1,779 research outputs found
Terahertz wave transmission in flexible polystyrene-lined hollow metallic waveguides for the 2.5-5 THz band.
A low-loss and low-dispersive optical-fiber-like hybrid HE11 mode is developed within a wide band in metallic hollow waveguides if their inner walls are coated with a thin dielectric layer. We investigate terahertz (THz) transmission losses from 0.5 to 5.5 THz and bending losses at 2.85 THz in a polystyrene-lined silver waveguides with core diameters small enough (1 mm) to minimize the number of undesired modes and to make the waveguide flexible, while keeping the transmission loss of the HE11 mode low. The experimentally measured loss is below 10 dB/m for 2 < ? < 2.85 THz (∼4-4.5 dB/m at 2.85 THz) and it is estimated to be below 3 dB/m for 3 < ? < 5 THz according to the numerical calculations. At ∼1.25 THz, the waveguide shows an absorption peak of ∼75 dB/m related to the transition between the TM11-like mode and the HE11 mode. Numerical modeling reproduces the measured absorption spectrum but underestimates the losses at the absorption peak, suggesting imperfections in the waveguide walls and that the losses can be reduced further. © 2013 Optical Society of America
Investigation of hollow cylindrical metal terahertz waveguides suitable for cryogenic environments
The field of terahertz (THz) waveguides continues to grow rapidly, with many being tailored to suit the specific demands of a particular final application. Here, we explore waveguides capable of enabling efficient and accurate power delivery within cryogenic environments (< 4 K). The performance of extruded hollow cylindrical metal waveguides made of un-annealed and annealed copper, as well as stainless steel, have been investigated for bore diameters between 1.75 - 4.6 mm, and at frequencies of 2.0, 2.85 and 3.4 THz, provided by a suitable selection of THz quantum cascade lasers. The annealed copper resulted in the lowest transmission losses, < 3 dB/m for a 4.6 mm diameter waveguide, along with 90° bending losses as low as ~2 dB for a bend radius of 15.9 mm. The observed trends in losses were subsequently analyzed and related to measured inner surface roughness parameters. These results provide a foundation for the development of a wide array of demanding low-temperature THz applications, and enabling the study of fundamental physics.Engineering and Physical Sciences Research Council (Grant No. EP/J017671/1, Coherent Terahertz Systems)
Utilizing BD MAXâ„¢ Enteric Bacterial Panel to Detect Stool Pathogens from Rectal Swabs
Preliminary Report of Three-Dimensional Reconstructive Intraoperative C-Arm in Percutaneous Vertebroplasty
Objective: Percutaneous vertebroplasty (PVP) is usually carried out under three-dimensional (2D) fluoroscopic guidance. However, operative complications or bone cement distribution might be difficult to assess on the basis of only 2D radiographic projection images. We evaluated the feasibility of performing an intraoperative and postoperative examination in patients undergoing PVP by using three-dimensional (3D) reconstructive C-arm. Methods: Standard PVP procedures were performed on 14 consecutive patients by using a Siremobil Iso-C 3D and a multidetector computed tomography machine. Post-processing of acquired volumetric datasets included multiplanar reconstruction (MPR) and surface shaded display (SSD). We analyzed intraoperative and immediate postoperative evaluation of the needle trajectory and bone cement distribution. Results: The male: female ratio was 2: 12; mean age of patients, 70 (range, 77-54) years; and mean T score,-3.4. The mean operation time was 52.14 min, but the time required to perform and post-process the rotational acquisitions was 7.76 min. The detection of bone cement distribution and leakage after PVP by using MPR and SSD was possible in all patients. However, detection of the safe trajectory for needle insertion was not possible. Conclusion: 3D rotational image acquisition can enable intra- or post-procedural assessment of vertebroplasty procedures for the detection of bone cement distribution and leakage. However, it is difficult to assess the safe trajectory for needle insertion. Key Words: Vertebroplasty · Intraoperative 3D imaging · Complication · Feasibility
Screening and early psychological intervention for depression in schools: systematic review and meta-analysis.
