Flow around a cube in a turbulent boundary layer: LES and experiment

We present a numerical simulation of flow around a surface mounted cube placed in a turbulent boundary layer which, although representing a typical wind environment, has been specifically tailored to match a series of wind tunnel observations. The simulations were carried out at a Reynolds number, based on the velocity U at the cube height h, of 20,000—large enough that many aspects of the flow are effectively Reynolds number independent. The turbulence intensity was about 18% at the cube height, and the integral length scale was about 0.8 times the cube height h. The Jenson number Je=h/z0, based on the approach flow roughness length z0, was 600, to match the wind tunnel situation. The computational mesh was uniform with a spacing of h/32, aiding rapid convergence of the multigrid solver, and the governing equations were discretised using second-order finite differences within a parallel multiblock environment. The results presented include detailed comparison between measurements and LES computations of both the inflow boundary layer and the flow field around the cube including mean and fluctuating surface pressures. It is concluded that provided properly formulated inflow and surface boundary conditions are used, LES is now a viable tool for use in wind engineering problems concerning flow over isolated bodies. In particular, both mean and fluctuating surface pressures can be obtained with a similar degree of uncertainty as usually associated with wind tunnel modelling

On Neutrino Masses and a Low Breaking Scale of Left-Right Symmetry

In left-right symmetric models (LRSM) the light neutrino masses arise from two sources: the seesaw mechanism and a VEV of an SU(2)$_L$ triplet. If the left-right symmetry breaking, $v_R$, is low, v_R\lsim15\TeV, the contributions to the light neutrino masses from both the seesaw mechanism and the triplet Yukawa couplings are expected to be well above the experimental bounds. We present a minimal LRSM with an additional U(1) symmetry in which the masses induced by the two sources are below the eV scale and the two-fold problem is solved. We further show that, if the U(1) symmetry is also responsible for the lepton flavor structure, the model yields a small mixing angle within the first two lepton generations.Comment: 18 pages references added published versio

Liberating Efimov physics from three dimensions

When two particles attract via a resonant short-range interaction, three particles always form an infinite tower of bound states characterized by a discrete scaling symmetry. It has been considered that this Efimov effect exists only in three dimensions. Here we review how the Efimov physics can be liberated from three dimensions by considering two-body and three-body interactions in mixed dimensions and four-body interaction in one dimension. In such new systems, intriguing phenomena appear, such as confinement-induced Efimov effect, Bose-Fermi crossover in Efimov spectrum, and formation of interlayer Efimov trimers. Some of them are observable in ultracold atom experiments and we believe that this study significantly broadens our horizons of universal Efimov physics.Comment: 17 pages, 5 figures, contribution to a special issue of Few-Body Systems devoted to Efimov Physic

A Systematic Analysis of the Lepton Polarization Asymmetries in the Rare B Decay, B -> X_s\tau^+\tau^-

The most general model-independent analysis of the lepton polarization asymmetries in the rare B decay, \Bstt, is presented. We present the longitudinal, normal and transverse polarization asymmetries for the $\tau^+$ and $\tau^-$, and combinations of them, as functions of the Wilson coefficients of twelve independent four-Fermi interactions, ten of them local and two nonlocal. These procedures will tell us which type of operators contributes to the process. And it will be very useful to pin down new physics systematically, once we have the experimental data with high statistics and a deviation from the Standard Model is found.Comment: 24 pages, 8 figures, LaTe

Lepton Masses and Mixing in a Left-Right Symmetric Model with a TeV-scale Gravity

We construct a left-right symmetric (LRS) model in five dimensions which accounts naturally for the lepton flavor parameters. The fifth dimension is described by an orbifold, S_1/Z_2 times Z'_2, with a typical size of order TeV^{-1}. The fundamental scale is of order 25 TeV which implies that the gauge hierarchy problem is ameliorated. In addition the LRS breaking scale is of order few TeV which implies that interactions beyond those of the standard model are accessible to near future experiments. Leptons of different representations are localized around different orbifold fixed points. This explains, through the Arkani-Hamed-Schmaltz mechanism, the smallness of the tau mass compared to the electroweak breaking scale. An additional U(1) horizontal symmetry, broken by small parameters, yields the hierarchy in the charged lepton masses, strong suppression of the light neutrino masses and accounts for the mixing parameters. The model yields several unique predictions. In particular, the branching ratio for the lepton flavor violating process mu^- --> e^+ e^- e^- is comparable with its present experimental sensitivity.Comment: 21 pages, 1 figure, references added, discussion on the predictiveness of the model in the generic non-universal case added, to appear in PR

