3D fibre architecture of fibre-reinforced sand

International audienceThe mechanical behaviour of fibre-reinforced sands is primarily governed by the three-dimensional fibre architecture within the sand matrix. In laboratory, the normal procedures for sample preparation of fibre-sand mixtures generally produce a distribution of fibre orientations with a preferential bedding orientation, generating strength anisotropy of the composite's response under loading. While demonstrating the potential application of X-ray tomography to the analysis of fibre-reinforced soils, this paper provides for the first time a direct experimental description of the three-dimensional architecture of the fibres induced by the laboratory sample fabrication method. Miniature fibre reinforced sand samples were produced using two widely used laboratory sample fabrication techniques: the moist tamp-ing and the moist vibration. It is shown that both laboratory fabrication methods create anisotropic fibre orientation with preferential sub-horizontal directions. The fibre orientation distribution does not seem to be affected by the concentration of fibres, at least for the fibre concentrations considered in this study and, for both fabrication methods, the fibre orientation distribution appears to be axisymmetric with respect to the vertical axis of the sample. The X-ray analysis also demonstrates the presence of an increased porosity in the fibre vicinity, which confirms the assumption of the "stolen void ratio" effect adopted in previous constitutive modelling. A fibre orientation distribution function is tested B E. Ibraim and a combined experimental and analytical method for fibre orientation determination is further validated

Tuberculosis incidence in foreign-born people residing in European countries in 2020.

BackgroundEuropean-specific policies for tuberculosis (TB) elimination require identification of key populations that benefit from TB screening.AimWe aimed to identify groups of foreign-born individuals residing in European countries that benefit most from targeted TB prevention screening.MethodsThe Tuberculosis Network European Trials group collected, by cross-sectional survey, numbers of foreign-born TB patients residing in European Union (EU) countries, Iceland, Norway, Switzerland and the United Kingdom (UK) in 2020 from the 10 highest ranked countries of origin in terms of TB cases in each country of residence. Tuberculosis incidence rates (IRs) in countries of residence were compared with countries of origin.ResultsData on 9,116 foreign-born TB patients in 30 countries of residence were collected. Main countries of origin were Eritrea, India, Pakistan, Morocco, Romania and Somalia. Tuberculosis IRs were highest in patients of Eritrean and Somali origin in Greece and Malta (both > 1,000/100,000) and lowest among Ukrainian patients in Poland (3.6/100,000). They were mainly lower in countries of residence than countries of origin. However, IRs among Eritreans and Somalis in Greece and Malta were five times higher than in Eritrea and Somalia. Similarly, IRs among Eritreans in Germany, the Netherlands and the UK were four times higher than in Eritrea.ConclusionsCountry of origin TB IR is an insufficient indicator when targeting foreign-born populations for active case finding or TB prevention policies in the countries covered here. Elimination strategies should be informed by regularly collected country-specific data to address rapidly changing epidemiology and associated risks

Glycoinositolphospholipids from Leishmania braziliensis and L. infantum: Modulation of Innate Immune System and Variations in Carbohydrate Structure

The essential role of the lipophosphoglycan (LPG) of Leishmania in innate immune response has been extensively reported. However, information about the role of the LPG-related glycoinositolphospholipids (GIPLs) is limited, especially with respect to the New World species of Leishmania. GIPLs are low molecular weight molecules covering the parasite surface and are similar to LPG in sharing a common lipid backbone and a glycan motif containing up to 7 sugars. Critical aspects of their structure and functions are still obscure in the interaction with the vertebrate host. In this study, we evaluated the role of those molecules in two medically important South American species Leishmania infantum and L. braziliensis, causative agents of visceral (VL) and cutaneous Leishmaniasis (CL), respectively. GIPLs derived from both species did not induce NO or TNF-α production by non-primed murine macrophages. Additionally, primed macrophages from mice (BALB/c, C57BL/6, TLR2−/− and TLR4−/−) exposed to GIPLs from both species, with exception to TNF-α, did not produce any of the cytokines analyzed (IL1-β, IL-2, IL-4, IL-5, IL-10, IL-12p40, IFN-γ) or p38 activation. GIPLs induced the production of TNF-α and NO by C57BL/6 mice, primarily via TLR4. Pre incubation of macrophages with GIPLs reduced significantly the amount of NO and IL-12 in the presence of IFN-γ or lipopolysaccharide (LPS), which was more pronounced with L. braziliensis GIPLs. This inhibition was reversed after PI-specific phospholipase C treatment. A structural analysis of the GIPLs showed that L. infantum has manose rich GIPLs, suggestive of type I and Hybrid GIPLs while L. braziliensis has galactose rich GIPLs, suggestive of Type II GIPLs. In conclusion, there are major differences in the structure and composition of GIPLs from L. braziliensis and L. infantum. Also, GIPLs are important inhibitory molecules during the interaction with macrophages

Rifapentine access in Europe: growing concerns over key tuberculosis treatment component

[No abstract available]Support statement: C. Lange is supported by the German Center of Infection Research (DZIF). All other authors have no funding to declare for this study. Funding information for this article has been deposited with the Crossref Funder Registry

