Test Platform Development of Vessel???s Power Management System Using Hardware- in-the-Loop-Simulation Technique

A PMS (Power Management System) controls vessel's power systems to improve the system efficiency and to protect a blackout condition. The PMS should be developed with considering the type and the capacity of the vessel???s power system. It is necessary to test the PMS functions developed for vessel???s safe operations under various sailing situations. Therefore, the function tests in cooperation with practical power systems are required in the PMS development. In this paper, a hardware-in-the-loop (HIL) simulator is developed for the purposes of the PMS function tests. The HIL simulator can be more cost-effective, more time-saved, easier to reproduce, and safer beyond the normal operating range than conventional off-line simulators, especially at early stages in development processes or during fault tests. Vessel's power system model is developed by using a MATLAB/SIMULINK software and by communicating between an OPAL-RT???s OP5600 simulator. The PMS uses a Modbus communication protocol implemented using LabVIEW software. Representative tests of the PMS functions are performed to verify the validity of the proposed HIL-based test platform

Isolated Three-port DC-DC Converter Employing ESS to Obtain Voltage Balancing Capability for Bipolar LVDC Distribution System

A bipolar low-voltage DC (LVDC) distribution system used in residential and building applications requires AC-DC converters and voltage balancers that balance the two DC bus polarities. The bipolar DC bus voltage level only relies on the voltage balancer tied with the AC grid. An isolated DC-DC converter for an energy storage system (ESS) with the voltage balancing capability is proposed to prevent the bipolar voltage level collapse caused by the failure of the grid-tied voltage balancer. The proposed converter topology is an enhanced three-port dual-active-bridge (DAB) converter which can balance the bipolar DC voltage level without complex control. Furthermore, it has less current stress in power switches than that of the conventional three-port DAB converter. The effectiveness of the proposed converter is verified with a 3-kW prototype converter

Real-Time Test-Bed System Development Using Power Hardware-in-the-Loop (PHIL) Simulation Technique for Reliability Test of DC Nano Grid

Since various power sources such as renewable energy and energy storage systems (ESSs) are connected to the DC grid, the reliability of the grid system is significant. However, the configuration of an actual DC grids for testing the reliability of the grid system is inconvenient, expensive and dangerous. In this paper, a test-bed system made up of a 20-kW DC nano grid and a control algorithm considering an external grid based on Power Hardware-in-the-Loop (PHIL) simulation are proposed to demonstrate the reliability of the DC grid. Using the PHIL simulation technique, target grids can be safely implemented with laboratory-level instruments and simulated by real-time simulators, which emulates grid operations that are similar to the actual grid. In addition, using the proposed control algorithm, the operations of grid-connected converters are demonstrated according to the grid-connected or islanding modes. Finally, the reliability of the simulated DC nano grid and the effectiveness of the grid-connected converter are verified using the PHIL simulation system with 3-kW prototype converters

Practical Controller Design of Three-Phase Dual Active Bridge Converter for Low Voltage DC Distribution System

In a low voltage DC (LVDC) distribution system, isolated bi-directional DC-DC converters are key devices to control power flows. A three-phase dual-active-bridge (3P-DAB) converter is one of the suitable candidates due to inherent soft-switching capability, low conduction loss, and high-power density. However, the 3P-DAB converter requires a well-designed controller due to the influence of the equivalent series resistance (ESR) of an output filter capacitor, degrading the performance of the 3P-DAB converter in terms of high-frequency noise. Unfortunately, there is little research that considers the practical design methodology of the 3P-DAB converter's controller because of its complexity. In this paper, the influence of the ESR on the 3P-DAB converter is presented. Additionally, the generalized average small-signal model (SSM) of the 3P-DAB converter including the ESR of the capacitive output filter is presented. Based on this model, an extended small-signal model and appropriate controller design guide, and performance comparison are presented based on the frequency domain analysis. Finally, experimental results verify the validity of the proposed controller using a 25 kW prototype 3P-DAB converter

Autonomous Control Strategy of DC Microgrid for Islanding mode using Power Line Communication

