3,298 research outputs found
Syntheses of (+)-30-epi-, (-)-6-epi-, (±)-6,30-epi-13,14-didehydroxyisogarcinol and (±)-6,30-epi-garcimultiflorone A utilizing highly diastereoselective, Lewis acid-controlled cyclizations
The first syntheses of 13,14-didehydroxyisogarcinol (6) and garcimultiflorone A (5) stereoisomers are reported in six steps from a commercially available phloroglucinol. Lewis acid-controlled, diastereoselective cationic oxycyclizations enabled asymmetric syntheses of (-)-6-epi-6 and (+)-30-epi-6. A similar strategy enabled production of the meso-dervied isomers (±)-6,30-epi-6 and (±)-6,30-epi-5. Finally, a convenient strategy for gram scale synthesis was developed utilizing diastereomer separation at a later stage in the synthesis that minimized the number of necessary synthetic operations to access all possible stereoisomers.R01 GM073855 - NIGMS NIH HHS; R24 GM111625 - NIGMS NIH HHS; R35 GM118173 - NIGMS NIH HH
A Comparison of Two Methods to Articulate a Maxillary Cast with Lateral Cephalometry
The Kois Dento-Facial Analyzer, an arbitrary articulation system, is used by clinicians to articulate and evaluate clinical cases. There is, however, limited information for understanding how the Kois Dento-Facial Analyzer should be utilized. Dr. Kois and Dr. Lee originally patented the device in 2003 yet there is essentially no evidence-based research in the literature. The purpose of this study was to evaluate the outcomes of articulating the maxillary cast using the Kois Dento-Facial Analyzer in three-dimensions as compared to the position of the cast when using Panadent’s Pana-Mount Facebow. Fifteen dried human skulls were used as test subjects. Maxillary diagnostic impressions were made on each skull as well as lateral cephalometric radiographs. Each diagnostic cast was articulated on a Panadent articulator according to the manufacturer’s instructions by means of the Kois Dento-Facial Analyzer as well as the Pana-Mount facebow. Standardized photographs of each articulation were then taken from a lateral view. From the cephalometric radiograph, key landmarks and measurements were made including the distance from the condylar center to the incisal edge and the occlusal plane angle relative to Frankfort Horizontal Plane. From the photographs taken of each articulation, the distance from the articular centers to the incisal edge position was measured, as was the occlusal plane angle relative to Frankfort Horizontal Plane. Finally, the three-dimensional position of each articulation was located and compared by means of the Panadent CPI III device. Statistical analysis was completed for the data collected. From this study, the following conclusions were made:
1. The Kois Dento-Facial Analyzer articulates the maxillary cast in a position that is not statistically different to the Pana-Mount facebow when comparing the incisal edge position and occlusal plane angle relative to Frankfort Horizontal.
2. Both the Kois Dento-Facial Analyzer and the Pana-Mount facebow locate the maxillary incisal edge position in a significantly different position compared to the skull.
3. Both the Kois Dento-Facial Analyzer and the Pana-Mount facebow produce occlusal plane angles that are not significantly different than the angle on the skull.
4. The three dimensional location of the maxillary cast varies approximately 8- 10 mm at the condyles
Comparison of The Kois Dento-Facial Analyzer System with an Earbow for Mounting a Maxillary Cast
Statement of problem: The Kois Dento-Facial Analyzer System (KDFA) is used by clinicians to mount maxillary casts and evaluate and treat patients. Limited information is available for understanding whether the KDFA should be considered as an alternative to an earbow.
Purpose: The purpose of this study was to evaluate maxillary casts mounted using the KDFA with casts mounted using Panadent\u27s Pana-Mount Facebow (PMF). Both articulation methods were compared against a lateral cephalometric radiograph.
Material and methods: Fifteen dried human skulls were used. Lateral cephalometric radiographs and 2 maxillary impressions were made of each skull. One cast from each skull was mounted on an articulator by means of the KDFA and the other by using the PMF. A standardized photograph of each articulation was made, and the distance from the articular center to the incisal edge position and the occlusal plane angle were measured. The distance from condylar center to the incisal edge and the occlusal plane angle were measured from cephalometric radiographs. Finally, the 3-dimensional position of each articulation was determined with a Panadent CPI-III. A randomized complete block design analysis of variance (RCBD) and post hoc tests (Tukey-Kramer HSD) (α=.05) were used to evaluate the occlusal plane angle and axis-central incisor distance. A paired 2-sample t test for means (α=.05) was used to compare the X, Y, and Z distance at the right and left condyle.
