Effect of distributed energy systems on the electricity grid

A feasibility study is being carried out at Ecotricity into a distributed energy storage system comprising Energy stores (batteries) placed at consumer level (in customer’s homes). The aim is to flatten consumer demand and make better use of home-based generation. The Study Group considered the mechanism of connecting batteries to the local distribution system, the ability to meet engineering requirements for the standard of the connection, and the potential impact of large numbers of such connections on stability of the local distribution network. Network and (DC-AC) invertor models were used to examine network connection transients. A statistical model was proposed to estimate the distribution of key electrical parameters to determine the likelihood of engineering standards being exceeded. The Study Group also considered stochastic methods of modelling wind speed, to better understand the requirements for battery energy storage as a complement to wind power

Aerodynamic investigations of ventilated brake discs.

The heat dissipation and performance of a ventilated brake disc strongly depends on the aerodynamic characteristics of the flow through the rotor passages. The aim of this investigation was to provide an improved understanding of ventilated brake rotor flow phenomena, with a view to improving heat dissipation, as well as providing a measurement data set for validation of computational fluid dynamics methods. The flow fields at the exit of four different brake rotor geometries, rotated in free air, were measured using a five-hole pressure probe and a hot-wire anemometry system. The principal measurements were taken using two-component hot-wire techniques and were used to determine mean and unsteady flow characteristics at the exit of the brake rotors. Using phase-locked data processing, it was possible to reveal the spatial and temporal flow variation within individual rotor passages. The effects of disc geometry and rotational speed on the mean flow, passage turbulence intensity, and mass flow were determined. The rotor exit jet and wake flow were clearly observed as characterized by the passage geometry as well as definite regions of high and low turbulence. The aerodynamic flow characteristics were found to be reasonably independent of rotational speed but highly dependent upon rotor geometry

Computational study of a complex three-dimensional shock boundary-layer interaction

Shock boundary–layer interactions occur in many high-speed aerodynamic flows and they can have a notable impact on design considerations due to the aerodynamic and heat transfer effects. Consequently there is a notable interest in understanding the ability of computational tools to calculate the complex flow fields that can arise in a range of engineering applications. Three-dimensional complex shock boundary layer interaction studies are expensive in both time and computational resources. Although recent studies have begun to focus on the use of more complex computational methods such as large eddy simulations, the aim of this research is to assess the ability of steady Reynolds averaged Navier Stokes turbulence models to simulate the interaction of a planar shock impinging on a cylindrical body under supersonic conditions and to determine if these models have a role to play in engineering design applications. The performance of both eddy viscosity and Reynolds stress models are evaluated relative to an established experimental test case. The impact of Reynolds number and impinging shock strength are also considered. Of the eddy viscosity models it was shown that the Spalart-Allmaras model is unsuitable for this complex interaction and that the k- and Reynolds stress methods both gave notably better agreement with the measured surface static pressures. Overall it was considered that the Reynolds stress method was the best model as it also provided better agreement with the measured surface flow topology. It was concluded that, although a steady Reynolds averaged Navier Stokes approach has known limitations for this type of complex interaction, within an engineering context it can also provide useful results when applied appropriately

Short and slim nacelle design for ultra-high BPR engines

An optimisation method consisting of the non-dominated sorting genetic algorithm (NSGA-II) and computational fluid dynamics of aero-engine nacelles is outlined. The method is applied to three nacelle lengths to determine the relative performance of different ultra-high bypass ratio engine nacelles. The optimal designs at each nacelle length are optimised for three objective functions: cruise drag, drag rise Mach number and change in spillage drag from mid to end of cruise. The Pareto sets generated from these optimisation computations demonstrate that the design space for short nacelles is much narrower in terms of these performace metrics and there are significant penalties in the off design conditions compared to the longer nacelle. Specifically the minimum spillage drag coefficient attainable, for a nacelle with a drag rise Mach number above 0.87, was 0.0040 for the shortest nacelle compared to 0.0005 for a nacelle which was 23% longer

An optimization method for nacelle design

A multi-objective optimiZation method is demonstrated using an evolutionary genetic algorithm. The applicability of this method to preliminary nacelle design is demonstrated by coupling it with a response surface model of a wide range of nacelle designs. These designs were modelled using computational fluid dynamics and a Kriging interpolation was carried out on the results. The NSGA-II algorithm was tested and verified on established multi-dimensional problems. Optimisation on the nacelle model provided 3-dimensional Pareto surfaces of optimal designs at both cruise and off-design conditions. In setting up this methodology several adaptations to the basic NSGA-II algorithm were tested including constraint handling, weighted objective functions and initial sample size. The influence of these operators is demonstrated in terms of the hyper volume of the determined Pareto set

