Method For Obtaining Wood/Bark Adhesion Measurements on Small Samples

Using the Instron Tester, a procedure has been developed for measuring wood/bark adhesion on small samples. Using very small, specially prepared samples, wood/bark adhesion measurements were made on twenty-four hardwoods and eighteen conifers. High dormant season wood/bark adhesion in hardwoods was found to be associated with the presence of fibers in the inner bark. The procedure appears to be useful in identifying difficult-to-debark species and evaluating methods of reducing adhesion

Distinguished non-Archimedean representations

For a symmetric space (G,H), one is interested in understanding the vector space of H-invariant linear forms on a representation \pi of G. In particular an important question is whether or not the dimension of this space is bounded by one. We cover the known results for the pair (G=R_{E/F}GL(n),H=GL(n)), and then discuss the corresponding SL(n) case. In this paper, we show that (G=R_{E/F}SL(n),H=SL(n)) is a Gelfand pair when n is odd. When $n$ is even, the space of H-invariant forms on \pi can have dimension more than one even when \pi is supercuspidal. The latter work is joint with Dipendra Prasad

Morphological and Bark Strength Characteristics Important to Wood/Bark Adhesion in Hardwoods

Dormant season wood/bark adhesion was determined for twenty-four hardwood species using a previously described Instron testing machine method. Wood/bark adhesion was compared, using simple and multiple correlation techniques, with bark specific gravity, inner bark strength, bark toughness, wood specific gravity, wood toughness, percent bark fibers, and percent sclereids. Wood/bark adhesion was found to be positively correlated with percent bark fibers, bark toughness, and inner bark strength. Wood/bark adhesion was negatively correlated with percent sclereids in the bark. Morphologically, it appeared that the presence of fibers increased inner bark strength, sclereids decreased inner bark strength, and inner bark strength had a major influence on wood/bark adhesion. A multiple correlation comparison employing wood toughness and inner bark strength accounted for 69% of the wood/bark adhesion encountered

Chemistry, transport and dry deposition of trace gases in the boundary layer over the tropical Atlantic Ocean and the Guyanas during the GABRIEL field campaign

We present a comparison of different Lagrangian and chemical box model calculations with measurement data obtained during the GABRIEL campaign over the tropical Atlantic Ocean and the Amazon rainforest in the Guyanas, October 2005. Lagrangian modelling of boundary layer (BL) air constrained by measurements is used to derive a horizontal gradient (≈5.6 pmol/mol km<sup>−1</sup>) of CO from the ocean to the rainforest (east to west). This is significantly smaller than that derived from the measurements (16–48 pmol/mol km<sup>−1</sup>), indicating that photochemical production from organic precursors alone cannot explain the observed strong gradient. It appears that HCHO is overestimated by the Lagrangian and chemical box models, which include dry deposition but not exchange with the free troposphere (FT). The relatively short lifetime of HCHO implies substantial BL-FT exchange. The mixing-in of FT air affected by African and South American biomass burning at an estimated rate of 0.12 h<sup>−1</sup> increases the CO and decreases the HCHO mixing ratios, improving agreement with measurements. A mean deposition velocity of 1.35 cm/s for H<sub>2</sub>O<sub>2</sub> over the ocean as well as over the rainforest is deduced assuming BL-FT exchange adequate to the results for CO. The measured increase of the organic peroxides from the ocean to the rainforest (≈0.66 nmol/mol d<sup>−1</sup>) is significantly overestimated by the Lagrangian model, even when using high values for the deposition velocity and the entrainment rate. Our results point at either heterogeneous loss of organic peroxides and/or their radical precursors, underestimated photodissociation or missing reaction paths of peroxy radicals not forming peroxides in isoprene chemistry. We calculate a mean integrated daytime net ozone production (NOP) in the BL of (0.2±5.9) nmol/mol (ocean) and (2.4±2.1) nmol/mol (rainforest). The NOP strongly correlates with NO and has a positive tendency in the boundary layer over the rainforest

