66 research outputs found

    Diagnostic performance of FibroTest, SteatoTest and ActiTest in patients with NAFLD using the SAF score as histological reference

    Get PDF
    BACKGROUND: Blood tests of liver injury are less well validated in non‐alcoholic fatty liver disease (NAFLD) than in patients with chronic viral hepatitis. AIMS: To improve the validation of three blood tests used in NAFLD patients, FibroTest for fibrosis staging, SteatoTest for steatosis grading and ActiTest for inflammation activity grading. METHODS: We pre‐included new NAFLD patients with biopsy and blood tests from a single‐centre cohort (FibroFrance) and from the multicentre FLIP consortium. Contemporaneous biopsies were blindly assessed using the new steatosis, activity and fibrosis (SAF) score, which provides a reliable and reproducible diagnosis and grading/staging of the three elementary features of NAFLD (steatosis, inflammatory activity) and fibrosis with reduced interobserver variability. We used nonbinary‐ROC (NonBinAUROC) as the main endpoint to prevent spectrum effect and multiple testing. RESULTS: A total of 600 patients with reliable tests and biopsies were included. The mean NonBinAUROCs (95% CI) of tests were all significant (P < 0.0001): 0.878 (0.864–0.892) for FibroTest and fibrosis stages, 0.846 (0.830–0.862) for ActiTest and activity grades, and 0.822 (0.804–0.840) for SteatoTest and steatosis grades. FibroTest had a higher NonBinAUROC than BARD (0.836; 0.820–0.852; P = 0.0001), FIB4 (0.845; 0.829–0.861; P = 0.007) but not significantly different than the NAFLD score (0.866; 0.850–0.882; P = 0.26). FibroTest had a significant difference in median values between adjacent stage F2 and stage F1 contrarily to BARD, FIB4 and NAFLD scores (Bonferroni test P < 0.05). CONCLUSIONS: In patients with NAFLD, SteatoTest, ActiTest and FibroTest are non‐invasive tests that offer an alternative to biopsy, and they correlate with the simple grading/staging of the SAF scoring system across the three elementary features of NAFLD: steatosis, inflammatory activity and fibrosis

    Measurement of the W mass in e+e−e^+ e^- collisions at 183 GeV

    No full text
    The mass of the W boson is obtained from reconstructed invariant mass distributions in W-pair events. The sample of W pairs is selected from 57 pb−1^{-1} collected with the ALEPH detector in 1997 at a centre-of-mass energy of 183 GeV. The invariant mass distributions of reweighted Monte Carlo events are fitted separately to the experimental distributions in the qqbarqqbarqqbarqqbar and all l\nuqqbar channels to give the following W masses: mWhadronic=80.461±0.177(stat.)±0.045(syst.)±0.056(theory)GeV/c2m_{W}^{hadronic} = 80.461 \pm 0.177(stat.) \pm 0.045(syst.) \pm 0.056(theory) GeV/c^2, mWsemileptonic=80.326±0.184(stat.)±0.040(syst.)GeV/c2m_{W}^{semileptonic} = 80.326 \pm 0.184(stat.) \pm 0.040(syst.) GeV/c^2 where the theory error represents the possible effects of final state interactions. The combination of these two measurements, including the LEP energy calibration uncertainty, gives $m_{W} = 80.393 \pm 0.128(stat.)\pm 0.041(syst.) \pm 0.028(theory)\pm 0.021(LEP) GeV/c^2

    Measurement of the W-pair cross section in e+e−e^+ e^- collisions at 172 GeV

    Get PDF
    The e+e- --> W+W- cross section is measured in a data sample collected by ALEPH at a mean centre--of--mass energy of 172.09 GEV, corresponding to an integrated luminosity of 10.65 pb-1. Cross sections are given for the three topologies, fully leptonic, semi-leptonic and hadronic of a W-pair decay. Under the assumption that no other decay modes are present, the W-pair cross section is measured to be 11.7 +- 1.2 (stat.) +- 0.3 (syst.) pb. The existence of the triple gauge boson vertex of the Standard Model is clearly preferred by the data. The decay branching ratio of the W boson into hadrons is measured to be B(W --> hadrons) = 67.7 +- 3.1 (stat.) +- 0.7 (syst.)%, allowing a determination of the CKM matrix element |Vcs|= 0.98 +- 0.14 (stat.) +- 0.03 (syst.)

    Measurement of the tau lepton lifetime with the three-dimensional impact parameter method.

    No full text
    A new method is presented for the measurement of the mean τ\tau lepton lifetime using events in which τ\tau's are pair-produced and both τ\tau's decay to hadrons and Μτ\nu_\tau. Based on the correlation between the two τ\tau's produced at a symmetric e+e−e^+ e^- collider, the 3DIP method relies on the three-dimensional information from a double-sided vertex detector and on kinematic constraints for the precise measurement of the τ\tau decay angles. Using the data collected from 1992 to 1994 with the ALEPH detector at LEP, a τ\tau lifetime of 288.0±3.1±1.3288.0 \pm 3.1 \pm 1.3 \fs is obtained from the sample in which both τ\tau's decay to one charged track, and 292.8±5.6±3.0292.8 \pm 5.6 \pm 3.0 \fs from the sample in which one τ\tau decays to one prong and the other to three prongs. The results show small statistical correlations with those derived from other methods. When combined with the previously published ALEPH measurements, the resulting τ\tau lifetime is 291.2±2.0±1.2291.2 \pm 2.0 \pm 1.2 \fs

    A study of single and multi-photon production in e+e−e^+e^- collisions at centre-of mass energies of 130 and 136 GeV

    Get PDF

    Measurement of the tau lepton lifetime with the three-dimensional impact parameter method.

