1,940 research outputs found

    Efficient unstructured mesh generation for marine renewable energy applications

    Get PDF
    Renewable energy is the cornerstone of preventing dangerous climate change whilst maintaining a robust energy supply. Tidal energy will arguably play a critical role in the renewable energy portfolio as it is both predictable and reliable, and can be put in place across the globe. However, installation may impact the local and regional ecology via changes in tidal dynamics, sediment transport pathways or bathymetric changes. In order to mitigate these effects, tidal energy devices need to be modelled in order to predict hydrodynamic changes. Robust mesh generation is a fundamental component required for developing simulations with high accuracy. However, mesh generation for coastal domains can be an elaborate procedure. Here, we describe an approach combining mesh generators with Geographical Information Systems. We demonstrate robustness and efficiency by constructing a mesh with which to examine the potential environmental impact of a tidal turbine farm installation in the Orkney Islands. The mesh is then used with two well-validated ocean models, to compare their flow predictions with and without a turbine array. The results demonstrate that it is possible to create an easy-to-use tool to generate high-quality meshes for combined coastal engineering, here tidal turbines, and coastal ocean simulations

    Fluorescence spectra and elastic scattering characteristics of atmospheric aerosol in Las Cruces, New Mexico, USA: Variability of concentrations and possible constituents and sources of particles in various spectral clusters

    Get PDF
    The UV-excited laser-induced-fluorescence (UV-LIF) spectra of single atmospheric particles and the three-band integrating-nephelometer elastic scattering of atmospheric aerosol were measured during four approximately 24-h periods on May 2007 in Las Cruces, New Mexico, USA. Aerosol scattering measurements in the nephelometer red channel (50-nm band centered at 700-nm) ranged from around 3e10 times the molecular (Rayleigh) scattering background. On average 22.8% of particles with size greater than about 1 μm diameter have fluorescence above a preset fluorescence threshold. A hierarchical cluster analysis indicates that most of the single-particle UV-LIF spectra fall into about 10 categories (spectral clusters) as found previously at other geographic sites (Pinnick et al., 2004; Pan et al., 2007). The clusters include spectra characteristic of various humic/fulvic acids, humic-like-substances (HULIS), chemically aged terpenes, fungal spores, polycyclic aromatic hydrocarbons, bacteria, cellulose/ pollens, and mixtures of various organic carbon compounds. By far the most populated cluster category is similar to those of chemically aged terpenes/humic-materials; on average this population comprises about 62% of fluorescent particles. Clusters with spectra similar to that of some HULIS aerosol contain on average 10.0% of particles; those characteristic of some fungal spores (or perhaps mixtures of aromatic organic compounds) 8.4% of particles; bacteria-like spectra 1.6% of particles; and cellulose/pollen-like spectra 0.8% of particles. Measurements of fluorescent particles over relatively short (24 min) periods reveal that the concentrations of particles in the most populated clusters are highly correlated, suggesting that the particles populating them derive from the same region; these particles might be composed of crustal material coated with secondary organic carbon. On the other hand, concentrations of particles having cellulose-like spectra are generally uncorrelated with those in any other cluster. No clear distinction in fluorescent aerosol characteristics can be seen for different air mass trajectories arriving at the sampling site, suggesting that fluorescent aerosol particles are primarily of local origin. Integrations of the single-particle UV-LIF spectra over approximate 24 h time intervals reveal two broad peaks around 350 nm and 450 nm (for 263 nm excitation); the 450 nm peak is somewhat similar to that measured previously for water soluble organic carbon derived from aerosol collections. The 350 nm peak apparently has not been seen before in measurements of aerosol collections and may derive from nonsoluble primary biological aerosol particles such as fungal spores. Further measurements are needed to investigate in more detail the generality of these results

    Crystal chemistry search of multiferroics with the stereochemically active lone pair

    Full text link
    On the basis of our previous studies of magnetoelectric ordering of BiFeO3, TbMnO3, TbMn2O5 and BiMn2O5 we formulate the crystal chemistry criteria for the search of multiferroics and reveal potential multiferroics Pb2Cu(OH)4Cl2, Pb5Cr3F19, Mn(SeO3){\dot}H2O and BiPbSr2MnO6 each containing the ion with a lone pair.Comment: 4 pages, 8 figures,submitted to J Supercond Nov Mag

    Prevent Stormwater Pollution

    Get PDF
    Storm water runoff occurs when rain flows over the ground. Surfaces like driveways, buildings, sidewalks and streets prevent storm water runoff from soaking into the ground. Storm water can pick up trash, chemicals, dirt and other pollutants and flow into a storm sewer or directly into a lake, river or wetland.This brochure discusses storm water runoff and what you can do to lessen storm water pollution

