1,841 research outputs found
Multi-material Ti6Al4V & PEEK cellular structures produced by Selective Laser Melting and Hot Pressing: A tribocorrosion study targeting orthopedic applications
This work was supported by FCT through the grants SFRH/BD/128657/2017 and SFRH/BPD/112111/2015, the project PTDC/EMSTEC/5422/2014 and also by project NORTE 01–0145_FEDER-000018. Additionally, this work was supported by FCT with the reference project UID/EEA/04436/2013, by FEDER funds through the COMPETE 2020 – Programa Operacional Competitividade e Internacionalização (POCI) with the reference project POCI-01–0145-FEDER-006941.Ti6Al4V-alloy is commonly used in dental and orthopedic applications where tribochemical reactions occur at material/bone interface. These reactions are one of the main concerns regarding Ti6Al4V implants due to the generation of wear particles, linked to the release of metallic ions in toxic concentration which occurs when TiO2 passive film is destroyed by means of wear and corrosion simultaneously. In the present study, a multi-material Ti6Al4V-PEEK cellular structure is proposed. Selective Laser Melting technique was used to produce Ti6Al4V dense and cellular structured specimens, whilst Hot-Pressing technique was employed to obtain multi-material Ti6Al4V-PEEK structures. This study investigates the tribocorrosion behavior of these materials under reciprocating sliding, comparing them with commercial forged Ti6Al4V. Open-circuit-potential was measured before, during and after sliding while dynamic coefficient of friction was assessed during sliding. The results showed an improved wear resistance and a lower tendency to corrosion for the multi-material Ti6Al4V-PEEK specimens when compared to dense and cellular structures mono-material specimens. This multi-material solution gathering Ti6Al4V and PEEK, besides being able to withstand the loads occurring after implantation on dental and orthopedic applications, is a promising alternative to fully dense metals once it enhances the tribocorrosion performance.info:eu-repo/semantics/publishedVersio
Predicting the output dimensions, porosity and elastic modulus of additive manufactured biomaterial structures targeting orthopedic implants
This work was supported by FCT (Fundação para a Ciência e a Tecnologia) through the grant FRH/BD/128657/2017, the projects PTDC/EMS-TEC/5422/2014_ADAPTPROSTHESIS, POCI-01-0145-FEDER-030353 (SMARTCUT), NORTE 010145_FEDER-000018-HAMaBICo and UID/EEA/04436/2019.SLM accuracy for fabricating porous materials is a noteworthy hindrance when aiming to obtain biomaterial
cellular structures owing precise geometry, porosity, open-cells dimension and mechanical properties as outcomes. This study provides a comprehensive characterization of seventeen biomaterial Ti6Al4V-based structures in which experimental and numerical investigations (compression stress-strain tests) were carried out. Monomaterial Ti6Al4V cellular structures and multi-material Ti6Al4V-PEEK cellular structures were designed, produced by SLM and characterized targeting orthopedic implants. In this work, the differences between the CAD design and the as-produced Ti6Al4V-based structures were obtained from image analysis and were used to develop predictive models. The results showed that dimensional deviations inherent to SLM fabrication are systematically found for different dimensional ranges. The present study proposes several mathematical models, having high coefficients of determination, that estimate the real dimensions, porosity and elastic modulus of Ti6Al4V-based cellular structures as function of the CAD model. Moreover, numerical analysis was performed to estimate the octahedral shear strain for correlating with bone mechanostat theory limits. The developed models can help engineers to design and obtain near-net shape SLM biomaterials matching the desired geometry, opencells dimensions, porosity and elastic modulus. The obtained results show that by using these AM structures design it is possible to fabricate components exhibiting a strain and elastic modulus that complies with that of bone, thus being suitable for orthopedic implants.info:eu-repo/semantics/publishedVersio
3D Multi-Material Laser Powder Bed Fusion: a disruptive approach to design/manufacture unparalleled multi-functional solutions
[Excerpt] Engineering has been so far a mono-dimension tool where components are mono-material, dense unoptimized and designed for one or two requirements, due to processes’ limitations. Traditional components diverge entirely from lightweight and multi-material nature structures endowed with a high level of multi-functionality. [...]This work was supported by FCT national funds, under the national support to R&D units grant, through the reference projects UIDB/04436/2020 and UIDP/04436/2020
A study on the production of thin-walled Ti6Al4V parts by selective laser melting
Acknowledgements:
This work is supported by FCT - Fundação para a Ciência e a Tecnologia through the grant FRH/BPD/112111/2015 and the projects PTDC/EMS-TEC/5422/2014 and NORTE-01-0145-FEDER-
