44,643 research outputs found
Recommended from our members
An investigation of nanoindentation tests on the single crystal copper thin film via an AFM and MD simulation
Nanoindentation tests performed in an atomic force microscope have been utilized to directly measure the mechanical properties of single crystal metal thin films fabricated by the vacuum vapor deposition technique. Nanoindentation tests were conducted at various indentation depths to study the effect of indentation depths on the mechanical properties of thin films. The results were interpreted by using the Oliver-Pharr method with which direct observation and measurement of the contact area are not required. The elastic modulus of the single crystal copper film at various indentation depths was determined as 67.0±6.9GPa on average which is in reasonable agreement with the results reported by others. The indentation hardness constantly increases with decreasing indentation depth, indicating a strong size effect. In addition to the experimental work, a three-dimensional nanoindentation model of molecular dynamics (MD) simulations with embedded atom method (EAM) potential is proposed to elucidate the mechanics and mechanisms of nanoindentation of thin films from the atomistic point of view. MD simulations results also show that due to the size effect the plastic deformation via amorphous transformation is more favorable than via the generation and propagation of dislocations in nanoindentation of single crystal copper thin films
Non-leptonic two-body weak decays of
We study the non-leptonic two-body weak decays of with () representing as the baryon (meson) states. Based
on the flavor symmetry, we can describe most of the data reexamined by
the BESIII Collaboration with higher precisions. However, our result of is larger than the
current experimental limit of (90\% C.L.) by BESIII. In
addition, we find that , , and , which are accessible
to the BESIII experiments.Comment: 12 pages, 1 figure, revised version accepted by PL
Bidirectional optimization of the melting spinning process
This is the author's accepted manuscript (under the provisional title "Bi-directional optimization of the melting spinning process with an immune-enhanced neural network"). The final published article is available from the link below. Copyright 2014 @ IEEE.A bidirectional optimizing approach for the melting spinning process based on an immune-enhanced neural network is proposed. The proposed bidirectional model can not only reveal the internal nonlinear relationship between the process configuration and the quality indices of the fibers as final product, but also provide a tool for engineers to develop new fiber products with expected quality specifications. A neural network is taken as the basis for the bidirectional model, and an immune component is introduced to enlarge the searching scope of the solution field so that the neural network has a larger possibility to find the appropriate and reasonable solution, and the error of prediction can therefore be eliminated. The proposed intelligent model can also help to determine what kind of process configuration should be made in order to produce satisfactory fiber products. To make the proposed model practical to the manufacturing, a software platform is developed. Simulation results show that the proposed model can eliminate the approximation error raised by the neural network-based optimizing model, which is due to the extension of focusing scope by the artificial immune mechanism. Meanwhile, the proposed model with the corresponding software can conduct optimization in two directions, namely, the process optimization and category development, and the corresponding results outperform those with an ordinary neural network-based intelligent model. It is also proved that the proposed model has the potential to act as a valuable tool from which the engineers and decision makers of the spinning process could benefit.National Nature Science Foundation of China, Ministry of Education of China, the Shanghai Committee of Science and Technology), and the Fundamental Research Funds for the Central Universities
Spin Polarisability of the Nucleon in the Heavy Baryon Effective Field Theory
We have constructed a heavy baryon effective field theory with photon as an
external field in accordance with the symmetry requirements similar to the
heavy quark effective field theory. By treating the heavy baryon and
anti-baryon equally on the same footing in the effective field theory, we have
calculated the spin polarisabilities of the nucleon at
third order and at fourth-order of the spin-dependent Compton scattering. At
leading order (LO), our results agree with the corresponding results of the
heavy baryon chiral perturbation theory, at the next-to-leading order(NLO) the
results show a large correction to the ones in the heavy baryon chiral