Improved simulation of isoprene oxidation chemistry with the ECHAM5/MESSy chemistry-climate model: lessons from the GABRIEL airborne field campaign

The GABRIEL airborne field measurement campaign, conducted over the Guyanas in October 2005, produced measurements of hydroxyl radical (OH) concentration which are significantly higher than can be simulated using current generation models of atmospheric chemistry. Based on the hypothesis that this "missing OH" is due to an as-yet undiscovered mechanism for recycling OH during the oxidation chain of isoprene, we determine that an OH recycling of about 40–50% (compared with 5–10% in current generation isoprene oxidation mechanisms) is necessary in order for our modelled OH to approach the lower error bounds of the OH observed during GABRIEL. Such a large amount of OH in our model leads to unrealistically low mixing ratios of isoprene. In order for our modelled isoprene mixing ratios to match those observed during the campaign, we also require that the effective rate constant for the reaction of isoprene with OH be reduced by about 50% compared with the lower bound of the range recommended by IUPAC. We show that a reasonable explanation for this lower effective rate constant could be the segregation of isoprene and OH in the mixed layer. Our modelling results are consistent with a global, annual isoprene source of about 500 Tg(C) yr<sup>−1</sup>, allowing experimentally derived and established isoprene flux rates to be reconciled with global models

Moduli Stacks of Vector Bundles and Frobenius Morphisms

We describe the action of the different Frobenius morphisms on the cohomology ring of the moduli stack of algebraic vector bundles of fixed rank and determinant on an algebraic curve over a finite field in characteristic p and analyse special situations like vector bundles on the projective line and relations with infinite Grassmannians.Comment: 19 page

Crop moisture estimation over the southern Great Plains with dual polarization 1.66 centimeter passive microwave data from Nimbus 7

Moisture content of snow-free, unfrozen soil is inferred using passive microwave brightness temperatures from the scanning multichannel microwave radiometer (SMMR) on Nimbus-7. Investigation is restricted to the two polarizations of the 1.66 cm wavelength sensor. Passive microwave estimates of soil moisture are of two basic categories; those based upon soil emissivity and those based upon the polarization of soil emission. The two methods are compared and contrasted through the investigation of 54 potential functions of polarized brightness temperatures and, in some cases, ground-based temperature measurements. Of these indices, three are selected for the estimated emissivity, the difference between polarized brightness temperatures, and the normalized polarization difference. Each of these indices is about equally effective for monitoring soil moisture. Using an antecedent precipitation index (API) as ground control data, temporal and spatial analyses show that emissivity data consistently give slightly better soil moisture estimates than depolarization data. The difference, however, is not statistically significant. It is concluded that polarization data alone can provide estimates of soil moisture in areas where the emissivity cannot be inferred due to nonavailability of surface temperature data

Analysis of strain and stacking faults in single nanowires using Bragg coherent diffraction imaging

Coherent diffraction imaging (CDI) on Bragg reflections is a promising technique for the study of three-dimensional (3D) composition and strain fields in nanostructures, which can be recovered directly from the coherent diffraction data recorded on single objects. In this article we report results obtained for single homogeneous and heterogeneous nanowires with a diameter smaller than 100 nm, for which we used CDI to retrieve information about deformation and faults existing in these wires. The article also discusses the influence of stacking faults, which can create artefacts during the reconstruction of the nanowire shape and deformation.Comment: 18 pages, 6 figures Submitted to New Journal of Physic

The HERMES Back Drift Chambers

The tracking system of the HERMES spectrometer behind the bending magnet consists of two pairs of large planar 6-plane drift chambers. The design and performance of these chambers is described. This description comprises details on the mechanical and electronical design, information about the gas mixture used and its properties, results on alignment, calibration, resolution, and efficiencies, and a discussion of the experience gained through the first three years of operation.Comment: 21 pages, LaTex, 16 figures include