183 research outputs found
Intensity limits of the PSI Injector II cyclotron
We investigate limits on the current of the PSI Injector II high intensity
separate-sector isochronous cyclotron, in its present configuration and after a
proposed upgrade. Accelerator Driven Subcritical Reactors, neutron and neutrino
experiments, and medical isotope production all benefit from increases in
current, even at the ~ 10% level: the PSI cyclotrons provide relevant
experience. As space charge dominates at low beam energy, the injector is
critical. Understanding space charge effects and halo formation through
detailed numerical modelling gives clues on how to maximise the extracted
current. Simulation of a space-charge dominated low energy high intensity (9.5
mA DC) machine, with a complex collimator set up in the central region shaping
the bunch, is not trivial. We use the OPAL code, a tool for charged-particle
optics calculations in large accelerator structures and beam lines, including
3D space charge. We have a precise model of the present production) Injector
II, operating at 2.2 mA current. A simple model of the proposed future
(upgraded) configuration of the cyclotron is also investigated.
We estimate intensity limits based on the developed models, supported by
fitted scaling laws and measurements. We have been able to perform more
detailed analysis of the bunch parameters and halo development than any
previous study. Optimisation techniques enable better matching of the
simulation set-up with Injector II parameters and measurements. We show that in
the production configuration the beam current scales to the power of three with
the beam size. However, at higher intensities, 4th power scaling is a better
fit, setting the limit of approximately 3 mA. Currents of over 5 mA, higher
than have been achieved to date, can be produced if the collimation scheme is
adjusted
Ab initio study of electronic and magnetic structure and structural phase transition of (Fe 1-xMn x) 2P 1-yGe y alloys
The paper presents results of the ab initio electronic structure calculations performed for the
(Fe0:5Mn0:5)2P0:67Ge0:33 alloy, a member of (Fe1xMnx)2P1yGey family of alloys showing a giant magnetocaloric e ffect. Calculations con rmed the strong relationship between the magnetic state and crystal structure of the alloy. To investigate the isostructural phase transition driven by external magnetic eld observed in
(Fe0:9Mn1:1)P0:8Ge0:2 we utilized the xed spin moment approach. Total energy analysis con rmed the occurrence of isostructural phase transition
A Parallel General Purpose Multi-Objective Optimization Framework, with Application to Beam Dynamics
Particle accelerators are invaluable tools for research in the basic and
applied sciences, in fields such as materials science, chemistry, the
biosciences, particle physics, nuclear physics and medicine. The design,
commissioning, and operation of accelerator facilities is a non-trivial task,
due to the large number of control parameters and the complex interplay of
several conflicting design goals. We propose to tackle this problem by means of
multi-objective optimization algorithms which also facilitate a parallel
deployment. In order to compute solutions in a meaningful time frame a fast and
scalable software framework is required. In this paper, we present the
implementation of such a general-purpose framework for simulation-based
multi-objective optimization methods that allows the automatic investigation of
optimal sets of machine parameters. The implementation is based on a
master/slave paradigm, employing several masters that govern a set of slaves
executing simulations and performing optimization tasks. Using evolutionary
algorithms as the optimizer and OPAL as the forward solver, validation
experiments and results of multi-objective optimization problems in the domain
of beam dynamics are presented. The high charge beam line at the Argonne
Wakefield Accelerator Facility was used as the beam dynamics model. The 3D beam
size, transverse momentum, and energy spread were optimized
High Power Cyclotrons for the Neutrino Experiments DAEÎŽALUS and IsoDAR
DAEÎŽALUS (Decay At rest Experiment for ÎŽcp At a Laboratory for Underground Science) has been proposed to measure the value of the CP violating phase delta through the oscillation of low energy muon anti-neutrinos to electron antineutrinos. With a single large detector, three accelerators at different distances enable the oscillation to be measured with sufficient accuracy. We have proposed the superconducting multi-megawatt DAEÎŽALUS Supercinducting Ring Cyclotron (DSRC) as the means of producing the 800 MeV 12 mA protons required, through the acceleration of H2+, ions with highly efficient stripping extraction. The DSRC comprises twin ion sources and injector cyclotrons, followed by a booster. The injector cyclotron can also be used for a separate experiment, IsoDAR (Isotope Decay At Rest) in which low energy protons produce Lithium 8, and thus a very pure electron antineutrino source which can be used to measure, or rule out, short range oscillation to a sterile neutrino. We describe recent developments in the designs of the injector and the booster, and the prospects for the two experiments
A Chromosome-Scale Assembly of the Garden Orach (Atriplex hortensis L.) Genome Using Oxford Nanopore Sequencing
Atriplex hortensis (2n = 2x = 18, 1C genome size 1.1 gigabases), also known
as garden orach and mountain-spinach, is a highly nutritious, broadleaf annual of
the Amaranthaceae-Chenopodiaceae alliance (Chenopodiaceae sensu stricto, subfam.