perturbation theory due to baryon-antibaryon coupling terms. The low energy
theorem is satisfied both at LO and at NLO. The contributions arising from the
heavy baryon-antibaryon vertex were found to be significant and the results of
the polarisabilities obtained from our theory is much closer to the
experimental data.Comment: 21pages, title changed, minimal correction
All Maximal Independent Sets and Dynamic Dominance for Sparse Graphs
We describe algorithms, based on Avis and Fukuda's reverse search paradigm,
for listing all maximal independent sets in a sparse graph in polynomial time
and delay per output. For bounded degree graphs, our algorithms take constant
time per set generated; for minor-closed graph families, the time is O(n) per
set, and for more general sparse graph families we achieve subquadratic time
per set. We also describe new data structures for maintaining a dynamic vertex
set S in a sparse or minor-closed graph family, and querying the number of
vertices not dominated by S; for minor-closed graph families the time per
update is constant, while it is sublinear for any sparse graph family. We can
also maintain a dynamic vertex set in an arbitrary m-edge graph and test the
independence of the maintained set in time O(sqrt m) per update. We use the
domination data structures as part of our enumeration algorithms.Comment: 10 page
Rayleigh-Brillouin light scattering spectroscopy of nitrous oxide (NO)
High signal-to-noise and high-resolution light scattering spectra are
measured for nitrous oxide (NO) gas at an incident wavelength of 403.00 nm,
at 90 scattering, at room temperature and at gas pressures in the range
bar. The resulting Rayleigh-Brillouin light scattering spectra are
compared to a number of models describing in an approximate manner the
collisional dynamics and energy transfer in this gaseous medium of this
polyatomic molecular species. The Tenti-S6 model, based on macroscopic gas
transport coefficients, reproduces the scattering profiles in the entire
pressure range at less than 2\% deviation at a similar level as does the
alternative kinetic Grad's 6-moment model, which is based on the internal
collisional relaxation as a decisive parameter. A hydrodynamic model fails to
reproduce experimental spectra for the low pressures of 0.5-1 bar, but yields
very good agreement (\%) in the pressure range bar. While these
three models have a different physical basis the internal molecular relaxation
derived can for all three be described in terms of a bulk viscosity of Pas. A 'rough-sphere' model, previously
shown to be effective to describe light scattering in SF gas, is not found
to be suitable, likely in view of the non-sphericity and asymmetry of the N-N-O
structured linear polyatomic molecule
Measurements of poloidal rotation velocity using charge exchange spectroscopy in a large helical device
Absolute measurements of poloidal rotation velocity with the accuracy up to 1 km/s (2 pm in wavelength) were done using charge exchange spectroscopy in a large helical device. Radial profiles of the absolute Doppler shift of charge exchange emission with a beam are obtained from spectra measured with four sets of optical fiber arrays that view downward and upward at the poloidal cross section with and without neutral beam injection. By arranging the optical fiber from four arrays close to each other at the entrance slit, the apparent Doppler shift due to aberrations of the spectrometer and due to interference of the cold component (the charge exchange between He-like oxygen and thermal neutrals 8 pm from the charge exchange emission with a beam) can be eliminated from the measurements. The measured poloidal rotation velocity is 1 3 km/s in the electron diamagnetic direction at half of the plasma minor radius
Environment, morphology and stellar populations of bulgeless low surface brightness galaxies
Based on the Sloan Digital Sky Survey DR 7, we investigate the environment,
morphology and stellar population of bulgeless low surface brightness (LSB)
galaxies in a volume-limited sample with redshift ranging from 0.024 to 0.04
and . The local density parameter is used to
trace their environments. We find that, for bulgeless galaxies, the surface
brightness does not depend on the environment. The stellar populations are
compared for bulgeless LSB galaxies in different environments and for bulgeless
LSB galaxies with different morphologies. The stellar populations of LSB
galaxies in low density regions are similar to those of LSB galaxies in high
density regions. Irregular LSB galaxies have more young stars and are more
metal-poor than regular LSB galaxies. These results suggest that the evolution
of LSB galaxies may be driven by their dynamics including mergers rather than
by their large scale environment.Comment: 12 pages, 13 figures, Accepted by A&
- …