Validation of a new spectrometer for noninvasive measurement of cardiac output

Acetylene is a blood-soluble gas and for many years its uptake rate during rebreathing tests has been used to calculate the flow rate of blood through the lungs (normally equal to cardiac output) as well as the volume of lung tissue. A new, portable, noninvasive instrument for cardiac output determination using the acetylene uptake method is described. The analyzer relies on nondispersive IR absorption spectroscopy as its principle of operation and is configured for extractive (side-stream) sampling. The instrument affords exceptionally fast (30 ms, 10%–90%, 90%–10%, at 500 mL min–1 flow rates), interference-free, simultaneous measurement of acetylene, sulfur hexafluoride (an insoluble reference gas used in the cardiac output calculation), and carbon dioxide (to determine alveolar ventilation), with good (typically ±2% full-scale) signal-to-noise ratios. Comparison tests with a mass spectrometer using serially diluted calibration gas samples gave excellent (R2>0.99) correlation for all three gases, validating the IR system's linearity and accuracy. A similar level of agreement between the devices also was observed during human subject C2H2 uptake tests (at rest and under incremental levels of exercise), with the instruments sampling a common extracted gas stream. Cardiac output measurements by both instruments were statistically equivalent from rest to 90% of maximal oxygen consumption; the physiological validity of the measurements was confirmed by the expected linear relationship between cardiac output and oxygen consumption, with both the slope and intercept in the published range. These results indicate that the portable, low-cost, rugged prototype analyzer discussed here is suitable for measuring cardiac output noninvasively in a point-of-care setting

Ionic Capillary Evaporation in Weakly Charged Nanopores

Using a variational field theory, we show that an electrolyte confined to a neutral cylindrical nanopore traversing a low dielectric membrane exhibits a first-order ionic liquid-vapor pseudo-phase-transition from an ionic-penetration "liquid" phase to an ionic-exclusion "vapor" phase, controlled by nanopore-modified ionic correlations and dielectric repulsion. For weakly charged nanopores, this pseudotransition survives and may shed light on the mechanism behind the rapid switching of nanopore conductivity observed in experiments.Comment: This version is accepted for publication in PR

Variational approach for electrolyte solutions: from dielectric interfaces to charged nanopores

A variational theory is developed to study electrolyte solutions, composed of interacting point-like ions in a solvent, in the presence of dielectric discontinuities and charges at the boundaries. Three important and non-linear electrostatic effects induced by these interfaces are taken into account: surface charge induced electrostatic field, solvation energies due to the ionic cloud, and image charge repulsion. Our variational equations thus go beyond the mean-field theory. The influence of salt concentration, ion valency, dielectric jumps, and surface charge is studied in two geometries. i) A single neutral air-water interface with an asymmetric electrolyte. A charge separation and thus an electrostatic field gets established due to the different image charge repulsions for coions and counterions. Both charge distributions and surface tension are computed and compared to previous approximate calculations. For symmetric electrolyte solutions close to a charged surface, two zones are characterized. In the first one, with size proportional to the logarithm of the coupling parameter, strong image forces impose a total ion exclusion, while in the second zone the mean-field approach applies. ii) A symmetric electrolyte confined between two dielectric interfaces as a simple model of ion rejection from nanopores. The competition between image charge repulsion and attraction of counterions by the membrane charge is studied. For small surface charge, the counterion partition coefficient decreases with increasing pore size up to a critical pore size, contrary to neutral membranes. For larger pore sizes, the whole system behaves like a neutral pore. The prediction of the variational method is also compared with MC simulations and a good agreement is observed.Comment: This version is accepted for publication in Phys. Rev. E

LDEF data: Comparisons with existing models

The relationship between the observed cratering impact damage on the Long Duration Exposure Facility (LDEF) versus the existing models for both the natural environment of micrometeoroids and the man-made debris was investigated. Experimental data was provided by several LDEF Principal Investigators, Meteoroid and Debris Special Investigation Group (M&D SIG) members, and by the Kennedy Space Center Analysis Team (KSC A-Team) members. These data were collected from various aluminum materials around the LDEF satellite. A PC (personal computer) computer program, SPENV, was written which incorporates the existing models of the Low Earth Orbit (LEO) environment. This program calculates the expected number of impacts per unit area as functions of altitude, orbital inclination, time in orbit, and direction of the spacecraft surface relative to the velocity vector, for both micrometeoroids and man-made debris. Since both particle models are couched in terms of impact fluxes versus impactor particle size, and much of the LDEF data is in the form of crater production rates, scaling laws have been used to relate the two. Also many hydrodynamic impact computer simulations were conducted, using CTH, of various impact events, that identified certain modes of response, including simple metallic target cratering, perforations and delamination effects of coatings