This paper proposes a DC-bus signaling (DBS) method for autonomous power management in a DC microgrid, used to improve its reliability. Centralized power management systems require communication between the power sources and loads. However, the DBS method operates based on the common DC-bus voltage and does not require communication. Based on the DC-bus voltage band, the DC-bus voltage can be used to inform the status of the DC-bus in various scenarios. The DC microgrid operates independently to maintain the system stably in the DC-bus voltage band. The DC microgrid can be divided into a grid-connected mode and an islanding mode. This paper proposes a control strategy based on power management of various independent components in islanding mode. In addition, the autonomous control method for switching the converter???s operation between grid-connected mode and islanding mode is proposed. A DC microgrid test bed consisting of a grid-connected AC/DC converter, a bidirectional DC/DC converter, a renewable energy simulator, DC home appliances and a DC-bus protector is used to test the proposed control strategy. The proposed autonomous control strategy is experimentally verified using the DC microgrid test bed

Analysis and Design of Three-Phase Buck Rectifier Employing UPS to Supply High Reliable DC Power

In the DC distribution system, to step down the DC voltage level from the AC grid voltage, the conventional topologies require multiple power conversion stages and bulky line-frequency transformers, which degrade their power density and cost-effectiveness. In addition, the conventional topologies suffer from a shoot-through problem resulting in their low system reliability. In this paper, to overcome the above issues, systematic design approaches of a three-phase buck rectifier with an uninterruptible power supply (UPS) and a protection algorithm are proposed to obtain the high reliability of the DC distribution system, which can deal with fault conditions and can regulate the output voltage level. It only requires a single stage of the three-phase buck rectifier. Also, a thyristor switch is added without any commutation circuits to cut off the output from the fault circuit. The shoot-through faults do not occur in the buck rectifier, leading to high reliability. A dual-active-bridge (DAB) DC-DC converter is applied as the UPS to supply the electric power from the battery when the buck rectifier is shut down under the fault conditions. Finally, the protection algorithm is proposed to detect the fault conditions and to regulate the output voltage level

DHP-Derivative and Low Oxygen Tension Effectively Induces Human Adipose Stromal Cell Reprogramming

BACKGROUND AND METHODS: In this study, we utilized a combination of low oxygen tension and a novel anti-oxidant, 4-(3,4-dihydroxy-phenyl)-derivative (DHP-d) to directly induce adipose tissue stromal cells (ATSC) to de-differentiate into more primitive stem cells. De-differentiated ATSCs was overexpress stemness genes, Rex-1, Oct-4, Sox-2, and Nanog. Additionally, demethylation of the regulatory regions of Rex-1, stemnesses, and HIF1alpha and scavenging of reactive oxygen species were finally resulted in an improved stem cell behavior of de-differentiate ATSC (de-ATSC). Proliferation activity of ATSCs after dedifferentiation was induced by REX1, Oct4, and JAK/STAT3 directly or indirectly. De-ATSCs showed increased migration activity that mediated by P38/JUNK and ERK phosphorylation. Moreover, regenerative efficacy of de-ATSC engrafted spinal cord-injured rats and chemical-induced diabetes animals were significantly restored their functions. CONCLUSIONS/SIGNIFICANCE: Our stem cell remodeling system may provide a good model which would provide insight into the molecular mechanisms underlying ATSC proliferation and transdifferentiation. Also, these multipotent stem cells can be harvested may provide us with a valuable reservoir of primitive and autologous stem cells for use in a broad spectrum of regenerative cell-based disease therapy

How Does the SST Variability over the Western North Atlantic Ocean Control Arctic Warming over the Barents-Kara Seas?

Arctic warming over the BarentsKara Seas and its impacts on the mid-latitude circulations have been widely discussed. However, the specific mechanism that brings the warming still remains unclear. In this study, a possible cause of the regional Arctic warming over the BarentsKara Seas during early winter (OctoberDecember) is suggested. We found that warmer sea surface temperature anomalies over the western North Atlantic Ocean (WNAO) modulate the transient eddies overlying the oceanic frontal region. The altered transient eddy vorticity flux acts as a source for the Rossby wave straddling the western North Atlantic and the BarentsKara Seas (Scandinavian pattern), and induces a significant warm advection, increasing surface and lower-level temperature over the Eurasian sector of the Arctic Ocean. The importance of the sea surface temperature anomalies over the WNAO and subsequent transient eddy forcing over the WNAO was also supported by both specially designed simple model experiments and general circulation model experiments