Isotopic techniques to measure N2O, N2 and their sources

GHG emissions are usually the result of several simultaneous processes. Furthermore, some gases such as N2 are very difficult to quantify and require special techniques. Therefore, in this chapter, the focus is on stable isotope methods. Both natural abundance techniques and enrichment techniques are used. Especially in the last decade, a number of methodological advances have been made. Thus, this chapter provides an overview and description of a number of current state-of-theart techniques, especially techniques using the stable isotope 15N. Basic principles and recent advances of the 15N gas flux method are presented to quantify N2 fluxes, but also the latest isotopologue and isotopomer methods to identify pathways for N2O production. The second part of the chapter is devoted to 15N tracing techniques, the theoretical background and recent methodological advances. A range of different methods is presented from analytical to numerical tools to identify and quantify pathway-specific N2O emissions. While this chapter is chiefly concerned with gaseous N emissions, a lot of the techniques can also be applied to other gases such as methane (CH4), as outlined in Sect. 5.3

Diretriz sobre Diagnóstico e Tratamento da Cardiomiopatia Hipertrófica – 2024

Hypertrophic cardiomyopathy (HCM) is a form of genetically caused heart muscle disease, characterized by the thickening of the ventricular walls. Diagnosis requires detection through imaging methods (Echocardiogram or Cardiac Magnetic Resonance) showing any segment of the left ventricular wall with a thickness > 15 mm, without any other probable cause. Genetic analysis allows the identification of mutations in genes encoding different structures of the sarcomere responsible for the development of HCM in about 60% of cases, enabling screening of family members and genetic counseling, as an important part of patient and family management. Several concepts about HCM have recently been reviewed, including its prevalence of 1 in 250 individuals, hence not a rare but rather underdiagnosed disease. The vast majority of patients are asymptomatic. In symptomatic cases, obstruction of the left ventricular outflow tract (LVOT) is the primary disorder responsible for symptoms, and its presence should be investigated in all cases. In those where resting echocardiogram or Valsalva maneuver does not detect significant intraventricular gradient (> 30 mmHg), they should undergo stress echocardiography to detect LVOT obstruction. Patients with limiting symptoms and severe LVOT obstruction, refractory to beta-blockers and verapamil, should receive septal reduction therapies or use new drugs inhibiting cardiac myosin. Finally, appropriately identified patients at increased risk of sudden death may receive prophylactic measure with implantable cardioverter-defibrillator (ICD) implantation.La miocardiopatía hipertrófica (MCH) es una forma de enfermedad cardíaca de origen genético, caracterizada por el engrosamiento de las paredes ventriculares. El diagnóstico requiere la detección mediante métodos de imagen (Ecocardiograma o Resonancia Magnética Cardíaca) que muestren algún segmento de la pared ventricular izquierda con un grosor > 15 mm, sin otra causa probable. El análisis genético permite identificar mutaciones en genes que codifican diferentes estructuras del sarcómero responsables del desarrollo de la MCH en aproximadamente el 60% de los casos, lo que permite el tamizaje de familiares y el asesoramiento genético, como parte importante del manejo de pacientes y familiares. Varios conceptos sobre la MCH han sido revisados recientemente, incluida su prevalencia de 1 entre 250 individuos, por lo tanto, no es una enfermedad rara, sino subdiagnosticada. La gran mayoría de los pacientes son asintomáticos. En los casos sintomáticos, la obstrucción del tracto de salida ventricular izquierdo (TSVI) es el trastorno principal responsable de los síntomas, y su presencia debe investigarse en todos los casos. En aquellos en los que el ecocardiograma en reposo o la maniobra de Valsalva no detecta un gradiente intraventricular significativo (> 30 mmHg), deben someterse a ecocardiografía de esfuerzo para detectar la obstrucción del TSVI. Los pacientes con síntomas limitantes y obstrucción grave del TSVI, refractarios al uso de betabloqueantes y verapamilo, deben recibir terapias de reducción septal o usar nuevos medicamentos inhibidores de la miosina cardíaca. Finalmente, los pacientes adecuadamente identificados con un riesgo aumentado de muerte súbita pueden recibir medidas profilácticas con el implante de un cardioversor-desfibrilador implantable (CDI).A cardiomiopatia hipertrófica (CMH) é uma forma de doença do músculo cardíaco de causa genética, caracterizada pela hipertrofia das paredes ventriculares. O diagnóstico requer detecção por métodos de imagem (Ecocardiograma ou Ressonância Magnética Cardíaca) de qualquer segmento da parede do ventrículo esquerdo com espessura > 15 mm, sem outra causa provável. A análise genética permite identificar mutações de genes codificantes de diferentes estruturas do sarcômero responsáveis pelo desenvolvimento da CMH em cerca de 60% dos casos, permitindo o rastreio de familiares e aconselhamento genético, como parte importante do manejo dos pacientes e familiares. Vários conceitos sobre a CMH foram recentemente revistos, incluindo sua prevalência de 1 em 250 indivíduos, não sendo, portanto, uma doença rara, mas subdiagnosticada. A vasta maioria dos pacientes é assintomática. Naqueles sintomáticos, a obstrução do trato de saída do ventrículo esquerdo (OTSVE) é o principal distúrbio responsável pelos sintomas, devendo-se investigar a sua presença em todos os casos. Naqueles em que o ecocardiograma em repouso ou com Manobra de Valsalva não detecta gradiente intraventricular significativo (> 30 mmHg), devem ser submetidos à ecocardiografia com esforço físico para detecção da OTSVE.   Pacientes com sintomas limitantes e grave OTSVE, refratários ao uso de betabloqueadores e verapamil, devem receber terapias de redução septal ou uso de novas drogas inibidoras da miosina cardíaca. Por fim, os pacientes adequadamente identificados com risco aumentado de morta súbita podem receber medida profilática com implante de cardiodesfibrilador implantável (CDI)