A three-dimensional finite element model of maximal grip loading in the human wrist

The aim of this work was to create an anatomically accurate three-dimensional finite element model of the wrist, applying subject-specific loading and quantifying the internal load transfer through the joint during maximal grip. For three subjects, representing the anatomical variation at the wrist, loading on each digit was measured during a maximal grip strength test with simultaneous motion capture. The internal metacarpophalangeal joint load was calculated using a biomechanical model. High-resolution magnetic resonance scans were acquired to quantify bone geometry. Finite element analysis was performed, with ligaments and tendons added, to calculate the internal load distribution. It was found that for the maximal grip the thumb carried the highest load, an average of 72.2 ¡ 20.1 N in the neutral position. Results from the finite element model suggested that the highest regions of stress were located at the radial aspect of the carpus. Most of the load was transmitted through the radius, 87.5 per cent, as opposed to 12.5 per cent through the ulna with the wrist in a neutral position. A fully three-dimensional finite element analysis of the wrist using subject-specific anatomy and loading conditions was performed. The study emphasizes the importance of modelling a large ensemble of subjects in order to capture the spectrum of the load transfer through the wrist due to anatomical variation

Characterization of Grazing Patterns in Cool-Season Annual and Warm-Season Perennial Grass Pastures

Pastures are often either under- or over-grazed, which can affect both pasture sustainability and livestock performance. Disk meter heights were measured for rye (Secale cereale L.) -ryegrass (Lolium L. multiflorum Lam.) pasture to characterize stocking rate (2.5, 3.7, and 4.9 steers/ha) effects on grazing patterns. In another study, grazing indices were calculated for bermudagrass [Cynodon dactylon (L.) Pers.] to describe pasture utilization over time for three stocking rates (3.0, 5.9, 8.9 steers/ha). Distributions of DMH for rye-ryegrass showed distinct grazing patterns for each stocking rate, with the distributions changing from bimodal to multi-modal from heavy to light stocking rates. Bermudagrass was not pattern grazed, but grazing indices showed that the extent that pastures were grazed was not consistent over time for any of the stocking rates

Consolidation-induced improvements in plate anchor capacity

acceptedVersio

3D Coronary Vessel Reconstruction from Bi-Plane Angiography Using Graph Convolutional Networks

X-ray coronary angiography (XCA) is used to assess coronary artery disease and provides valuable information on lesion morphology and severity. However, XCA images are 2D and therefore limit visualisation of the vessel. 3D reconstruction of coronary vessels is possible using multiple views, however lumen border detection in current software is performed manually resulting in limited reproducibility and slow processing time. In this study we propose 3DAngioNet, a novel deep learning (DL) system that enables rapid 3D vessel mesh reconstruction using 2D XCA images from two views. Our approach learns a coarse mesh template using an EfficientB3-UNet segmentation network and projection geometries, and deforms it using a graph convolutional network. 3DAngioNet outperforms similar automated reconstruction methods, offers improved efficiency, and enables modelling of bifurcated vessels. The approach was validated using state-of-the-art software verified by skilled cardiologists

Mechanical testing and modelling of the Universal 2 implant

Understanding the load mechanics of orthopaedic implants is important to be able to predict their behaviour in-vivo. Much research, both mechanical and clinical, has been carried out on hip and knee implants, but less has been written about the mechanics of wrist implants. In this paper, the load mechanics of the Universal 2 wrist implant have been measured using two types of measuring techniques, strain gauges and Fibre Bragg Grating measurements to measure strains. The results were compared to a finite element model of the implant. The results showed that the computational results were in good agreement with the experimental results. Better understanding of the load mechanics of wrist implants, using models and experimental results can catalyse the development of future generation implants

Modelling Seabed Ploughing Using the Material Point Method

Ploughing of the seabed is needed for the installation of cables and pipelines and is an area of construction likely to increase given plans in the UK and elsewhere for offshore marine energy (wind and tidal). Seabed ploughing is an expensive and sometimes risky operation for which there are limited guidelines as to what the tow force and speed is for an expected trenching profile within a specified ground condition. Most ploughing schemes are designed using semi-empirical approaches, with very few computational tools able to take into account the geometric and material nonlinearity inherited by the ploughing problem. In this paper we describe how the Material Point Method (MPM) is being used as a numerical tool to model seabed ploughing with the aim of providing an improved predictive tool for the future, via an EPSRC-funded research project at Durham and Dundee Universities. Various issues are discussed in the paper including the means of modelling moving essential boundaries and the choice of basis functions, and this new method in MPM is demonstrated on a simple ploughing problem

Insecticide resistance and the future of malaria control in Zambia.

BACKGROUND: In line with the Global trend to improve malaria control efforts a major campaign of insecticide treated net distribution was initiated in 1999 and indoor residual spraying with DDT or pyrethroids was reintroduced in 2000 in Zambia. In 2006, these efforts were strengthened by the President's Malaria Initiative. This manuscript reports on the monitoring and evaluation of these activities and the potential impact of emerging insecticide resistance on disease transmission. METHODS: Mosquitoes were captured daily through a series of 108 window exit traps located at 18 sentinel sites. Specimens were identified to species and analyzed for sporozoites. Adult Anopheles mosquitoes were collected resting indoors and larva collected in breeding sites were reared to F1 and F0 generations in the lab and tested for insecticide resistance following the standard WHO susceptibility assay protocol. Annual cross sectional household parasite surveys were carried out to monitor the impact of the control programme on prevalence of Plasmodium falciparum in children aged 1 to 14 years. RESULTS: A total of 619 Anopheles gambiae s.l. and 228 Anopheles funestus s.l. were captured from window exit traps throughout the period, of which 203 were An. gambiae malaria vectors and 14 An. funestus s.s.. In 2010 resistance to DDT and the pyrethroids deltamethrin, lambda-cyhalothrin and permethrin was detected in both An. gambiae s.s. and An. funestus s.s.. No sporozoites were detected in either species. Prevalence of P. falciparum in the sentinel sites remained below 10% throughout the study period. CONCLUSION: Both An. gambiae s.s. and An. funestus s.s. were controlled effectively with the ITN and IRS programme in Zambia, maintaining a reduced disease transmission and burden. However, the discovery of DDT and pyrethroid resistance in the country threatens the sustainability of the vector control programme

Effect of root age on the biomechanics of seminal and nodal roots of barley (<i>Hordeum vulgare L.</i>) in contrasting soil environments

Acknowledgments The James Hutton Institute receives funding from the Scottish Government. The authors would also like to thank Jim McNicol from Biomathematics and Statistics Scotland for his advice on statistical analysis.Peer reviewedPostprin