    Subsurface Flows in and Around Active Regions with Rotating and Non-rotating Sunspots

    Full text link
    The temporal variation of the horizontal velocity in subsurface layers beneath three different types of active regions is studied using the technique of ring diagrams. In this study, we select active regions (ARs) 10923, 10930, 10935 from three consecutive Carrington rotations: AR 10930 contains a fast-rotating sunspot in a strong emerging active region while other two have non-rotating sunspots with emerging flux in AR 10923 and decaying flux in AR 10935. The depth range covered is from the surface to about 12 Mm. In order to minimize the influence of systematic effects, the selection of active and quiet regions is made so that these were observed at the same heliographic locations on the solar disk. We find a significant variation in both components of the horizontal velocity in active regions as compared to quiet regions. The magnitude is higher in emerging-flux regions than in the decaying-flux region, in agreement with earlier findings. Further, we clearly see a significant temporal variation in depth profiles of both zonal and meridional flow components in AR 10930, with the variation in the zonal component being more pronounced. We also notice a significant influence of the plasma motion in areas closest to the rotating sunspot in AR 10930 while areas surrounding the non-rotating sunspots in all three cases are least affected by the presence of the active region in their neighborhood.Comment: Solar Physics (in press), includes 11 figure

    Stringent constraints on the scalar K pi form factor from analyticity, unitarity and low-energy theorems

    Get PDF
    We investigate the scalar K pi form factor at low energies by the method of unitarity bounds adapted so as to include information on the phase and modulus along the elastic region of the unitarity cut. Using at input the values of the form factor at t=0 and the Callan-Treiman point, we obtain stringent constraints on the slope and curvature parameters of the Taylor expansion at the origin. Also, we predict a quite narrow range for the higher order ChPT corrections at the second Callan-Treiman point.Comment: 5 pages latex, uses EPJ style files, 3 figures, replaced with version accepted by EPJ

    Vortex Rings in two Component Bose-Einstein Condensates

    Full text link
    We study the structure of the vortex core in two-component Bose-Einstein condensates. We demonstrate that the order parameter may not vanish and the symmetry may not be restored in the core of the vortex. In this case such vortices can form vortex rings known as vortons in particle physics literature. In contrast with well-studied superfluid 4He^4He, where similar vortex rings can be stable due to Magnus force only if they move, the vortex rings in two-component BECs can be stable even if they are at rest. This beautiful effect was first discussed by Witten in the cosmic string context, where it was shown that the stabilization occurs due to condensation of the second component of the field in the vortex core. This second condensate trapped in the core may carry a current along the vortex ring counteracting the effect of string tension that causes the loop to shrink. We speculate that such vortons may have been already observed in the laboratory. We also speculate that the experimental study of topological structures in BECs can provide a unique opportunity to study cosmology and astrophysics by doing laboratory experiments.Comment: 21 pages, 2 figure

    INDEPENDENT ACCOUNTANT'S REPORT ON APPLYING AGREED-UPON PROCEDURES

    Get PDF
    The Medicaid Audits Section of the South Carolina Office of the State Auditor performs audits and reviews of cost reports filed by institutional providers of Medicaid services. These cost reports are used by the Health and Human Services Finance Commission to establish amounts to be paid to these providers for services provided to qualified Medicaid recipients. This report deals with White Oak Manor in Rock Hill, S.C

    The trade-off between tidal-turbine array yield and impact on flow: A multi-objective optimisation problem

    Get PDF
    Abstract This paper introduces a new approach for investigating trade-offs between different societal objectives in the design of tidal-turbine arrays. This method is demonstrated through the trade-off between the yield of an array, and the extent to which that array alters the flow. This is posed as a multi-objective optimisation problem, and the problem is investigated using the array layout optimisation tool OpenTidalFarm. Motivated by environmental concerns, OpenTidalFarm is adapted to not only maximise array yield but also to minimise the effect of the array upon the hydrodynamics of the region, specifically the flow velocity. A linear scalarisation of the multi-objective optimisation problem is solved for a series of different weightings of the two conflicting objectives. Two idealised test scenarios are evaluated and in each case a set of Pareto solutions is found. These arrays are assessed for the power they generate and the severity of change they cause in the flow velocity. These analyses allow for the identification of trade-offs between these two objectives, while the methods proposed can similarly be applied to the two key societal objectives of energy production and conservation, thus providing information that could be valuable to stakeholders and policymakers when making decisions on array design
    corecore