Lepton Polarization and Forward-Backward Asymmetries in b -> s tau+ tau-

We study the spin polarizations of both tau leptons in the decay b -> s tau+ tau-. In addition to the polarization asymmetries involving a single tau, we construct asymmetries for the case where both polarizations are simultaneously measured. We also study forward-backward asymmetries with polarized tau's. We find that a large number of asymmetries are predicted to be large, >~ 10%. This permits the measurement of all Wilson coefficients and the b-quark mass, thus allowing the standard model (SM) to be exhaustively tested. Furthermore, there are many unique signals for the presence of new physics. For example, asymmetries involving triple-product correlations are predicted to be tiny within the SM, O(10^{-2}). Their observation would be a clear signal of new physics.Comment: 21 pages, LaTeX, 4 figures (included). Paper somewhat reorganized, references greatly expanded, conclusions unchange

Cosmological evolution of interacting dark energy in Lorentz violation

The cosmological evolution of an interacting scalar field model in which the scalar field interacts with dark matter, radiation, and baryon via Lorentz violation is investigated. We propose a model of interaction through the effective coupling $\bar{\beta}$. Using dynamical system analysis, we study the linear dynamics of an interacting model and show that the dynamics of critical points are completely controlled by two parameters. Some results can be mentioned as follows. Firstly, the sequence of radiation, the dark matter, and the scalar field dark energy exist and baryons are sub dominant. Secondly, the model also allows the possibility of having a universe in the phantom phase with constant potential. Thirdly, the effective gravitational constant varies with respect to time through $\bar{\beta}$. In particular, we consider a simple case where $\bar{\beta}$ has a quadratic form and has a good agreement with the modified $\Lambda$CDM and quintessence models. Finally, we also calculate the first post--Newtonian parameters for our model.Comment: 14 pages, published versio

Tensor completion in hierarchical tensor representations

Compressed sensing extends from the recovery of sparse vectors from undersampled measurements via efficient algorithms to the recovery of matrices of low rank from incomplete information. Here we consider a further extension to the reconstruction of tensors of low multi-linear rank in recently introduced hierarchical tensor formats from a small number of measurements. Hierarchical tensors are a flexible generalization of the well-known Tucker representation, which have the advantage that the number of degrees of freedom of a low rank tensor does not scale exponentially with the order of the tensor. While corresponding tensor decompositions can be computed efficiently via successive applications of (matrix) singular value decompositions, some important properties of the singular value decomposition do not extend from the matrix to the tensor case. This results in major computational and theoretical difficulties in designing and analyzing algorithms for low rank tensor recovery. For instance, a canonical analogue of the tensor nuclear norm is NP-hard to compute in general, which is in stark contrast to the matrix case. In this book chapter we consider versions of iterative hard thresholding schemes adapted to hierarchical tensor formats. A variant builds on methods from Riemannian optimization and uses a retraction mapping from the tangent space of the manifold of low rank tensors back to this manifold. We provide first partial convergence results based on a tensor version of the restricted isometry property (TRIP) of the measurement map. Moreover, an estimate of the number of measurements is provided that ensures the TRIP of a given tensor rank with high probability for Gaussian measurement maps.Comment: revised version, to be published in Compressed Sensing and Its Applications (edited by H. Boche, R. Calderbank, G. Kutyniok, J. Vybiral

Rare Charm Decays in the Standard Model and Beyond

We perform a comprehensive study of a number of rare charm decays, incorporating the first evaluation of the QCD corrections to the short distance contributions, as well as examining the long range effects. For processes mediated by the $c\to u\ell^+\ell^-$ transitions, we show that sensitivity to short distance physics exists in kinematic regions away from the vector meson resonances that dominate the total rate. In particular, we find that $D\to\pi\ell^+\ell^-$ and $D\to\rho\ell^+\ell^-$ are sensitive to non-universal soft-breaking effects in the Minimal Supersymmetric Standard Model with R-parity conservation. We separately study the sensitivity of these modes to R-parity violating effects and derive new bounds on R-parity violating couplings. We also obtain predictions for these decays within extensions of the Standard Model, including extensions of the Higgs, gauge and fermion sectors, as well as models of dynamical electroweak symmetry breaking.Comment: 45 pages, typos fixed, discussions adde

Effect of Grain Boundary Character Distribution on the Impact Toughness of 410NiMo Weld Metal

Grain boundary character distributions in 410NiMo weld metal were studied in the as-welded, first-stage, and second-stage postweld heat treatment (PWHT) conditions, and these were correlated with the Charpy-V impact toughness values of the material. The high impact toughness values in the weld metal in the as-welded and first-stage PWHT conditions compared to that in the second-stage condition are attributed to the higher fraction of low-energy I pound boundaries. A higher volume fraction of retained austenite and coarser martensite after second-stage PWHT accompanied by the formation of the ideal cube component in the 2-hour heat-treated specimen led to a reduction in the toughness value. A subsequent increase in the PWHT duration at 873 K (600 A degrees C) enhanced the formation of {111}aOE (c) 112 >, which impedes the adverse effect of the cubic component, resulting in an increase in the impact toughness. In addition to this, grain refinement during 4-hour PWHT in the second stage also increased the toughness of the weld metal