58 research outputs found
Optical and evaporative cooling of cesium atoms in the gravito-optical surface trap
We report on cooling of an atomic cesium gas closely above an evanescent-wave
atom mirror. At high densitities, optical cooling based on inelastic
reflections is found to be limited by a density-dependent excess temperature
and trap loss due to ultracold collisions involving repulsive molecular states.
Nevertheless, very good starting conditions for subsequent evaporative cooling
are obtained. Our first evaporation experiments show a temperature reduction
from 10muK down to 300nK along with a gain in phase-space density of almost two
orders of magnitude.Comment: 8 pages, 6 figures, submitted to Journal of Modern Optics, special
issue "Fundamentals of Quantum Optics V", edited by F. Ehlotzk
Ultrafast high power fiber laser systems
Fiber laser systems offer unique properties for the amplification of ultrashort pulses to high powers. Two approaches are discussed, the amplification of linearly chirped parabolic pulses and a fiber based chirped pulse amplification system. Using the first method, we succeeded to generate 17-W average power of linearly chirped parabolic pulses at 75 MHz repetition rate and diffraction-limited beam quality in a large-mode-area ytterbium-doped fiber amplifier. The recompression of these pulses with an efficiency of 60% resulted in 80-fs pulses with a peak power of 1.7 MW. Furthermore, we report on a diode-pumped ytterbium-doped double-clad fiber based chirped pulse amplification system delivering 220-fs pulses, at 1040 nm wavelength, 73 MHz repetition rate and up to 131 W average power, corresponding to a peak power of 8 MW. Key element is a diffraction grating compressor consisting of highly efficient transmission gratings in fused silica allowing the recompression at this high power. To cite this article: J. Limpert et al., C. R. Physique
Crack-free high-aspect ratio holes in glasses by top–down percussion drilling with infrared femtosecond laser GHz-bursts
We report novel results on top-down percussion drilling in different glasses with femtosecond laser GHz-bursts. Thanks to this particular regime of light – matter interaction, combining non-linear absorption and thermal cumulative effects, we obtained crack-free holes of aspect ratios exceeding 30 in sodalime and 70 in fused silica. The results are discussed in terms of inner wall morphology, aspect ratio and drilling speed
Double-track waveguides inside calcium fluoride crystals
Calcium Fluoride (CaF2) was selected owing to its cubic symmetry and excellent luminescence properties as a crystal of interest, and ultrafast laser inscription of in-bulk double-track waveguides was realized. The guiding properties of these waveguides in relation to the writing energy of the femtosecond pulse are presented. The modified double-track waveguides have been studied by systematic developments of beam propagation experiments and numerical simulations. Furthermore, an adapted model and concepts were engaged for the quantitative and qualitative characterization of the waveguides, particularly for the transmission loss measurements and the three-dimensional refractive index mappings of the modified zones. Additionally, polarization-dependent guiding was investigated.Initiative d'excellence de l'Université de Bordeau
Comparative Study of Percussion Drilling in Glasses with a Femtosecond Laser in Single Pulse, MHz-Burst, and GHz-Burst Regimes and Optimization of the Hole Aspect Ratio
In this contribution, we present a comparative study on top-down drilling in sodalime glass, with a femtosecond laser operating in single-pulse, MHz-burst and GHz-burst modes, respectively. We investigate the hole depth, drilling rate, and hole morphology for these three regimes while keeping the same experimental conditions. We demonstrate that, for both burst regimes, the burst length has to be adapted for optimizing the hole depth. In the GHz-burst regime, the lower the ablation rate the longer the holes. The three drilling regimes lead to different hole morphologies, where the GHz-burst mode results in the best hole quality featuring glossy inner walls and an almost cylindrical morphology. Furthermore, we obtain crack-free holes, the deepest measuring 3.7 mm in length and 25 µm in entrance diameter corresponding to an aspect ratio of 150, which is the highest aspect ratio reported thus far with femtosecond GHz-burst drilling to the best of our knowledge
Bessel Beam Dielectrics Cutting with Femtosecond Laser in GHz-Burst Mode
We report, for the first time to the best of our knowledge, Bessel beam dielectrics cutting with a femtosecond laser in GHz-burst mode. The non-diffractive beam shaping is based on the use of an axicon and allows for cutting glasses up to 1 mm thickness with an excellent cutting quality. Moreover, we present a comparison of the cutting results with the state-of-the-art method, consisting of short MHz-bursts of femtosecond pulses. We further illustrate the influence of the laser beam parameters such as the burst energy and the pitch between consecutive Bessel beams on the machining quality of the cutting plane and provide process windows for both regimes
Experimental and numerical study of a monolithic single-oscillator thulium-doped fiber laser in continuous-wave regime
International audienc
- …