    Get PDF
    A new method is presented for the measurement of the mean τ\tau lepton lifetime using events in which τ\tau's are pair-produced and both τ\tau's decay to hadrons and Μτ\nu_\tau. Based on the correlation between the two τ\tau's produced at a symmetric e+e−e^+ e^- collider, the 3DIP method relies on the three-dimensional information from a double-sided vertex detector and on kinematic constraints for the precise measurement of the τ\tau decay angles. Using the data collected from 1992 to 1994 with the ALEPH detector at LEP, a τ\tau lifetime of 288.0±3.1±1.3288.0 \pm 3.1 \pm 1.3 \fs is obtained from the sample in which both τ\tau's decay to one charged track, and 292.8±5.6±3.0292.8 \pm 5.6 \pm 3.0 \fs from the sample in which one τ\tau decays to one prong and the other to three prongs. The results show small statistical correlations with those derived from other methods. When combined with the previously published ALEPH measurements, the resulting τ\tau lifetime is 291.2±2.0±1.2291.2 \pm 2.0 \pm 1.2 \fs

    Measurement of the tau lepton lifetime with the three-dimensional impact parameter method.

    Get PDF
    A new method is presented for the measurement of the mean τ\tau lepton lifetime using events in which τ\tau's are pair-produced and both τ\tau's decay to hadrons and Μτ\nu_\tau. Based on the correlation between the two τ\tau's produced at a symmetric e+e−e^+ e^- collider, the 3DIP method relies on the three-dimensional information from a double-sided vertex detector and on kinematic constraints for the precise measurement of the τ\tau decay angles. Using the data collected from 1992 to 1994 with the ALEPH detector at LEP, a τ\tau lifetime of 288.0±3.1±1.3288.0 \pm 3.1 \pm 1.3 \fs is obtained from the sample in which both τ\tau's decay to one charged track, and 292.8±5.6±3.0292.8 \pm 5.6 \pm 3.0 \fs from the sample in which one τ\tau decays to one prong and the other to three prongs. The results show small statistical correlations with those derived from other methods. When combined with the previously published ALEPH measurements, the resulting τ\tau lifetime is 291.2±2.0±1.2291.2 \pm 2.0 \pm 1.2 \fs

    Measurement of the tau lepton lifetime with the three-dimensional impact parameter method.

    No full text
    A new method is presented for the measurement of the mean τ\tau lepton lifetime using events in which τ\tau's are pair-produced and both τ\tau's decay to hadrons and Μτ\nu_\tau. Based on the correlation between the two τ\tau's produced at a symmetric e+e−e^+ e^- collider, the 3DIP method relies on the three-dimensional information from a double-sided vertex detector and on kinematic constraints for the precise measurement of the τ\tau decay angles. Using the data collected from 1992 to 1994 with the ALEPH detector at LEP, a τ\tau lifetime of 288.0±3.1±1.3288.0 \pm 3.1 \pm 1.3 \fs is obtained from the sample in which both τ\tau's decay to one charged track, and 292.8±5.6±3.0292.8 \pm 5.6 \pm 3.0 \fs from the sample in which one τ\tau decays to one prong and the other to three prongs. The results show small statistical correlations with those derived from other methods. When combined with the previously published ALEPH measurements, the resulting τ\tau lifetime is 291.2±2.0±1.2291.2 \pm 2.0 \pm 1.2 \fs

    Measurement of the tau lepton lifetime with the three-dimensional impact parameter method.

    Get PDF
    A new method is presented for the measurement of the mean τ\tau lepton lifetime using events in which τ\tau's are pair-produced and both τ\tau's decay to hadrons and Μτ\nu_\tau. Based on the correlation between the two τ\tau's produced at a symmetric e+e−e^+ e^- collider, the 3DIP method relies on the three-dimensional information from a double-sided vertex detector and on kinematic constraints for the precise measurement of the τ\tau decay angles. Using the data collected from 1992 to 1994 with the ALEPH detector at LEP, a τ\tau lifetime of 288.0±3.1±1.3288.0 \pm 3.1 \pm 1.3 \fs is obtained from the sample in which both τ\tau's decay to one charged track, and 292.8±5.6±3.0292.8 \pm 5.6 \pm 3.0 \fs from the sample in which one τ\tau decays to one prong and the other to three prongs. The results show small statistical correlations with those derived from other methods. When combined with the previously published ALEPH measurements, the resulting τ\tau lifetime is 291.2±2.0±1.2291.2 \pm 2.0 \pm 1.2 \fs

    Measurement of the tau lepton lifetime with the three-dimensional impact parameter method.

    No full text
    A new method is presented for the measurement of the mean τ\tau lepton lifetime using events in which τ\tau's are pair-produced and both τ\tau's decay to hadrons and Μτ\nu_\tau. Based on the correlation between the two τ\tau's produced at a symmetric e+e−e^+ e^- collider, the 3DIP method relies on the three-dimensional information from a double-sided vertex detector and on kinematic constraints for the precise measurement of the τ\tau decay angles. Using the data collected from 1992 to 1994 with the ALEPH detector at LEP, a τ\tau lifetime of 288.0±3.1±1.3288.0 \pm 3.1 \pm 1.3 \fs is obtained from the sample in which both τ\tau's decay to one charged track, and 292.8±5.6±3.0292.8 \pm 5.6 \pm 3.0 \fs from the sample in which one τ\tau decays to one prong and the other to three prongs. The results show small statistical correlations with those derived from other methods. When combined with the previously published ALEPH measurements, the resulting τ\tau lifetime is 291.2±2.0±1.2291.2 \pm 2.0 \pm 1.2 \fs
    • 

    corecore