109 research outputs found
Oxidative addition to palladium(0) Diphosphine complexes: Observations of mechanistic complexity with iodobenzene as reactant
Using a combination of electrochemical and NMR techniques, the oxidative addition of PhX to three closely related bis-diphosphine P2Pd 0 complexes, where the steric bulk of just one substituent was varied, has been analysed quantitatively. For the complex derived from MetBu2P, a rapid reaction ensued with PhI following an associative mechanism, and data was also obtained by cyclic voltammetry for PhOTs, PhBr and PhCl, revealing distinct relative reactivities from the related (PCx 3)2Pd complex (Cx=cyclohexyl) previously studied. The corresponding EttBu2P complex reacted more slowly with PhI and was studied by NMR spectroscopy. The reaction course indicated a mixture of pathways, with contribution from a component that was [PhI] independent. For the CxtBu2P complex, reaction was again monitored by NMR spectroscopy, and was even slower. At high PhI concentrations reaction was predominantly linear in [PhI], but at lower concentrations the [PhI] independent pathway was again observed, and an accelerating influence of the reaction product was observed over the concentration range. The NMR spectra of the EttBu2P and CxtBu2P complexes conducted in C6D6 shows some line broadening that was augmented on addition of PhI. NMR experiments carried out in parallel show that there is rapid ligand exchange between free phosphine and the Pd2Pd complex and also a slow ligand crossover between different P2Pd complexes. DFT calculations were carried out to further test the feasibility of C6D6 involvement in the oxidative addition process, and located Van der Waals complexes for association of the P2Pd0 complexes with either PhI or benzene. PhI or solvent-assisted pathways for ligand loss are both lower in energy than direct ligand dissociation. Taken all together, these results provide a consistent explanation for the surprising complexity of an apparently simple reaction step. The clear dividing line between reactions that give a di- or monophosphine palladium complex after oxidative addition clarifies the participation of the ligand in coupling catalysis. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Feasibility and acceptability of rapid HIV screening in a labour ward in Togo
Background: HIV screening in a labour ward is the last opportunity to initiate an antiretroviral prophylaxis among pregnant women living with HIV to prevent mother-to-child HIV transmission. Little is known about the feasibility and acceptability of HIV screening during labour in West Africa. Findings: A cross-sectional survey was conducted in the labour ward at the Tokoin Teaching Hospital in Lomé (Togo) between May and August 2010. Pregnant women admitted for labour were randomly selected to enter the study and were interviewed on the knowledge of their HIV status. Clinical and biological data were collected from the individual maternal health chart. HIV testing or re-testing was systematically proposed to all pregnant women. Among 1530 pregnant women admitted for labour, 508 (32.2%) were included in the study. Information on HIV screening was available in the charts of 359 women (71%). Overall, 467 women accepted HIV testing in the labour ward (92%). The HIV prevalence was 8.8% (95% confidence interval: 6.4 to 11.7%). Among the 41 women diagnosed as living with HIV during labour, 34% had not been tested for HIV during pregnancy and were missed opportunities. Antiretroviral prophylaxis had been initiated antenatally for 24 women living with HIV and 17 in the labour room. Conclusions: This study is the first to show in West Africa that HIV testing in a labour room is feasible and well accepted by pregnant women. HIV screening in labour rooms needs to be routinely implemented to reduce missed opportunities for intervention aimed at HIV care and prevention, especially PMTCT
Oxidative addition to palladium(0) Diphosphine complexes: Observations of mechanistic complexity with iodobenzene as reactant
Using a combination of electrochemical and NMR techniques, the oxidative addition of PhX to three closely related bis-diphosphine P2Pd 0 complexes, where the steric bulk of just one substituent was varied, has been analysed quantitatively. For the complex derived from MetBu2P, a rapid reaction ensued with PhI following an associative mechanism, and data was also obtained by cyclic voltammetry for PhOTs, PhBr and PhCl, revealing distinct relative reactivities from the related (PCx 3)2Pd complex (Cx=cyclohexyl) previously studied. The corresponding EttBu2P complex reacted more slowly with PhI and was studied by NMR spectroscopy. The reaction course indicated a mixture of pathways, with contribution from a component that was [PhI] independent. For the CxtBu2P complex, reaction was again monitored by NMR spectroscopy, and was even slower. At high PhI concentrations reaction was predominantly linear in [PhI], but at lower concentrations the [PhI] independent pathway was again observed, and an accelerating influence of the reaction product was observed over the concentration range. The NMR spectra of the EttBu2P and CxtBu2P complexes conducted in C6D6 shows some line broadening that was augmented on addition of PhI. NMR experiments carried out in parallel show that there is rapid ligand exchange between free phosphine and the Pd2Pd complex and also a slow ligand crossover between different P2Pd complexes. DFT calculations were carried out to further test the feasibility of C6D6 involvement in the oxidative addition process, and located Van der Waals complexes for association of the P2Pd0 complexes with either PhI or benzene. PhI or solvent-assisted pathways for ligand loss are both lower in energy than direct ligand dissociation. Taken all together, these results provide a consistent explanation for the surprising complexity of an apparently simple reaction step. The clear dividing line between reactions that give a di- or monophosphine palladium complex after oxidative addition clarifies the participation of the ligand in coupling catalysis. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Pd0-Catalyzed Allylic Aminations: Kinetics and Mechanism of the Reaction of Secondary Amines with Cationic [(η3-allyl)PdL2]+ Complexes