000018-HAMaBICo. Additionally, this work is supported by FCT with the reference project UID/EEA/04436/2013, by FEDER funds through the COMPETE 2020 – Programa Operacional Competitividade e Internacionalização (POCI) with the reference project POCI-01-0145-FEDER-006941.Selective Laser Melting (SLM) is an extremely versatile technology especially suited for the manufacturing of
thin-walled parts. Micro-sized parts are highly influenced and dependent on the SLM processing parameters; thus being indispensable to assess the influence of processing parameters on SLM fabrication, as isolated parameters but also their interactions. In this study, the influence of SLM laser power and scanning speed on Ti6Al4V micropillars and micro-plates thickness was assessed by applying response surface methodology (RSM). These analyses resulted in four models that exhibit complex correlations of SLM process parameters, with non-linear equations, having coefficients of determination that assess the quality of the models. These developed models are accurate tools that can be used to optimize the micro manufacture of Ti6Al4V thin-walled parts by SLM.info:eu-repo/semantics/publishedVersio
Development of β-TCP-Ti6Al4V structures: Driving cellular response by modulating physical and chemical properties
Acknowledgments
This work was supported by FCT (Fundação para a Ciência e Tecnologia) through the grants SFRH/BD/140191/2018; SFRH/BPD/112111/2015, SFRH/BD/128657/2017, SFRH/BD/141056/2018; SFRH/BPD/97701/2013, PD/BDE/127836/2016, and the projects PTDC/EMS-TEC/5422/2014_ADAPTPROSTHESIS and NORTE-01-
0145-FEDER-000018-HAMaBICo. Additionally, this work was supported by FCT with the reference project UID/EEA/04436/2013, by FEDER funds through the COMPETE 2020 – Programa Operacional Competitividade e Internacionalização (POCI) with the reference project POCI-01-0145-FEDER-006941.Load-bearing implants success is strongly dependent on several physical and chemical properties that are known to drive cellular response. In this work, multi-material β-TCP-Ti6Al4V cellular structures were designed to combine Ti6Al4V mechanical properties and β-Tricalcium Phosphate bioactivity, in order to promote bone ingrowth as the bioactive material is being absorbed and replaced by newly formed bone. In this sense, the produced structures were characterized regarding roughness, wettability, β-TCP quantity and quality inside the structures after fabrication and the pH measured during cell culture (as consequence of β-TCP dissolution) and those aspects were correlated with cellular viability, distribution, morphology and proliferation. These structures displayed a hydrophilic behavior and results showed that the addition of β-TCP to these
cellular structures led to an alkalization of the medium, aspect that significantly influences the cellular response. Higher impregnation ratios were found more adequate for lowering the media pH and toxicity, and thus enhance cell adhesion and proliferation.info:eu-repo/semantics/publishedVersio
45S5 BAG-Ti6Al4V structures: The influence of the design on some of the physical and chemical interactions that drive cellular response
This work was supported by FCT (Fundação para a Ciência e Tecnologia) through the grants SFRH/BPD/112111/2015, SFRH/BD/128657/2017, PD/BDE/127836/2016, SFRH/BPD/97701/2013, SFRH/
BD/141056/2018, SFRH/BD/140191/2018 and the projects PTDC/EMSTEC/5422/2014 and NORTE-01-0145-FEDER-000018-HAMaBICo. Additionally, this work was supported by FCT with the reference project
UID/EEA/04436/2013, by FEDER funds through the COMPETE 2020 – Programa Operacional Competitividade e Internacionalização (POCI) with the reference project POCI-01-0145-FEDER-006941.Multi-material Ti6Al4V cellular structures impregnated with 45S5 bioactive glass were designed and produced
using Selective LaserMelting (SLM), an additive manufacturing technique, combinedwith Press and Sintering focusing on load bearing components like hip implants. These structures were designed to combine Ti6Al4V mechanical properties and promote bone ingrowth into the structure as the bioactive material (45S5) is being
absorbed and replaced by newly formed bone. The influence of these structures design on some of the physical and chemical aspects that drive cellular response was assessed. Roughness, wettability, bioactive glass quantity and quality on the structures after processing and the pH measured during cell culture (as a consequence of bioactive glass dissolution) were evaluated and correlated with cellular viability, cellular distribution, morphology and proliferation on the surface and inside the structures.info:eu-repo/semantics/publishedVersio
Measurement of and mesons in Al+Al collisions at 1.9 GeV
New measurement of sub-threshold and production is
presented. The experimental data complete the measurement of strange particles
produced in Al+Al collisions at 1.9 GeV measured with the FOPI detector at
SIS/GSI. The / yield ratio is found to be and is in good agreement with the
UrQMD model prediction. These measurements provide information on in-medium
cross section of - fusion which is the dominant process on
sub-threshold production.Comment: 5 pages, 4 figures, accepted for publication in Phys. Rev.
- …