3,423 research outputs found
Factors correlated with the advanced life support simulation performance of senior medical students
Steric effects of ions in the charge-related wetting phenomena
Steric effects of ions on the charge-related wetting phenomena are studied. Along with a general treatment, three specific problems in two-dimensional system are considered: a droplet on an electrode, a droplet on a charged surface, and an electrowetting phenomenon on a dielectric. For computation of wetting tension, the electromechanical approach is adopted with the principle of mechanical force balance for each phase. The modified Poisson-Boltzmann equation, which was originally proposed by Bikerman [Philos. Mag. 33, 384 (1942)], is adopted for the analysis of the steric effects. It is found that the steric hindrance reduces significantly both the osmotic pressure and the electrical stress near the triple contact line. This reduction results in a considerable decrease in the wetting tension when the ratio of the capacitance per unit area of the electrical double layer to that of the dielectric layer is small.open111817sciescopu
Lattice Boltzmann modeling of boiling heat transfer: The boiling curve and the effects of wettability
A hybrid thermal lattice Boltzmann (LB) model is presented to simulate thermal multiphase flows with phase change based on an improved pseudopotential LB approach (Li et al., 2013). The present model does not suffer from the spurious term caused by the forcing-term effect, which was encountered in some previous thermal LB models for liquid–vapor phase change. Using the model, the liquid–vapor boiling process is simulated. The boiling curve together with the three boiling stages (nucleate boiling, transition boiling, and film boiling) is numerically reproduced in the LB community for the first time. The numerical results show that the basic features and the fundamental characteristics of boiling heat transfer are well captured, such as the severe fluctuation of transient heat flux in the transition boiling and the feature that the maximum heat transfer coefficient lies at a lower wall superheat than that of the maximum heat flux. Furthermore, the effects of the heating surface wettability on boiling heat transfer are investigated. It is found that an increase in contact angle promotes the onset of boiling but reduces the critical heat flux, and makes the boiling process enter into the film boiling regime at a lower wall superheat, which is consistent with the findings from experimental studies
Lattice Boltzmann methods for multiphase flow and phase-change heat transfer
Over the past few decades, tremendous progress has been made in the development of particle-based discrete simulation methods versus the conventional continuum-based methods. In particular, the lattice Boltzmann (LB) method has evolved from a theoretical novelty to a ubiquitous, versatile and powerful computational methodology for both fundamental research and engineering applications. It is a kinetic-based mesoscopic approach that bridges the microscales and macroscales, which offers distinctive advantages in simulation fidelity and computational efficiency. Applications of the LB method are now found in a wide range of disciplines including physics, chemistry, materials, biomedicine and various branches of engineering. The present work provides a comprehensive review of the LB method for thermofluids and energy applications, focusing on multiphase flows, thermal flows and thermal multiphase flows with phase change. The review first covers the theoretical framework of the LB method, revealing certain inconsistencies and defects as well as common features of multiphase and thermal LB models. Recent developments in improving the thermodynamic and hydrodynamic consistency, reducing spurious currents, enhancing the numerical stability, etc., are highlighted. These efforts have put the LB method on a firmer theoretical foundation with enhanced LB models that can achieve larger liquid-gas density ratio, higher Reynolds number and flexible surface tension. Examples of applications are provided in fuel cells and batteries, droplet collision, boiling heat transfer and evaporation, and energy storage. Finally, further developments and future prospect of the LB method are outlined for thermofluids and energy applications
In situ study of fiber structure development of poly(butylene terephthalate) in a continuous laser-heated drawing process
The structural development of poly(butylene terephthalate) (PBT) fibers was analyzed using in situ wide angle X-ray diffraction and fiber temperature measurements during CO2 laser-heated drawing, in which the necking position on the running fiber could be fixed by CO2 laser irradiation. The measured parameters were determined as functions of the elapsed time after necking with a time resolution of 0.3 ms. The as-spun PBT fibers, which exhibited a low-oriented alpha-crystalline structure, were drawn to a draw ratio of 5 using laser heating. The (001') reflection, which indicates a quasi-smectic fibrillar structure, was not observed before crystallization in contrast to measurements of poly(ethylene terephthalate) (PET) and poly(ethylene 2,6-naphthalene dicarboxylate) (PEN). The alpha-crystal was transformed into an oriented beta-form crystal at the necking position, and the developed beta-crystallites exhibited increased size and altered orientation <2 ms after necking. The fiber temperature increased rapidly at around T-g, and the rearrangement of the beta-crystal primarily occurred as the fiber's temperature rose from 100 to 160 degrees C. The oriented beta-crystal of the drawn fiber transformed into the oriented beta-crystal when the drawing tension was released. Polymer Journal (2012) 44, 1030-1035; doi: 10.1038/pj.2012.65; published online 18 April 2012ArticlePOLYMER JOURNAL. 44(10):1030-1035 (2012)journal articl