International audienc
Divalent palladium and platinum complexes containg rigid bidentate nitrogen ligands and electrochemistry of the palladium complexes
Oxidative addition to palladium(0) Diphosphine complexes: Observations of mechanistic complexity with iodobenzene as reactant
Using a combination of electrochemical and NMR techniques, the oxidative addition of PhX to three closely related bis-diphosphine P2Pd 0 complexes, where the steric bulk of just one substituent was varied, has been analysed quantitatively. For the complex derived from MetBu2P, a rapid reaction ensued with PhI following an associative mechanism, and data was also obtained by cyclic voltammetry for PhOTs, PhBr and PhCl, revealing distinct relative reactivities from the related (PCx 3)2Pd complex (Cx=cyclohexyl) previously studied. The corresponding EttBu2P complex reacted more slowly with PhI and was studied by NMR spectroscopy. The reaction course indicated a mixture of pathways, with contribution from a component that was [PhI] independent. For the CxtBu2P complex, reaction was again monitored by NMR spectroscopy, and was even slower. At high PhI concentrations reaction was predominantly linear in [PhI], but at lower concentrations the [PhI] independent pathway was again observed, and an accelerating influence of the reaction product was observed over the concentration range. The NMR spectra of the EttBu2P and CxtBu2P complexes conducted in C6D6 shows some line broadening that was augmented on addition of PhI. NMR experiments carried out in parallel show that there is rapid ligand exchange between free phosphine and the Pd2Pd complex and also a slow ligand crossover between different P2Pd complexes. DFT calculations were carried out to further test the feasibility of C6D6 involvement in the oxidative addition process, and located Van der Waals complexes for association of the P2Pd0 complexes with either PhI or benzene. PhI or solvent-assisted pathways for ligand loss are both lower in energy than direct ligand dissociation. Taken all together, these results provide a consistent explanation for the surprising complexity of an apparently simple reaction step. The clear dividing line between reactions that give a di- or monophosphine palladium complex after oxidative addition clarifies the participation of the ligand in coupling catalysis. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Oxidative addition to palladium(0) Diphosphine complexes: Observations of mechanistic complexity with iodobenzene as reactant
Using a combination of electrochemical and NMR techniques, the oxidative addition of PhX to three closely related bis-diphosphine P2Pd 0 complexes, where the steric bulk of just one substituent was varied, has been analysed quantitatively. For the complex derived from MetBu2P, a rapid reaction ensued with PhI following an associative mechanism, and data was also obtained by cyclic voltammetry for PhOTs, PhBr and PhCl, revealing distinct relative reactivities from the related (PCx 3)2Pd complex (Cx=cyclohexyl) previously studied. The corresponding EttBu2P complex reacted more slowly with PhI and was studied by NMR spectroscopy. The reaction course indicated a mixture of pathways, with contribution from a component that was [PhI] independent. For the CxtBu2P complex, reaction was again monitored by NMR spectroscopy, and was even slower. At high PhI concentrations reaction was predominantly linear in [PhI], but at lower concentrations the [PhI] independent pathway was again observed, and an accelerating influence of the reaction product was observed over the concentration range. The NMR spectra of the EttBu2P and CxtBu2P complexes conducted in C6D6 shows some line broadening that was augmented on addition of PhI. NMR experiments carried out in parallel show that there is rapid ligand exchange between free phosphine and the Pd2Pd complex and also a slow ligand crossover between different P2Pd complexes. DFT calculations were carried out to further test the feasibility of C6D6 involvement in the oxidative addition process, and located Van der Waals complexes for association of the P2Pd0 complexes with either PhI or benzene. PhI or solvent-assisted pathways for ligand loss are both lower in energy than direct ligand dissociation. Taken all together, these results provide a consistent explanation for the surprising complexity of an apparently simple reaction step. The clear dividing line between reactions that give a di- or monophosphine palladium complex after oxidative addition clarifies the participation of the ligand in coupling catalysis. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Rates of the oxidative addition of benzyl halides to a metallacyclic palladium(II) complex and of the reductive elimination from a benzyl-palladium(IV) complex.
Pd(II) metallacyclic complexes are key intermediates in sequential reactions in which three new
C−C bonds are formed in an aromatic ring. The Pd(II) metallacyclic complex 10 with
phenanthroline as ligand undergoes oxidative addition to benzyl bromide or chloride in DMF to
generate benzyl-Pd(IV) complexes. The rate constant of the oxidative addition is determined by
means of electrochemical techniques, with the expected reactivity order PhCH2Br (k1Br = 3.6 M−1 s−1)
> PhCH2Cl (k1Cl = 6 × 10−3 M−1 s−1) at 29 °C. When the benzyl-Pd(IV) complex is generated from
PhCH2Br, the oxidative addition is followed by a slow C−C reductive elimination, which gives a
Pd(II) complex. The rate constant of the reductive elimination has been determined in DMF (k2Br = 6
× 10−4 s−1) at 29 °C
Formation reversible d'un hydrure de palladium (II) cationique HPd(PPh3) 2+ par addition oxydante de l'acide acetique ou formique avec le palladium(0)
Putative protective effect of inspiratory threshold loading against exercise-induced supraspinal diaphragm fatigue
- …