Results: The KDFA and PMF mounted the maxillary cast in a position that was not statistically different from the skull when comparing the occlusal plane angle (P=.165). Both the KDFA and the PMF located the maxillary central incisor edge position in a significantly different position compared with the skull (P=.001) but were not significantly different from each other. The 3-dimensional location of the maxillary casts varied at the condyles by approximately 9 to 10.3 mm.
Conclusion: The KDFA mounted the maxillary cast in a position that was not statistically different from the PMF when comparing the incisal edge position and the occlusal plane angle. Both the KDFA and the PMF located the maxillary incisal edge position in a significantly different position compared with the anatomic position on dried human skulls
Rapid Changes of Potassium Concentration at the Outer Surface of Exposed Single Neurons during Membrane Current Flow
K+-sensitive liquid ion-exchanger microelectrodes are shown to be capable of measuring concentration changes which occur on a millisecond time scale. However, some quaternary ammonium ions, such as tetraethylammonium and acetylcholine, are able to block electrode function when present in concentrations as low as 10-4 to 10-3 M. Changes in extracellular potassium concentration caused by spike activity or voltage clamp pulses of exposed single neurons of the snail Helix pomatia may be measured by these electrodes. Quantitative analysis shows that the total amount of excess potassium found in the vicinity of the cell a short time after a clamp pulse, is in relatively good agreement with the amount of potassium carried by the membrane current
TiB_2 and ZrB_2 diffusion barriers in GaAs Ohmic contact technology
The transition metal diboride compounds, ZrB_2 and TiB_2, interposed between Ni/Ge/Au Ohmic contact metallization on n‐type GaAs wafers and an overlying thick Au contact layer, have been investigated to evaluate their effectiveness in stabilizing the Ohmic contact by limiting the in‐diffusion of Au. All of the metal layers were e‐beam deposited except the ZrB_2 which was rf‐diode sputtered. The barrier layer thicknesses were 50 and 100 nm for the TiB_2 and the ZrB_2, respectively. Postdeposition alloying of the contacts was performed at 400, 425, or 450 °C. Auger electron spectroscopy depth profiling of the resultant Ohmic contacts demonstrates that the barrier layers effectively preclude penetration of Au to the Ohmic contact structure. Specific contact resistivities for such contacts are in the low 10^(−7) Ω cm^2 range; although some degradation of the contact resistivity is observed after long term annealing, the values of resistivities do not exceed 1.5×10^(−6) Ω cm^2 after 92 h at 350 °C
Veterinary Arsenicals
Feed medication and other forms of chemotherapy in our meat-producing animals have caused heated controversies. Some of this confusion is due to both a distortion of and a lack of information. Arsenicals are some of the oldest compounds whose use in agriculture has been questioned. An attempt will be made to trace the historical use of arsenicals and to discuss their metabolism and side effects from a veterinarian\u27s point of view
Determining orbits for the Milky Way's dwarfs
We calculate orbits for the Milky Way dwarf galaxies with proper motions, and compare these to subhalo orbits in a high-resolution cosmological simulation. We use the simulation data to assess how well orbits may be recovered in the face of measurement errors, a time-varying triaxial gravitational potential and satellite-satellite interactions. For present measurement uncertainties, we recover the apocentre ra and pericentre rp to ∼40 per cent. With improved data from the Gaia satellite we should be able to recover ra and rp to ∼14 per cent, respectively. However, recovering the 3D positions and orbital phase of satellites over several orbits is more challenging. This owes primarily to the non-sphericity of the potential and satellite interactions during group infall. Dynamical friction, satellite mass-loss and the mass evolution of the main halo play a more minor role in the uncertainties. We apply our technique to nine Milky Way dwarfs with observed proper motions. We show that their mean apocentre is lower than the mean of the most massive subhaloes in our cosmological simulation, but consistent with the most massive subhaloes that form before z= 10. This lends further support to the idea that the Milky Way's dwarfs formed before reionizatio
- …