Abstract Depression in children and adolescents is considerably undertreated, and the school may be a good setting for identifying and treating depression. We conducted a meta-analysis of studies in which students were screened for depression, and those with depressive symptoms were treated with a psychological intervention. Only randomised controlled trials were included. Eight studies met the inclusion criteria. Five studies focused on younger children (7–14 years) and three studies were aimed at adolescents (12–19 years). In total 5803 students were screened, of whom 7.2% were included in the intervention studies (95% CI: 7.1–7.3). The ‘numbers-needed-to-screen’ was 31 (95% CI: 27–32), which means that 31 students had to be screened in order to generate one successfully treated case of depression. The effects of the psychological treatments at posttest were compared to control conditions in the 8 studies comprising 12 contrast groups, with a total of 413 students. The mean effect size was 0.55 (95% CI: 0.35– 0.76). There were not enough studies to examine whether specific psychotherapies were superior to other psychotherapies. Although the number of studies is small and their quality is limited, screening and early intervention at schools may be an effective strategy to reduce the burden of disease from depression in children and adolescents. More research on the (negative) effects of these interventions is needed
Capture the fracture: a best practice framework and global campaign to break the fragility fracture cycle
Summary
The International Osteoporosis Foundation (IOF) Capture the Fracture Campaign aims to support implementation of Fracture Liaison Services (FLS) throughout the world.
Introduction
FLS have been shown to close the ubiquitous secondary fracture prevention care gap, ensuring that fragility fracture sufferers receive appropriate assessment and intervention to reduce future fracture risk.
Methods
Capture the Fracture has developed internationally endorsed standards for best practice, will facilitate change at the national level to drive adoption of FLS and increase awareness of the challenges and opportunities presented by secondary fracture prevention to key stakeholders. The Best Practice Framework (BPF) sets an international benchmark for FLS, which defines essential and aspirational elements of service delivery.
Results
The BPF has been reviewed by leading experts from many countries and subject to beta-testing to ensure that it is internationally relevant and fit-for-purpose. The BPF will also serve as a measurement tool for IOF to award ‘Capture the Fracture Best Practice Recognition’ to celebrate successful FLS worldwide and drive service development in areas of unmet need. The Capture the Fracture website will provide a suite of resources related to FLS and secondary fracture prevention, which will be updated as new materials become available. A mentoring programme will enable those in the early stages of development of FLS to learn from colleagues elsewhere that have achieved Best Practice Recognition. A grant programme is in development to aid clinical systems which require financial assistance to establish FLS in their localities.
Conclusion
Nearly half a billion people will reach retirement age during the next 20Â years. IOF has developed Capture the Fracture because this is the single most important thing that can be done to directly improve patient care, of both women and men, and reduce the spiralling fracture-related care costs worldwide.</p
The effect of regulatory scrutiny: Asymmetric cost pass-through in power wholesale and its end
Planetary Dynamics and Habitable Planet Formation In Binary Star Systems
Whether binaries can harbor potentially habitable planets depends on several
factors including the physical properties and the orbital characteristics of
the binary system. While the former determines the location of the habitable
zone (HZ), the latter affects the dynamics of the material from which
terrestrial planets are formed (i.e., planetesimals and planetary embryos), and
drives the final architecture of the planets assembly. In order for a habitable
planet to form in a binary star system, these two factors have to work in
harmony. That is, the orbital dynamics of the two stars and their interactions
with the planet-forming material have to allow terrestrial planet formation in
the habitable zone, and ensure that the orbit of a potentially habitable planet
will be stable for long times. We have organized this chapter with the same
order in mind. We begin by presenting a general discussion on the motion of
planets in binary stars and their stability. We then discuss the stability of
terrestrial planets, and the formation of potentially habitable planets in a
binary-planetary system.Comment: 56 pages, 29 figures, chapter to appear in the book: Planets in
Binary Star Systems (Ed. N. Haghighipour, Springer publishing company
Exoplanet phase curves: observations and theory
Phase curves are the best technique to probe the three dimensional structure
of exoplanets' atmospheres. In this chapter we first review current exoplanets
phase curve observations and the particular challenges they face. We then
describe the different physical mechanisms shaping the atmospheric phase curves
of highly irradiated tidally locked exoplanets. Finally, we discuss the
potential for future missions to further advance our understanding of these new
worlds.Comment: Fig.5 has been updated. Table 1 and corresponding figures have been
updated with new values for WASP-103b and WASP-18b. Contains a table
sumarizing phase curve observation
- …