1,203 research outputs found
The essential oil of Thymbra capitata and its application as a biocide on stone and derived surfaces
Many chemicals used nowadays for the preservation of cultural heritage pose a risk to both human health and the environment. Thus, it is desirable to find new and eco-friendly biocides that can replace the synthetic ones. In this regard, plant essential oils represent effective alternatives to synthetic substances for the preservation of historical monuments. Thymbra capitata (syn. Thymus capitatus) is a medicinal and aromatic plant growing in the Mediterranean area and endowed with important pharmacological properties related to its essential oil. Among them, the antimicrobial ones make the T. capitata essential oil an ideal candidate for industrial applications; for instance, as biocide for the inhibition and elimination of biological patinas of cyanobacteria and green algae on historical monuments. In the present work, we studied the chemical composition of the essential oil from T. capitata growing in Malta by gas chromatography-mass spectrometry (GC/MS). The major volatile component is the phenolic monoterpene carvacrol (73.2%), which is capable of damaging the cytoplasmic membrane and to interfere both in the growth curve and in the invasive capacity, though the contribution of minor components γ-terpinene and p-cymene cannot be disregarded. For the oil application on the stone surface, Pickering emulsions systems were prepared with an essential oil/water 1:3 mass ratio stabilized with kaolinite at 4 mass% in the presence of Laponite®; this allowed to limit the fast volatility of the oil and guaranteed a better application and an easier removal from the artefacts attacked by biodeteriogens both indoor and outdoor. This formulation caused the elimination of biodeteriogens from treated surfaces without residuals or films on artworks surface, and the effect was retained up to four months
E-Cadherin in Pancreatic Ductal Adenocarcinoma: A Multifaceted Actor during EMT
Epithelial-to-mesenchymal transition (EMT) is a step-wise process observed in normal and tumor cells leading to a switch from epithelial to mesenchymal phenotype. In tumors, EMT provides cancer cells with a metastatic phenotype characterized by E-cadherin down-regulation, cytoskeleton reorganization, motile and invasive potential. E-cadherin down-regulation is known as a key event during EMT. However, E-cadherin expression can be influenced by the different experimental settings and environmental stimuli so that the paradigm of EMT based on the loss of E-cadherin determining tumor cell behavior and fate often becomes an open question. In this review, we aimed at focusing on some critical points in order to improve the knowledge of the dynamic role of epithelial cells plasticity in EMT and, specifically, address the role of E-cadherin as a marker for the EMT axis
Ice/frost detection using millimeter wave radiometry
A series of ice detection tests was performed on the shuttle external tank (ET) and on ET target samples using a 35/95 GHz instrumentation radiometer. Ice was formed using liquid nitrogen and water spray inside a test enclosure containing ET spray on foam insulation samples. During cryogenic fueling operations prior to the shuttle orbiter engine firing tests, ice was formed with freon and water over a one meter square section of the ET LOX tank. Data analysis was performed on the ice signatures, collected by the radiometer, using Georgia Tech computing facilities. Data analysis technique developed include: ice signature images of scanned ET target; pixel temperature contour plots; time correlation of target data with ice present versus no ice formation; and ice signature radiometric temperature statistical data, i.e., mean, variance, and standard deviation
A 94/183 GHz multichannel radiometer for Convair flights
A multichannel 94/183 GHz radiometer was designed, built, and installed on the NASA Convair 990 research aircraft to take data for hurricane penetration flights, SEASAT-A underflights for measuring rain and water vapor, and Nimbus-G underflights for new sea ice signatures and sea surface temperature data (94 GHz only). The radiometer utilized IF frequencies of 1, 5, and 8.75 GHz about the peak of the atmospheric water vapor absorption line, centered at 183.3 GHz, to gather data needed to determine the shape of the water molecule line. Another portion of the radiometer operated at 94 GHz and obtained data on the sea brightness temperature, sea ice signatures, and on areas of rain near the ocean surface. The radiometer used a multiple lens antenna/temperature calibration technique using 3 lenses and corrugated feed horns at 94 GHz and 183 GHz. Alignment of the feed beams at 94 GHz and 183 GHz was accomplished using a 45 deg oriented reflecting surface which permitted simultaneous viewing of the feeds on alternate cycles of the chopping intervals
Improvements In The Fracture Cleavage Testing Of Adhesively-Bonded Wood
Previous researchers have used the contoured dual cantilever beam, DCB, to demonstrate the value of fracture testing for bonded wood. However, use of the contoured specimen is laborious and stringent, preventing the routine application of this powerful test. A simplified method for mode I fracture testing of adhesively-bonded wood is presented here. Two significant improvements are shown: 1) data analysis using a shear corrected compliance method derived from beam theory, and 2) the flat DCB geometry. The shear corrected compliance method is both simple and robust, accounting for variations in wood modulus that often confound traditional shear mode tests. The flat DCB geometry greatly simplifies sample preparation, eliminating difficulties associated with the preparation, calibration, and wood selection that are required with the composite contoured DCB. Real-time crack length measurements required for the flat geometry are routine using digital hardware. The sensitivity and simplification of the method are presented in hopes of promoting the wider adoption of fracture testing for bonded wood
A geographic information method for managing urban energy use
This paper presents a geographical information method to support urban-level energy policies. It proposes using a geographical information system to store, display, edit, share and analyse geographical information for territorial decision-making. The method was used to help develop a sustainable energy action plan for the municipality of Randazzo in Sicily, Italy, by providing an accurate representation of actual energy consumption. Based on this case study, the use of a geographical information system appears to be a suitable support tool for both developing and managing sustainable energy action plans, regardless of the geographical area or context. This method will help municipalities estimate and monitor the energy consumption of residential, commercial and industrial buildings and, by taking into account the approaches of different stakeholders, help develop more accurate models for reducing urban carbon dioxide emissions
Development of an Equilibrium-based Model of Gasification of Biomass by Aspen Plus
Abstract Agricultural and forestry residues are usually processed as wastes; otherwise, they can be recovered to produce electrical and thermal energy through processes of thermochemical conversion, such us torrefaction, pyrolysis and gasification. Currently, the gasification of residual biomass for producing neutral CO 2 fuel for energy production is in development stage. In this context, this study proposes anequilibrium-based model, developed by the commercial software Aspen Plus, of a co-current gasifier fueled with agriculture residual, which allows estimating the chemical composition and theheating value of the syngas produced. The prediction of such model includes the main gaseous species, the yields of char and tar and describes the gasification process through the mass and energy balances, the water-gas shift (WGS) and the methanation reaction. The model validation was carried out through the comparison with experimental data, concerning two biomass with different moisture content and different gasification conditions, for sixteen cases compared. Overall, the comparison between the results of the simulations and the experimental data have shown a good agreement
- …