Chenopodioideae) that has spread in cultivation from its native primary domestication
area in Eurasia to other temperate and subtropical regions worldwide. Atriplex L. is a
highly complex but, as understood now, a monophyletic group of mainly halophytic
and/or xerophytic plants, of which A. hortensis has been a vegetable of minor
importance in some areas of Eurasia (from Central Asia to the Mediterranean) at least
since antiquity. Nonetheless, it is a crop with tremendous nutritional potential due
primarily to its exceptional leaf and seed protein quantities (approaching 30%) and
quality (high levels of lysine). Although there is some literature describing the taxonomy
and production of A. hortensis, there is a general lack of genetic and genomic data
that would otherwise help elucidate the genetic variation, phylogenetic positioning, and
future potential of the species. Here, we report the assembly of the first high-quality,
chromosome-scale reference genome for A. hortensis cv. âGolden.â Long-read data
from Oxford Nanoporeâs MinION DNA sequencer was assembled with the program
Canu and polished with Illumina short reads. Contigs were scaffolded to chromosome
scale using chromatin-proximity maps (Hi-C) yielding a final assembly containing 1,325
scaffolds with a N50 of 98.9 Mb â with 94.7% of the assembly represented in the nine
largest, chromosome-scale scaffolds. Sixty-six percent of the genome was classified
as highly repetitive DNA, with the most common repetitive elements being Gypsy-
(32%) and Copia-like (11%) long-terminal repeats. The annotation was completed using
MAKER which identified 37,083 gene models and 2,555 tRNA genes. Completeness of the genome, assessed using the Benchmarking Universal Single Copy Orthologs
(BUSCO) metric, identified 97.5% of the conserved orthologs as complete, with only
2.2% being duplicated, reflecting the diploid nature of A. hortensis. A resequencing
panel of 21 wild, unimproved and cultivated A. hortensis accessions revealed three
distinct populations with little variation within subpopulations. These resources provide
vital information to better understand A. hortensis and facilitate future study
The conceptual design of CLARA, a novel fel test facility for ultra-short pulse generation
CLARA will be a novel FEL test facility focussed on the generation of ultra-short photon pulses with extreme levels of stability and synchronisation. The principal aim is to experimentally demonstrate that sub-cooperation length pulse generation with FELs is viable, and to compare the various schemes being championed. The results will translate directly to existing and future X-ray FELs, enabling them to generate attosecond pulses, thereby extending their science capabilities. This paper gives an overview of the motivation for CLARA, describes the facility design (reported in detail in the recently published Conceptual Design Report [1]) and proposed operating modes and summarises the proposed areas of FEL research
HE-LHC: The High-Energy Large Hadron Collider â Future Circular Collider Conceptual Design Report Volume 4
In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered an energy-frontier hadron collider (FCC-hh), a highest-luminosity high-energy lepton collider (FCC-ee), the corresponding 100 km tunnel infrastructure, as well as the physics opportunities of these two colliders, and a high-energy LHC, based on FCC-hh technology. This document constitutes the third volume of the FCC Conceptual Design Report, devoted to the hadron collider FCC-hh. It summarizes the FCC-hh physics discovery opportunities, presents the FCC-hh accelerator design, performance reach, and staged operation plan, discusses the underlying technologies, the civil engineering and technical infrastructure, and also sketches a possible implementation. Combining ingredients from the Large Hadron Collider (LHC), the high-luminosity LHC upgrade and adding novel technologies and approaches, the FCC-hh design aims at significantly extending the energy frontier to 100 TeV. Its unprecedented centre-of-mass collision energy will make the FCC-hh a unique instrument to explore physics beyond the Standard Model, offering great direct sensitivity to new physics and discoveries
- âŠ