9 research outputs found

    Identification of Disease Resistance Parents and Genome-Wide Association Mapping of Resistance in Spring Wheat

    Get PDF
    The likelihood of success in developing modern cultivars depend on multiple factors, including the identification of suitable parents to initiate new crosses, and characterizations of genomic regions associated with target traits. The objectives of the present study were to (a) determine the best economic weights of four major wheat diseases (leaf spot, common bunt, leaf rust, and stripe rust) and grain yield for multi-trait restrictive linear phenotypic selection index (RLPSI), (b) select the top 10% cultivars and lines (hereafter referred as genotypes) with better resistance to combinations of the four diseases and acceptable grain yield as potential parents, and (c) map genomic regions associated with resistance to each disease using genome-wide association study (GWAS). A diversity panel of 196 spring wheat genotypes was evaluated for their reaction to stripe rust at eight environments, leaf rust at four environments, leaf spot at three environments, common bunt at two environments, and grain yield at five environments. The panel was genotyped with the Wheat 90K SNP array and a few KASP SNPs of which we used 23,342 markers for statistical analyses. The RLPSI analysis performed by restricting the expected genetic gain for yield displayed significant (p \u3c 0.05) differences among the 3125 economic weights. Using the best four economic weights, a subset of 22 of the 196 genotypes were selected as potential parents with resistance to the four diseases and acceptable grain yield. GWAS identified 37 genomic regions, which included 12 for common bunt, 13 for leaf rust, 5 for stripe rust, and 7 for leaf spot. Each genomic region explained from 6.6 to 16.9% and together accounted for 39.4% of the stripe rust, 49.1% of the leaf spot, 94.0% of the leaf rust, and 97.9% of the common bunt phenotypic variance combined across all environments. Results from this study provide valuable information for wheat breeders selecting parental combinations for new crosses to develop improved germplasm with enhanced resistance to the four diseases as well as the physical positions of genomic regions that confer resistance, which facilitates direct comparisons for independent mapping studies in the future

    Identification of Fusarium head blight sources of resistance and associated QTLs in historical and modern Canadian spring wheat

    Get PDF
    Fusarium head blight (FHB) is one the most globally destructive fungal diseases in wheat and other small grains, causing a reduction in grain yield by 10–70%. The present study was conducted in a panel of historical and modern Canadian spring wheat (Triticum aestivum L.) varieties and lines to identify new sources of FHB resistance and map associated quantitative trait loci (QTLs). We evaluated 249 varieties and lines for reaction to disease incidence, severity, and visual rating index (VRI) in seven environments by artificially spraying a mixture of four Fusarium graminearum isolates. A subset of 198 them were genotyped with the Wheat 90K iSelect single nucleotide polymorphisms (SNPs) array. Genome-wide association mapping performed on the overall best linear unbiased estimators (BLUE) computed from all seven environments and the International Wheat Genome Sequencing Consortium (IWGSC) RefSeq v2.0 physical map of 26,449 polymorphic SNPs out of the 90K identified sixteen FHB resistance QTLs that individually accounted for 5.7–10.2% of the phenotypic variance. The positions of two of the FHB resistance QTLs overlapped with plant height and flowering time QTLs. Four of the QTLs (QFhb.dms-3B.1, QFhb.dms-5A.5, QFhb.dms-5A.7, and QFhb.dms-6A.4) were simultaneously associated with disease incidence, severity, and VRI, which accounted for 27.0–33.2% of the total phenotypic variance in the combined environments. Three of the QTLs (QFhb.dms-2A.2, QFhb.dms-2D.2, and QFhb.dms-5B.8) were associated with both incidence and VRI and accounted for 20.5–22.1% of the total phenotypic variance. In comparison with the VRI of the checks, we identified four highly resistant and thirty-three moderately resistant lines and varieties. The new FHB sources of resistance and the physical map of the associated QTLs would provide wheat breeders valuable information towards their efforts in developing improved varieties in western Canada

