Integrating photovoltaic cells into decorative architectural glass using traditonal glasspainting techniques and fluorescent dyes

Photovoltaic cells can be integrated into decorative glass, providing a showcase for this renewable technology, whilst assisting in the creation of sustainable architecture through generation of electricity from the building surface. However, traditional, opaque, square, crystalline-silicon solar cells contrast strongly with their surroundings when incorporated into translucent, coloured glazing. Methods of blending photovoltaic cells into their surroundings were developed, using traditional glass painting techniques. A design was created in which opaque paint was applied to the areas of glass around underlying photovoltaic cells. Translucent, platinum paint was used on the glass behind the photovoltaic cells. This covered the grey cell backs whilst reflecting light and movement. The platinum paint was shown to cause a slight increase in power produced by photovoltaic cells placed above it. To add colour, very small amounts of Lumogen F dye (BASF) were incorporated into a silicone encapsulant (Dow Corning, Sylgard 184), which was then used hold photovoltaic cells in place between sheets of painted glass. Lumogen dyes selectively absorb and emit light, giving a good balance between colour addition and electricity production from underlying photovoltaic cells. When making sufficient quantities of dyed encapsulant for a 600 x 450 mm test piece, the brightness of the dye colours faded, and fluorescence decreased, although some colour was retained. Improvement of the method, including testing of alternative encapsulant materials, is required, to ensure that the dyes continue to fluoresce within the encapsulant. In contrast, the methods of adding opacity variation to glass, through use of glass painting, are straightforward to develop for use in a wide variety of photovoltaic installations. Improvement of these methods opens up a wide variety of architectural glass design opportunities with integrated photovoltaics, providing an example of one new medium to make eco-architecture more aesthetically pleasing, whilst generating electricity

Generating electricity with decorative glazing

Dorothy Hardy, research fellow in manufacturing of functional electronic textiles in the Advanced Textiles Research Group at Nottingham Trent University, explains how using solar cells in glazing designs can generate electricity

Creative use of BIPV materials: barriers and solutions

Inventive use of photovoltaic (PV) materials in architecture can be developed through use of PV in artworks. This is particularly important in increasing the uptake of building-integrated building-integrated photovoltaics (BIPV), by developing novel methods of combining and installing PV materials. Current examples of PV artwork and design are examined, from small to large scale, to assess the current design limitations. The design of two PV artworks is discussed in detail, including an artwork that uses the principle of the luminescent solar concentrator (LSC), to show the way in which design hurdles are discovered and overcome. Challenges range from difficulties in obtaining small quantities of PV materials; the balance between efficiency and artistic effect; through to technical and siting issues that an artist must address when designing a functional PV structure. Methods of overcoming these barriers are explored, including the use of lumogen dyes in encapsulant materials

A silicone host for Lumogen dyes

Altering the encapsulant colour in photovoltaic (PV) modules is a straightforward way of achieving greater colour range whilst minimising additional cost in PV systems. Lumogen fluorescent, organic dyes offer a way of adding colour to the encapsulant with minimal change in efficiency. The silicone encapsulant material Sylgard 184 is tested as a host material for Lumogen dyes. A method of dissolving various Lumogen dyes in Sylgard is investigated, and limits of solubility are explored. Methods of preparing samples suitable for optical measurements are found. Optical density is measured for a range of dye concentrations. The results indicate that Lumogen dyes can be dissolved successfully within Sylgard 184, giving good optical properties for lower dye concentrations. Initial photoluminescent quantum yield measurements confirm that Lumogen dyes can function effectively within a Sylgard host. This is promising for use of this material combination in the creation of coloured, fluorescent PV encapsulant layers

The search for building-integrated PV materials with good aesthetic potential: a survey

Building-integrated photovoltaics (PV) is currently dominated by blue and black rectilinear forms. Greater variety of colour and form could lead to much better uptake of PV in the built environment, also increasing the potential for PV to be used as an artistic material. Listing the available PV technologies by colour gives a clearer picture of the current situation. An assessment of photostability, efficiency and price, for each material, indicates the materials that have the potential to fill the gaps in the colour spectrum. Use of combinations of materials that can be fabricated in different ways from the current, standardised, PV modules will further increase the possibilities for use in building integration, Extending the lifetimes of organic PV, dye-sensitised PV or luminescent solar concentrators will increase the possibilities for development of new PV products

Improving the aesthetics of photovoltaics in decorative architectural glass

Increasing colour variety in photovoltaics can improve the uptake of this renewable technology, which is vital to the creation of sustainable architecture. However, the introduction of colour into photovoltaics often involves increased cost and decreased efficiency. A method was found to add colour to photovoltaics, using luminescent materials: fluorescent organic dyes (BASF Lumogen). These selectively absorb and emit light, giving a good balance between colour addition and electricity production from underlying photovoltaic cells. Very small amounts of Lumogen dye were added to a silicone encapsulant (Dow Corning Sylgard 184), which was then used hold photovoltaic cells in place between sheets of painted glass. When making sufficient quantities of dyed encapsulant for a 600 x 450 mm testpiece, the dye colours faded, with low levels of fluorescence, although some colour was retained. Improvement of the method, including testing of alternative encapsulant materials, is required, to ensure that the dyes continue to fluoresce within the encapsulant. Although the Lumogen dyes are quite stable when compared to other dye molecules, in general organic dyes are not yet sufficiently durable to make this technology viable for installations that are to last for more than 20 years: the guaranteed lifetime of standard photovoltaic modules. Dye replenishment, or replacement of materials, will be required; or a product with a shorter ‘useful’ lifetime identified. This method opens up a wide variety of architectural glass design opportunities that incorporate photovoltaics, providing an example of one new medium to make eco-architecture more aesthetically pleasing, whilst generating electricity

Absolute single photoionization cross-sections of Br3+: Experiment and theory

Absolute single photoionization cross section measurements for Br3+ ions are reported in the photon energy range 44.79-59.54 eV at a photon energy resolution of 21 ±3 meV. Measurements were performed at the Advanced Light Source at Lawrence Berkeley National Laboratory using the merged-beams technique. Numerous resonance features in the experimental spectrum are assigned and their energies and quantum defect values are tabulated. The cross-section measurements are also compared with Breit-Pauli R-matrix calculations with suitable agreement over the photon energy range investigated. Analysis of the measured spectrum including Rydberg resonance series identifications produced a new emperical determination of the ionizational potential of Br3+ of 46.977 ± 0.050 eV, which is 805 meV lower than the most recently published value of 47.782 eV. This disparity between our determination and the earlier published value is similar to an 843 meV shift in the accepted ionization potential published for iso-electronic Se2+ as part of this same research program

Textiles illuminated with electronic yarn

Poster displayed at the IDTechEx Conference and Exhibition in Berlin, Germany, 11-12 April 2018