A sensitive and specific antigen detection assay for Middle East respiratory syndrome coronavirus
published_or_final_versio
Nonlinear oscillations of a sessile drop on a hydrophobic surface induced by ac electrowetting
We examine the nature of ac electrowetting (EW)-driven axisymmetric oscillations of a sessile water drop on a dielectric substrate. In ac EW, small-amplitude oscillations of a drop differ from the Rayleigh linear modes of freely oscillating drops. In this paper, we demonstrate that changes in the time-averaged contact angle of the sessile drop attributed to the presence of an electric field and a solid substrate mainly caused this discrepancy. We combine the domain perturbation method with the Lindsted-Poincare method to derive an asymptotic formula for resonant frequency. Theoretical analysis shows that the resonant frequency is a function of the time-averaged contact angle. Each mode of the resonance frequency is a linear function of epsilon(1), which is the magnitude of the cosine of the time-averaged contact angle. The most dominant mode in this study, that is, the fundamental mode n = 2, decreases linearly with epsilon(1). The results of the theoretical model are compared with those of both the experiments and numerical simulations. The average resonant frequency deviation between the perturbation solutions and numerical simulations is 4.3%, whereas that between the perturbation solutions and the experiments is 1.8%.ope
Improving the Representation of Cross-Boundary Transport of Anthropogenic Pollution in East Asia Using Radon-222.
We report on 10 years of hourly atmospheric radon, CO, and SO2 observations at Gosan Station, Korea. An improved radon detector was installed during this period and performance of the detectors is compared. A technique is developed whereby the distribution of radon concentrations from a fetch region can be used to select air masses that have consistently been in direct contact with land-based emissions, and have been least diluted en route to the measurement site. Hourly radon concentrations are used to demonstrate and characterise contamination of remote-fetch pollution observations by local emissions at this key WMO GAW site, and a seasonally-varying 5-hour diurnal sampling window is proposed for
days on which diurnal cycles are evident to minimise these effects. The seasonal variability in mixing depth and
“background” pollutant concentrations are characterised. Based on a subset of observations most representative of the
important regional fetch areas for this site, and least affected by local emissions, seasonal estimates of CO and SO2 in air
masses originating from South China, North China, Korea and Japan are compared across the decade of observations. 2016, © Taiwan Association for Aerosol Researc
Crossover critical behavior of Ga1-xMnxAs
The critical behavior of Ga1-xMnxAs in a close vicinity of the Curie
temperature was experimentally studied by using the thermal diffusivity
measurements. Taking into account that the inverse of the thermal diffusivity
has the same critical behavior as the specific heat, the critical exponent
{\alpha} for the samples investigated has been determined. With approaching
close to the critical temperature, the crossover from the mean-field-like to
the Ising-like critical behavior has been observed. From the crossover behavior
the values of the Ginzburg number and the exchange interaction length in
Ga1-xMnxAs with different concentrations of Mn were determined.Comment: 17 pages, 5 figure
Enhanced mitochondrial superoxide scavenging does not Improve muscle insulin action in the high fat-fed mouse
Improving mitochondrial oxidant scavenging may be a viable strategy for the treatment of insulin resistance and diabetes. Mice overexpressing the mitochondrial matrix isoform of superoxide dismutase (sod2(tg) mice) and/or transgenically expressing catalase within the mitochondrial matrix (mcat(tg) mice) have increased scavenging of O2(˙-) and H2O2, respectively. Furthermore, muscle insulin action is partially preserved in high fat (HF)-fed mcat(tg) mice. The goal of the current study was to test the hypothesis that increased O2(˙-) scavenging alone or in combination with increased H2O2 scavenging (mtAO mice) enhances in vivo muscle insulin action in the HF-fed mouse. Insulin action was examined in conscious, unrestrained and unstressed wild type (WT), sod2(tg), mcat(tg) and mtAO mice using hyperinsulinemic-euglycemic clamps (insulin clamps) combined with radioactive glucose tracers following sixteen weeks of normal chow or HF (60% calories from fat) feeding. Glucose infusion rates, whole body glucose disappearance, and muscle glucose uptake during the insulin clamp were similar in chow- and HF-fed WT and sod2(tg) mice. Consistent with our previous work, HF-fed mcat(tg) mice had improved muscle insulin action, however, an additive effect was not seen in mtAO mice. Insulin-stimulated Akt phosphorylation in muscle from clamped mice was consistent with glucose flux measurements. These results demonstrate that increased O2(˙-) scavenging does not improve muscle insulin action in the HF-fed mouse alone or when coupled to increased H2O2 scavenging
- …