ADGS-2100 Adaptive Display and Guidance System Window Manager Analysis

Recent advances in modeling languages have made it feasible to formally specify and analyze the behavior of large system components. Synchronous data flow languages, such as Lustre, SCR, and RSML-e are particularly well suited to this task, and commercial versions of these tools such as SCADE and Simulink are growing in popularity among designers of safety critical systems, largely due to their ability to automatically generate code from the models. At the same time, advances in formal analysis tools have made it practical to formally verify important properties of these models to ensure that design defects are identified and corrected early in the lifecycle. This report describes how these tools have been applied to the ADGS-2100 Adaptive Display and Guidance Window Manager being developed by Rockwell Collins Inc. This work demonstrates how formal methods can be easily and cost-efficiently used to remove defects early in the design cycle

Damage areas on selected LDEF aluminum surfaces

With the U.S. about to embark on a new space age, the effects of the space environment on a spacecraft during its mission lifetime become more relevant. Included among these potential effects are degradation and erosion due to micrometeoroid and debris impacts, atomic oxygen and ultraviolet light exposure as well as material alteration from thermal cycling, and electron and proton exposure. This paper focuses on the effects caused by micrometeoroid and debris impacts on several LDEF aluminum plates from four different bay locations: C-12, C-10, C-01, and E-09. Each plate was coated with either a white, black, or gray thermal paint. Since the plates were located at different orientations on the satellite, their responses to the hypervelocity impacts varied. Crater morphologies range from a series of craters, spall zones, domes, spaces, and rings to simple craters with little or no spall zones. In addition, each of these crater morphologies is associated with varying damage areas, which appear to be related to their respective bay locations and thus exposure angles. More than 5% of the exposed surface area examined was damaged by impact cratering and its coincident effects (i.e., spallation, delamination and blow-off). Thus, results from this analysis may be significant for mission and spacecraft planners and designers

Evidence for Intergalactic Absorption in the TeV Gamma-Ray Spectrum of Mkn 501

The recent HEGRA observations of the blazar Mkn 501 show strong curvature in the very high energy gamma-ray spectrum. Applying the gamma-ray opacity derived from an empirically based model of the intergalactic infrared background radiation field (IIRF), to these observations, we find that the intrinsic spectrum of this source is consistent with a power-law: dN/dE~ E^-alpha with alpha=2.00 +/- 0.03 over the range 500 GeV - 20 TeV. Within current synchrotron self-Compton scenarios, the fact that the TeV spectral energy distribution of Mkn 501 does not vary with luminosity, combined with the correlated, spectrally variable emission in X-rays, as observed by the BeppoSAX and RXTE instruments, also independently implies that the intrinsic spectrum must be close to alpha=2. Thus, the observed curvature in the spectrum is most easily understood as resulting from intergalactic absorption.Comment: 7 pages, 1 figure, accepted in ApJ Letters 1999 April

Beyond Survey Self-Reports: Using Physiology to Tap Political Orientations

Some aspects of our attitudes are composed of things outside of our consciousness. However, traditional survey research does not use measurements that are able to tap into these aspects of public opinion. We describe, recommend, and demonstrate a procedure by which non-self-reported responses can be measured in order to test whether these responses have independent effects on individuals’ preferences. We use one of the better-known physiological measures—electrodermal activity or skin conductance—and illustrate its potential by reporting our own study of attitudes toward President Barack Obama. We find that both self-reported emotional responses and physiological responses to Obama’s image independently correlate with variation in the intensity of attitudes regarding his job approval and his central policy proposal: health-care reform

CNTRICS Final Task Selection: Long-term Memory

Long-term memory (LTM) is a multifactorial construct, composed of different stages of information processing and different cognitive operations that are mediated by distinct neural systems, some of which may be more responsible for the marked memory problems that limit the daily function of individuals with schizophrenia. From the outset of the CNTRICS initiative, this multidimensionality was appreciated, and an effort was made to identify the specific memory constructs and task paradigms that hold the most promise for immediate translational development. During the second CNTRICS meeting, the LTM group identified item encoding and retrieval and relational encoding and retrieval as key constructs. This article describes the process that the LTM group went through in the third and final CNTRICS meeting to select nominated tasks within the 2 LTM constructs and within a reinforcement learning construct that were judged most promising for immediate development. This discussion is followed by each nominating authors' description of their selected task paradigm, ending with some thoughts about future directions.Psycholog