Intake Ground Vortex Prediction Methods

For an aircraft turbofan engine in ground operations or during the take-off run a ground vortex can occur which is ingested and could potentially adversely affect the engine performance and operation. The vortex characteristics depend on the ground clearance, intake flow capture ratio and the relative wind vector. It is a complex flow for which there is currently very little appropriate quantitative preliminary design information. These aspects are addressed in this work where a range of models are developed to provide a method for estimating the key metrics such as the formation boundary and the ground vortex size and strength. Three techniques are presented which utilize empirical, analytical and semi-empirical approaches. The empirical methods are primarily based on a large dataset of model-scale experiments which quantitatively measured the ground vortex characteristics for a wide range of configurations. These include the effects of intake ground clearance, approaching boundary layer thickness, intake Mach number and capture velocity ratio. Overall the models are able to predict some of the key measured behaviours such as the velocity ratio for maximum vortex strength. With increasing empiricism for key sub-elements of the model construction, an increasing level of agreement is found with the experimental results. Overall the three techniques provide a relatively quick and easy method in establishing the important vortex characteristics for a given headwind configuration which is of significant use from a practical engineering perspective

Parametric study of turbine NGV blade lean and vortex design

The effects of blade lean and vortex design on the aerodynamics of a turbine entry nozzle guide vane (NGV) are considered using computational fluid dynamics. The aim of the work is to address some of the uncertainties which have arisen from previous studies where conflicting results have been reported for the effect on the NGV. The configuration was initially based on the energy efficient engine turbine which also served as the validation case for the computational method. A total of 17 NGV configurations were evaluated to study the effects of lean and vortex design on row efficiency and secondary kinetic energy. The distribution of mass flow ratio is introduced as an additional factor in the assessment of blade lean effects. The results show that in the turbine entry NGV, the secondary flow strength is not a dominant factor that determines NGV losses and therefore the changes of loading distribution due to blade lean and the associated loss mechanisms should be regarded as a key factor. Radial mass flow redistribution under different NGV lean and twist is demonstrated as an addition key factor influencing row efficiency

Flow distortion measurements in convoluted aero engine intakes

The unsteady flowfields generated by convoluted aero engine intakes are major sources of instabilities that can compromise the performance of the downstream turbomachinery components. Hence, there exists a need for high spatial and temporal resolution measurements that will allow a greater understanding of the aerodynamics. Stereoscopic Particle Image Velocimetry is capable of providing such fidelity but its application has been limited previously as the optical access through cylindrical ducts for air flow measurements constitutes a notable pitfall for this type of measurements. This paper presents a suite of S-PIV measurements and flow field analysis in terms of snapshot, statistical and time-averaged measurements for two S-duct configurations across a range of inlet Mach numbers. The flow assessments comprise effects of inlet Mach number and S-duct centerline offset distance. Overall, the work demonstrates the feasibility of using S-PIV techniques for determining the complex flow field at the exit of convoluted intakes with at least two orders of magnitude higher spatial resolution than the traditional pressure rake measurements allow. Analysis of the conventional distortion descriptors quantifies the dependency upon the S-duct configuration and highlights that the more aggressive duct generates twice the levels of swirl distortion than the low offset one. The analysis also shows a weak dependency of the distortion descriptor magnitude upon the inlet Mach number across the entire range of Mach numbers tested. A statistical assessment of the unsteady distortion history over the data acquisition time highlights the dominant swirl patterns of the two configurations. Such an advancement in measurement capability enables a significantly more substantial steady and unsteady flow analyses and highlights the benefits of synchronous high resolution three component velocity measurements to unlock the aerodynamics of complex engine-intake systems

Intake ground vortex characteristics

The development of ground vortices when an intake operates in close proximity to the ground has been studied computationally for several configurations including front and rear quarter approaching flows as well as tailwind arrangements. The investigations have been conducted at model scale using a generic intake geometry. Reynolds Averaged Navier–Stokes calculations have been used and an initial validation of the computational model has been carried out against experimental data. The computational method has subsequently been applied to configurations that are difficult to test experimentally by including tailwind and rear quarter flows. The results, along with those from a previous compatible study of headwind and pure cross-wind configurations, have been used to assess the ground vortex behaviour under a broad range of velocity ratios and approaching wind angles. The characteristics provide insights on the influence of the size and strength of ground vortices on the overall quality of the flow ingested by the intake

Poincaré inequalities and Sobolev spaces

Our understsanding of the interplay between Poincaré inequalities, Sobolev inequalities and the geometry of the underlying space has changed considerably in recent years. These changes have simultaneously provided new insights into the classical theory and allowed much of that theory to be extended to a wide variety of different settings. This paper reviews some of these new results and techniques and concludes with an example on the preservation of Sobolev spaces by the maximal function