antimatter search in space: experimental results
Abstract This report presents the results obtained with a prototype silicon-tungsten (Si-W) electromagnetic calorimeter, conceived as a fine-grained imaging device to carry out studies of the antimatter component in primary cosmic radiation. The calorimeter prototype contains 20 x , y sampling layers interleaved with 19 showering material planes. One sensitive layer is obtained with two silicon strip detectors (Si-D) (60 × 60) mm 2 , each divided into 16 strips, 3.6 mm wide; the two detectors are assembled back to back with perpendicular strips. This allows the transverse distributions of the shower in both coordinates at each sampling (0.5 X 0 ) to be pictured. The basic characteristics of the design and the experimental results obtained on a test beam at the CERN proton synchrotron (PS) for electrons and pions are reported. The main results presented are the response of the calorimeter to the electron at various energies (1–7 GeV), and the transverse shower profiles at different calorimeter depths as well as the patterns of the electromagnetic shower and those of the interacting and non-interacting pions. The capability of the calorimeter in measuring the direction of the incoming electromagnetic particle from the pattern of the shower has been evaluated at different energies. These results are encouraging in view of the possible use of this detector to search for high-energy γ sources in space
- …