    Noor hard red spring wheat

    No full text
    Noor hard red spring wheat (Triticum aestivum L.) was developed using a modified bulk breeding method at the University of Alberta, Edmonton, Canada. Noor is an apically awnletted, hollow-stemmed line with a combination of high yield potential, good lodging tolerance, and medium maturity. During the three years (2016-18) of evaluation in the Parkland Wheat Cooperative test, Noor yielded 12% higher than the mean of all checks, and matured similarly to Carberry and Glenn but 3.1 and 2.6 days later than AC Splendor and Parata, respectively. Noor was 94.9 cm tall, shorter than AC Splendor (98.4cm), similar in height to Glenn (94.0cm) and Parata (93.5cm) but taller than Carberry (86.0 cm). The lodging score of Noor (2.1) was lower than Parata (3.0) and AC Splendor (3.0) but similar to Carberry (2.3) and Glenn (2.1). The test weight (kg hL-1) of Noor (80.0) was higher than AC Splendor (78.6), similar to Carberry (80.2) and Parata (80.4) but lower than Glenn (82.2). Grain weight (35 g) and NIR Protein of Noor (14.1%) was lower than all checks. Overall, Noor was rated resistant (R) to the prevalent races of leaf, stem and stripe rusts during the three years of testing. Noor was rated Intermediate (I) to common bunt and Fusarium head blight. Three years of end-use quality evaluation indicated that Noor is acceptable for the Canada Western Red Spring class, with fewer flags.The accepted manuscript in pdf format is listed with the files at the bottom of this page. The presentation of the authors' names and (or) special characters in the title of the manuscript may differ slightly between what is listed on this page and what is listed in the pdf file of the accepted manuscript; that in the pdf file of the accepted manuscript is what was submitted by the author

    Zealand hard red spring wheat

    No full text
    Zealand hard red spring wheat (Triticum aestivum L.) was developed using a modified bulk breeding method at the University of Alberta, Edmonton, Canada. Zealand is apically awn-letted, hollow-stemmed cultivar with a combination of high yield potential, tall plant type, large leaves and early maturity. In three years of testing in the Western Bread Wheat Cooperative Registration Test during 2013-15, Zealand exhibited grain yield similar to Glenn and Carberry, and 5-6% lower than Unity and AAC Viewfield, though this difference was not significant (P > 0.05). Zealand yielded 37 % greater than the highest yielding CWRS check cultivar CDC Osler in A-level testing at a certified organic farm. Zealand matured 1-4 days earlier than the check cultivars, and was taller than all checks but exhibited lodging resistance better than Unity and similar to the other checks. Test weight of Zealand (79.1 kg hL-1) was lower than Glenn and similar to the other checks, while seed mass was in the range of the check cultivars. Overall, Zealand was rated resistant (R) to the prevalent races of leaf rust , moderately resistant (MR) to stripe rust and loose smut; intermediate (I) to stem rust and leaf spot, and moderately susceptible (MS) to common bunt and Fusarium head blight. Three years of end-use quality evaluation indicated that Zealand is acceptable for the Canada Western Red Spring (CWRS) class, with relatively few weaknesses. The tall plant type, large leaves and early maturity render Zealand suitable for organic / high weed environments.The accepted manuscript in pdf format is listed with the files at the bottom of this page. The presentation of the authors' names and (or) special characters in the title of the manuscript may differ slightly between what is listed on this page and what is listed in the pdf file of the accepted manuscript; that in the pdf file of the accepted manuscript is what was submitted by the author

    The Clouston syndrome mutation connexin30 A88V leads to hyperproliferation of sebaceous glands and hearing impairments in mice

    Get PDF
    Distinct mutations in the gap junction protein connexin30 (Cx30) can cause the ectodermal dysplasia Clouston syndrome in humans. We have generated a new mouse line expressing the Clouston syndrome mutation Cx30A88V under the control of the endogenous Cx30 promoter. Our results show that the mutated Cx30A88V protein is incorporated in gap junctional plaques of the epidermis. Homozygous Cx30A88V mice reveal hyperproliferative and enlarged sebaceous glands as well as a mild palmoplantar hyperkeratosis. Additionally, homozygous mutant mice show an altered hearing profile compared to control mice. We conclude that the Cx30A88V mutation triggers hyperproliferation in the skin and changes the cochlear homeostasis in mice. (C) 2014 Federation of European Biochemical Societies. Published by Elsevier B. V. All rights reserved.German Research Foundation [Wi270/30-1, Wi270/33-1, SFB 645

    Identification of Spring Wheat with Superior Agronomic Performance under Contrasting Nitrogen Managements Using Linear Phenotypic Selection Indices

    No full text
    Both the Linear Phenotypic Selection Index (LPSI) and the Restrictive Linear Phenotypic Selection Index (RLPSI) have been widely used to select parents and progenies, but the effect of economic weights on the selection parameters (the expected genetic gain, response to selection, and the correlation between the indices and genetic merits) have not been investigated in detail. Here, we (i) assessed combinations of 2304 economic weights using four traits (maturity, plant height, grain yield and grain protein content) recorded under four organically (low nitrogen) and five conventionally (high nitrogen) managed environments, (ii) compared single-trait and multi-trait selection indices (LPSI vs. RLPSI by imposing restrictions to the expected genetic gain of either yield or grain protein content), and (iii) selected a subset of about 10% spring wheat cultivars that performed very well under organic and/or conventional management systems. The multi-trait selection indices, with and without imposing restrictions, were superior to single trait selection. However, the selection parameters differed quite a lot depending on the economic weights, which suggests the need for optimizing the weights. Twenty-two of the 196 cultivars that showed superior performance under organic and/or conventional management systems were consistently selected using all five of the selected economic weights, and at least two of the selection scenarios. The selected cultivars belonged to the Canada Western Red Spring (16 cultivars), the Canada Northern Hard Red (3), and the Canada Prairie Spring Red (3), and required 83–93 days to maturity, were 72–100 cm tall, and produced from 4.0 to 6.2 t ha−1 grain yield with 14.6–17.7% GPC. The selected cultivars would be highly useful, not only as potential trait donors for breeding under an organic management system, but also for other studies, including nitrogen use efficiency

