57,874 research outputs found
Recommended from our members
Irresistible force? Pressures for change in English speculative housing
Stability and control characteristics for the inner mold line configuration of the space shuttle orbiter (OA110)
Experimental aerodynamic investigations were conducted on a sting mounted 0.0405-scale representation of the -140A/B inner mold line (IML) space shuttle orbiter in 7.75 x 11 foot low speed wind tunnel, during the time period from 18 March 1974 to 20 March 1974. The primary test objectives were to establish basic longitudinal and lateral-directional stability and control characteristics for the IML orbiter. Additional configurations investigated were sealed elevon hingeline gaps, sealed rudder split line and hingeline gaps, larger radius leading edge on the vertical tail, and sealed speedbrake base. Aerodynamic force and moment data for the orbiter were measured in the body-axis system by an internally mounted, six-component strain gage balance. The model was sting mounted with the center of rotation located at approximately the wing trailing edge. The nominal angle of attack range was from -4 to +30 degrees. Yaw polars were recorded over a nominal yaw angle range from -14 to +14 degrees at constant angles of attack of 0, + or - 5, 10, 15 and 20 degrees
On-line privacy behavior: using user interfaces for salient factors
The problem of privacy in social networks is well documented within literature; users have privacy concerns however, they consistently disclose their sensitive information and leave it open to unintended third parties. While numerous causes of poor behaviour have been suggested by research the role of the User Interface (UI) and the system itself is underexplored. The field of Persuasive Technology would suggest that Social Network Systems persuade users to deviate from their normal or habitual behaviour. This paper makes the case that the UI can be used as the basis for user empowerment by informing them of their privacy at the point of interaction and reminding them of their privacy needs. The Theory of Planned Behaviour is introduced as a potential theoretical foundation for exploring the psychology behind privacy behaviour as it describes the salient factors that influence intention and action. Based on these factors of personal attitude, subjective norms and perceived control, a series of UIs are presented and implemented in controlled experiments examining their effect on personal information disclosure. This is combined with observations and interviews with the participants. Results from this initial, pilot experiment suggest groups with privacy salient information embedded exhibit less disclosure than the control group. This work reviews this approach as a method for exploring privacy behaviour and proposes further work required
Process for synthesizing and formulating condensed ring polymers
Chemical process for forming low molecular weight, fully cyclized heteroaromatic prepolymers under conditions which limit chain extension or branching is described. Exact procedures used in conducting chemical reaction are defined. Advantages of process over conventional methods are presented
Radiative transfer of synchrotron radiation through a compressed random magnetic field
The generally low polarization levels present in extragalactic radio sources suggest magnetic fields that are largely turbulent, presumably maintained by turbulence motion of the underlying plasma. The polarization of radio emission is often generated as the plasma is compressed by shock waves, and this type of configuration has been widely applied, from the cores of AGN to the lobes of classical double radio sources. Here we note that, in the absence of Faraday rotation, the synchrotron radiative transfer equations for such a configuration, separate, leading to relatively simple solutions for opaque or partially opaque sources. Expressions for the emission and absorption coefficients are derived, and, although in general, these must be evaluated numerically, the process is much simpler than a full numerical solution of the transfer equations
Tidal stability of giant molecular clouds in the Large Magellanic Cloud
Star formation does not occur until the onset of gravitational collapse
inside giant molecular clouds. However, the conditions that initiate cloud
collapse and regulate the star formation process remain poorly understood.
Local processes such as turbulence and magnetic fields can act to promote or
prevent collapse. On larger scales, the galactic potential can also influence
cloud stability and is traditionally assessed by the tidal and shear effects.
In this paper, we examine the stability of giant molecular clouds (GMCs) in the
Large Magellanic Cloud (LMC) against shear and the galactic tide using CO data
from the Magellanic Mopra Assessment (MAGMA) and rotation curve data from the
literature. We calculate the tidal acceleration experienced by individual GMCs
and determine the minimum cloud mass required for tidal stability. We also
calculate the shear parameter, which is a measure of a clouds susceptibility to
disruption via shearing forces in the galactic disk. We examine whether there
are correlations between the properties and star forming activity of GMCs and
their stability against shear and tidal disruption. We find that the GMCs are
in approximate tidal balance in the LMC, and that shear is unlikely to affect
their further evolution. GMCs with masses close to the minimal stable mass
against tidal disruption are not unusual in terms of their mass, location, or
CO brightness, but we note that GMCs with large velocity dispersion tend to be
more sensitive to tidal instability. We also note that GMCs with smaller radii,
which represent the majority of our sample, tend to more strongly resist tidal
and shear disruption. Our results demonstrate that star formation in the LMC is
not inhibited by to tidal or shear instability.Comment: 18 pages, 10 Figures, Accepted in PAS
Method for forming pyrrone molding powders and products of said method
The formation of pyrrone resins of the ladder or semiladder structure is described. The technique involves initial formation of fully cyclized prepolymers having an average degree of polymerization of about 1.5, one with acidic terminal groups, another with amine terminal groups. Thereafter the prepolymers are intimately admixed on a 1:1 stoichiometric basis. The resulting powder mixture is molded at elevated pressures and temperatures to form a fully cyclized resin
Cost effective power amplifiers for pulsed NMR sensors
Sensors that measure magnetic resonance relaxation times are increasingly finding applications in areas such as food and drink authenticity and waste water treatment control. Modern permanent magnets are used to provide the static magnetic field in many commercial instruments and advances in electronics, such as field programmable gate arrays, have provided lower cost console electronics for generating and detecting the pulse sequence. One area that still remains prohibitively expensive for many sensor applications of pulsed NMR is the requirement for a high frequency power amplifier. With many permanent magnet sensors providing a magnetic field in the 0.25T to 0.5T range, a power amplifier that operates in the 10MHz to 20MHz rage is required. In this work we demonstrate that some low cost commercial amplifiers can be used, with minor modification, to operate as pulsed NMR power amplifiers. We demonstrate two amplifier systems, one medium power that can be constructed for less than Euro 100 and a second much high power system that produces comparable results to commercial pulse amplifiers that are an order of magnitude more expensive. Data is presented using both the commercial NMR MOUSE and a permanent magnet system used for monitoring the clog state of constructed wetlands
- …