Ground effects on V/STOL and STOL aircraft: A survey

The flow fields encountered by jet- and fan-powered Vertical/Short Takeoff and Landing (V/STOL) aircraft operating in ground effect are reviewed and their general effects on the aerodynamic characteristics are discussed. The ground effects considered include: (1) the suckdown experienced by a single jet configuration in hover; (2) the fountain flow and additional suckdown experienced by multiple jet configurations in hover; (3) the ground vortex generated by jet and jet flap configurations in short takeoff and landing (STOL) operation and the associated aerodynamic and hot-gas-ingestion effects; and (4) the change in the downwash at the tail due to ground proximity. After over 30 years of research on V/STOL aircraft, the general flow phenomena are well-known and, in most areas, the effects of ground proximity can be established or can be determined experimentally. However, there are some anomalies in the current data base which are discussed

Explaining Violation Traces with Finite State Natural Language Generation Models

An essential element of any verification technique is that of identifying and communicating to the user, system behaviour which leads to a deviation from the expected behaviour. Such behaviours are typically made available as long traces of system actions which would benefit from a natural language explanation of the trace and especially in the context of business logic level specifications. In this paper we present a natural language generation model which can be used to explain such traces. A key idea is that the explanation language is a CNL that is, formally speaking, regular language susceptible transformations that can be expressed with finite state machinery. At the same time it admits various forms of abstraction and simplification which contribute to the naturalness of explanations that are communicated to the user

Low-speed Wind-Tunnel Study of Reaction Control-jet Effectiveness for Hover and Transition of a STOVL Fighter Concept

A brief wind-tunnel study was conducted in the Langley 12-Foot Low-Speed Tunnel to determine reaction control-jet effectiveness and some associated aerodynamic characteristics of a 15 percent scale model of the General Dynamics E-7A STOVL fighter/attack aircraft concept applicable to hover and transition flight. Tests were made with the model at various attitude angles in the tunnel test section and at various tunnel airspeeds for a range of control-jet nozzle pressure ratios. Eight reaction control-jets were tested individually. Four jets were at the design baseline locations providing roll, pitch, and yaw control. Comparisons of measured data with values calculated using empirical methods were made where possible

V/STOL and STOL ground effects and testing techniques

The ground effects associated with V/STOL operation were examined and an effort was made to develop the equipment and testing techniques needed for that understanding. Primary emphasis was on future experimental programs in the 40 x 80 and the 80 x 120 foot test sections and in the outdoor static test stand associated with these facilities. The commonly used experimental techniques are reviewed and data obtained by various techniques are compared with each other and with available estimating methods. These reviews and comparisons provide insight into the limitations of past studies and the testing techniques used and identify areas where additional work is needed. The understanding of the flow mechanics involved in hovering and in transition in and out of ground effect is discussed. The basic flow fields associated with hovering, transition and STOL operation of jet powered V/STOL aircraft are depicted

Forces and pressures induced on circular plates by a single lifting jet in ground effect

NASA Ames is conducting a program to develop improved methods for predicting suckdown and hot-gas ingestion on jet V/STOL aircraft when they are in ground effect. As part of that program a data base is being created that provides a systematic variation of parameters so that current empirical prediction procedures can be modified. The first series of tests in this program is complete. This report is one of three that presents the data obtained from tests conducted at Lockheed Aeronautical Systems - Rye Canyon Facility and the High Bay area of the 40 by 80 foot Wind Tunnel at Ames Research Center. Suckdown on two circular plates is examined

Suckdown, fountain lift, and pressures induced on several tandem jet V/STOL configurations

As part of a program to improve the methods for predicting the suckdown and hot gas ingestion for jet V/STOL aircraft in ground effect, a data base is being created that provides a systematic variation of parameters so that a new empirical prediction procedure can be developed. The first series of tests in this program was completed. Suckdown, fountain lift, and pressures induced on several two-jet V/STOL configurations are described. It is one of three reports that present the data obtained from tests conducted at Lockheed Aeronautical Systems-Rye Canyon Facility and in the High Bay area of the 40 by 80 foot wind tunnel complex at NASA Ames Research Center

Control in the technical societies: a brief history

By the time control engineering emerged as a coherent body of knowledge and practice (during and just after WW2) professional engineering societies had existed for many decades. Since control engineering is an interdisciplinary branch of the profession, new sections devoted to control were quickly established within the various existing technical societies. In addition, some new bodies devoted specifically or primarily to control were established. This article, a revised version of a paper presented at the IEEE 2009 Conference on the History of Technical Societies, describes how control engineering as a distinct branch of engineering became represented in technical societies in a number of countries

Strict polynomial functors and coherent functors

We build an explicit link between coherent functors in the sense of Auslander and strict polynomial functors in the sense of Friedlander and Suslin. Applications to functor cohomology are discussed.Comment: published version, 24 pages. Section 2.7 reorganized, and notational distinction between left and right tensor product reinstalle