    Identification of Disease Resistance Parents and Genome-Wide Association Mapping of Resistance in Spring Wheat

    Get PDF
    The likelihood of success in developing modern cultivars depend on multiple factors, including the identification of suitable parents to initiate new crosses, and characterizations of genomic regions associated with target traits. The objectives of the present study were to (a) determine the best economic weights of four major wheat diseases (leaf spot, common bunt, leaf rust, and stripe rust) and grain yield for multi-trait restrictive linear phenotypic selection index (RLPSI), (b) select the top 10% cultivars and lines (hereafter referred as genotypes) with better resistance to combinations of the four diseases and acceptable grain yield as potential parents, and (c) map genomic regions associated with resistance to each disease using genome-wide association study (GWAS). A diversity panel of 196 spring wheat genotypes was evaluated for their reaction to stripe rust at eight environments, leaf rust at four environments, leaf spot at three environments, common bunt at two environments, and grain yield at five environments. The panel was genotyped with the Wheat 90K SNP array and a few KASP SNPs of which we used 23,342 markers for statistical analyses. The RLPSI analysis performed by restricting the expected genetic gain for yield displayed significant (p < 0.05) differences among the 3125 economic weights. Using the best four economic weights, a subset of 22 of the 196 genotypes were selected as potential parents with resistance to the four diseases and acceptable grain yield. GWAS identified 37 genomic regions, which included 12 for common bunt, 13 for leaf rust, 5 for stripe rust, and 7 for leaf spot. Each genomic region explained from 6.6 to 16.9% and together accounted for 39.4% of the stripe rust, 49.1% of the leaf spot, 94.0% of the leaf rust, and 97.9% of the common bunt phenotypic variance combined across all environments. Results from this study provide valuable information for wheat breeders selecting parental combinations for new crosses to develop improved germplasm with enhanced resistance to the four diseases as well as the physical positions of genomic regions that confer resistance, which facilitates direct comparisons for independent mapping studies in the future

    Hip resurfacing arthroplasty in young patients: international high-volume centres’ report on the outcome of 11,382 metal-on-metal hip resurfacing arthroplasties in patients ⩽50 years at surgery

    No full text
    International audienceBackground: Total hip arthroplasty (THA) in patients younger than 50 years poses significant challenges including postoperative limitations of activity and higher failure rates. Sub-par outcomes of hip resurfacing arthroplasty (HRA) in registries remain controversial due to multiple confounders. Favourable HRA results in some studies are often regarded as irreproducible. The aim of this study is to analyse HRA outcomes in a large international cohort. Patients and methods: We compiled a database of 11,382 HRA patients ⩽50 years from an international group of 27 experienced HRA centres from 13 countries. 18 different metal-on-metal (MoM) HRA designs were included with a mean follow-up of 7.6 years. Outcomes were implant survivorship, revision rates, causes for revision, clinical scores and metal ion levels. Outcomes were compared between genders, sizes, implant types and pre-operative diagnoses. Results: Overall cumulative Kaplan-Meier survivorship was 88.9% at 22 years (95% CI: 88.3–89.5%). 2 HRA designs (DePuy Articular Surface Replacement (ASR), and Corin Cormet Hip Resurfacing System (CORMET)) led to inferior results while all others yielded similar survivorships. Excluding ASR and CORMET, implant survivorship in 11,063 cases was 95% at 10 years and 90% at 22 years. In men, implant survivorship was excellent: 99% at 10 years and 92.5% at 21 years. In females, implant survivorship was 90% at 10 years and 81.3% at 22 years. The overall revision rate was 3.6% with most common reasons for revision being implant loosening and adverse local tissue reactions. The best survivorship was found in patients with osteoarthritis (95% CI, 92.1–93.3% at 22 years), the poorest was among dysplastic hips (78.3%; 95% CI, 76.5–80.1% at 20 years, p < 0.001). Conclusions: Comparable revision rates demonstrated here may mitigate some concerns for safety and longevity of MoM HRA implants. Higher demands for activity and functionality in younger patients make HRA a potential alternative to THA
    corecore