1,598 research outputs found
Kontribusi Gaya Kepemimpinan Dan Motivasi Terhadap Kinerja Pegawai Pada Badan Kepegawaian Dan Pengembangan Sumber Daya Manusia Kota Baubau
Penelitian ini bertujuan untuk mengetahui apakah terdapat hubungan antara gaya kepemimpinan dan motivasi terhadap kinerja pegawai. Penelitian ini dilakukan pada Badan Kepegawaian dan Pengembangan Sumber Daya Manusia kota Baubau dengan menggunakan 38 orang pegawai sebagai sampel. Metode yang digunakan pada penelitian ini adalah kuantitatif dengan pendekatan regresi sederhana untuk membuktikan hipotesis satu dan dua, serta pendekatan analisis jalur (path analysis) untuk membuktikan hipotesis tiga. Hasil analisis membuktikan bahwa terdapat hubungan yang signifikan antara gaya kepemimpinan terhadap kinerja pegawai dengan koefisien pengaruh sebesar 2.595; terdapat hubungan yang signifikan antara motivasi terhadap kinerja pegawai dengan koefisien pengaruh sebesar 4.469; dan terdapat hubungan yang signifikan antara kepemimpinan melalui motivasi terhadap kinerja pegawai dengan koefisien pengaruh sebesar 0.271 atau 27.1%.Kata Kunci: Gaya Kepemimpinan, Motivasi, Kinerja Pegawa
Jerusalem and the politics of settlement in the Middle East
This thesis covers the issue of Jerusalem in the Arab-Israeli conflict since the British occupation 1917, the main argument is that , contrary to assertions the conflict has defined and redefined their positions regarding the city in different occasions , the construction of nation-states and national identities have been the primary reason for the changes in the definitions. By drawing in the theory of conflict resolution and the literature of nationalism the thesis validates the core argument by close scrutiny of the positions held by the parties to the conflic
Octane requirement increase arising from the use of lead free fuel
Lead in petrol has been identified as a health hazard and attempts are being made to create a lead-free atmosphere. Through an intensive study a review is made of the various options available to the automobile and petroleum industry. The economic and atmospheric penalties coupled with automobile fuel consumption trends are calculated and presented in both graphical and tabulated form. Experimental measurements of carbon monoxide and hydrocarbon emissions are also presented for certain selected fuels. Reduction in CO and HC's with the employment of a three-way catalyst is also discussed. All tests were carried out on a Fiat 127A engine at wide open throttle and standard timing setting. A Froude dynamometer was used to vary engine speed. With the introduction of lead-free petrol, interest in combustion chamber deposits in spark ignition engines has ben renewed. These deposits cause octane requirement increase or rise in engine knock and decreased volumetric efficiency. The detrimental effect of the deposits has been attributed to the physical volume of the deposit and to changes in heat transfer. This study attempts to assess why leaded deposits, though often greater in mass and volume, yield relatively lower ORI when compared to lead-free deposits under identical operating conditions. This has been carried out by identifying the differences in the physical nature of the deposit and then through measurement of the thermal conductivity and permeability of the deposits. The measured thermal conductivity results are later used in a mathematical model to determine heat transfer rates and temperature variation across the engine wall and deposit. For the model, the walls of the combustion cylinder and top are assumed to be free of engine deposit, the major deposit being on the piston head. Seven different heat transfer equations are formulated describing heat flow at each part of the four stroke cycle, and the variation of cylinder wall area exposed to gas mixture is accounted for. The heat transfer equations are solved using numerical methods and temperature variations across the wall identified. Though the calculations have been carried out for one particular moment in the cycle, similar calculations are possible for every degree of the crank angle, and thus further information regarding location of maximum temperatures at every degree of the crank angle may also be determined. In conclusion, thermal conductivity values of leaded and lead-free deposits have been found. The fundamental concepts of a mathematical model with great potential have been formulated and it is hoped that with future work it may be used in a simulation for different engine construction materials and motor fuels, leading to better design of future prototype engines
Goods and Services Tax: Benefits and its Impact on Indian Economy
The Goods and Services Tax, or GST, took effect on July 1, 2017. The new tax system was designed to replace all current indirect taxes with a single, comprehensive tax. The Products and Services Tax (GST) is a consumption tax imposed on goods and services depending on their final destination (Bhushan Satya).Simply said, GST is a single tax that applies to the delivery of goods and services from the producer to the end user. In a nutshell, it's a tax imposed solely on value addition, with input tax credits transferred to successive stages of value addition, implying that the ultimate tax burden would fall on the end user of products or services.
The anticipated advantages of implementing the GST are that it would decrease the cascading impact of taxes, i.e. it will eliminate tax on tax. It was also anticipated to stimulate demand for products and the elimination of a number of indirect taxes such as VAT, CST, Service tax, CAD, SAD, and Excise, among others, which would help to improve the Indian economy in the long term. This paper tries to highlight the cost and benefits bear by the economy due to implementation of the GST.
The paper also tries to find out the expected rate of growth of economy after the GST. Finally, the study tries to conclude that how it would be disrupted and benefits the economy in the long run
The Effect of Mobile Phase Composition and Temperature on the Adsorption Behavior of Tryptophan
Single-component adsorption isotherm data were acquired by frontal analysis for tryptophan on a C18-Kromasil packed column, using acetonitrile-water solutions of various compositions (2.5, 5, and 7.5% ACN + 1% ACOH). These isotherms have a complex behavior, exhibiting at least one clear inflection point at an intermediate concentration and, possibly, another such point, close to the origin. The isotherm for 2.5 % ACN has the strongest curvature. At high concentrations, all these isotherms tend toward a limit, showing that the adsorbent has a finite saturation capacity. At low concentrations, these isotherms seem to exhibit langmuirian behavior. The isotherm model accounting best for these data is the bi-Moreau model, showing that two types of adsorption sites coexist on the surface and that strong adsorbate–adsorbate interactions take place. Large concentration band profiles of tryptophan were obtained for the three mobile phase compositions, at five different temperatures and the best values of the isotherm coefficients were determined by the inverse method (IM) of chromatography. The retention time of tryptophan decreases rapidly with increasing acetonitrile concentration in the mobile phase and so do the saturation capacities of the two types of adsorption sites, with the highest values of the two saturation capacities being found for the lowest ACN content and the lowest temperature. The adsorption constant on the low energy sites decreases with increasing acetonitrile content and temperature. In contrast, the adsorption constant on the high energy sites increases with increasing ACN content of the mobile phase but decreases with increasing temperature. The solute–solute interaction parameters for the low and the high energy adsorption sites increase rapidly with increasing ACN concentration in the mobile phase and with increasing temperature
Electrodeposition of Alloys of Iron Group Elements with Tungsten & Phosphorus and their Structural and Magnetic Properties(タングステントとリンを含む鉄族元素合金の電着とその構造および磁気的性質)
- …