135 research outputs found
Forward osmosis–membrane distillation hybrid system for desalination using mixed trivalent draw solution
© 2020 Elsevier B.V. Finding suitable draw solutions is still a major problem when developing FO technologies. This study represents the first time a mixed trivalent draw solution containing of EDTA–2Na and Na3PO4 was systemically studied for FO performance. The objective here was to achieve simultaneously low reverse salt flux and high water flux. The FO results showed that the mixed trivalent draw solution-based 0.3 M EDTA–2Na and 0.55 M Na3PO4 underwent higher water flux (Jw = 9.17 L/m2⋅h) than that of pure 0.85 M EDTA-2Na (Jw = 7.02 L/m2⋅h) due to its lower viscosity. Additionally, the specific reverse salt flux caused by mixing 0.3 M EDTA–2Na with 0.55 M Na3PO4 draw solution was only 0.053 g/L using DI water as the feed solution. Donnan equilibrium force and formed complexation of [EDTANa]3-, [HPO4Na]- with the FO membrane are believed to constitute the main mechanism for minimizing salt leakage from the mixed draw solution. Moreover, the FO desalination process utilizing the mixed trivalent draw solution achieved water fluxes of 6.12 L/m2⋅h with brackish water (TDS = 5000 mg/L) and 3.10 L/m2⋅h with seawater (TDS = 35,000 mg/L) as the feed solution. Lastly, diluted mixed trivalent draw solution following the FO process was effectively separated using the MD process with salt rejection >99.99% at a mild feed temperature of 55 °C
Genomic and vaccine preclinical studies reveal a novel mouse-adapted Helicobacter pylori model for the hpEastAsia genotype in Southeast Asia
\ua9 2024 Crown Copyright.Introduction. Helicobacter pylori infection is a major global health concern, linked to the development of various gastrointestinal diseases, including gastric cancer. To study the pathogenesis of H. pylori and develop effective intervention strategies, appropriate animal pathogen models that closely mimic human infection are essential. Gap statement. This study focuses on the understudied hpEastAsia genotype in Southeast Asia, a region marked by a high H. pylori infection rate. No mouse-adapted model strains has been reported previously. Moreover, it recognizes the urgent requirement for vaccines in developing countries, where overuse of antimicrobials is fuelling the emergence of resistance. Aim. This study aims to establish a novel mouse-adapted H. pylori model specific to the hpEastAsia genotype prevalent in Southeast Asia, focusing on comparative genomic and histopathological analysis of pathogens coupled with vaccine preclinical studies. Methodology. We collected and sequenced the whole genome of clinical strains of H. pylori from infected patients in Vietnam and performed comparative genomic analyses of H. pylori strains in Southeast Asia. In parallel, we conducted preclinical studies to assess the pathogenicity of the mouse-adapted H. pylori strain and the protective effect of a new spore-vectored vaccine candidate on male Mlac:ICR mice and the host immune response in a female C57BL/6 mouse model. Results. Genome sequencing and comparison revealed unique and common genetic signatures, antimicrobial resistance genes and virulence factors in strains HP22 and HP34; and supported clarithromycin-resistant HP34 as a representation of the hpEastAsia genotype in Vietnam and Southeast Asia. HP34-infected mice exhibited gastric inflammation, epithelial erosion and dysplastic changes that closely resembled the pathology observed in human H. pylori infection. Furthermore, comprehensive immunological characterization demonstrated a robust host immune response, including both mucosal and systemic immune responses. Oral vaccination with candidate vaccine formulations elicited a significant reduction in bacterial colonization in the model. Conclusion. Our findings demonstrate the successful development of a novel mouse-adapted H. pylori model for the hpEastAsia genotype in Vietnam and Southeast Asia. Our research highlights the distinctive genotype and pathogenicity of clinical H. pylori strains in the region, laying the foundation for targeted interventions to address this global health burden
Exploration of an innovative draw solution for a forward osmosis-membrane distillation desalination process
© 2017, Springer-Verlag Berlin Heidelberg. Forward osmosis (FO) has emerged as a viable technology to alleviate the global water crisis. The greatest challenge facing the application of FO technology is the lack of an ideal draw solution with high water flux and low reverse salt flux. Hence, the objective of this study was to enhance FO by lowering reverse salt flux and maintaining high water flux; the method involved adding small concentrations of Al2(SO4)3 to a MgCl2 draw solution. Results showed that 0.5 M MgCl2 mixed with 0.05 M of Al2(SO4)3 at pH 6.5 achieved a lower reverse salt flux (0.53 gMH) than that of pure MgCl2 (1.55 gMH) using an FO cellulose triacetate nonwoven (CTA-NW) membrane. This was due possibly to the flocculation of aluminum hydroxide in the mixed draw solution that constricted membrane pores, resulting in reduced salt diffusion. Moreover, average water fluxes of 4.09 and 1.74 L/m2-h (LMH) were achieved over 180 min, respectively, when brackish water (5 g/L) and sea water (35 g/L) were used as feed solutions. Furthermore, three types of membrane distillation (MD) membranes were selected for draw solution recovery; of these, a polytetrafluoroethylene membrane with a pore size of 0.45 μm proved to be the most effective in achieving a high salt rejection (99.90%) and high water flux (5.41 LMH) in a diluted draw solution
Finding needles in haystacks: linking scientific names, reference specimens and molecular data for Fungi
DNA phylogenetic comparisons have shown that morphology-based species recognition often underestimates fungal diversity. Therefore, the need for accurate DNA sequence data, tied to both correct taxonomic names and clearly annotated specimen data, has never been greater. Furthermore, the growing number of molecular ecology and microbiome projects using high-throughput sequencing require fast and effective methods for en masse species assignments. In this article, we focus on selecting and re-annotating a set of marker reference sequences that represent each currently accepted order of Fungi. The particular focus is on sequences from the internal transcribed spacer region in the nuclear ribosomal cistron, derived from type specimens and/or ex-type cultures. Re-annotated and verified sequences were deposited in a curated public database at the National Center for Biotechnology Information (NCBI), namely the RefSeq Targeted Loci (RTL) database, and will be visible during routine sequence similarity searches with NR_prefixed accession numbers. A set of standards and protocols is proposed to improve the data quality of new sequences, and we suggest how type and other reference sequences can be used to improve identification of Fungi
Risk estimates of recurrent congenital anomalies in the UK: a population-based register study
BACKGROUND: Recurrence risks for familial congenital anomalies in successive pregnancies are known, but this information for major structural anomalies is lacking. We estimated the absolute and relative risks of recurrent congenital anomaly in the second pregnancy for women with a history of a congenital anomaly in the first pregnancy; for all major anomaly groups and subtypes.
METHODS: Population-based register data on 18,605 singleton pregnancies affected by major congenital anomaly occurring in 872,493 singleton stillbirths, live births and terminations of pregnancy for fetal anomaly were obtained from the Northern Congenital Abnormality Survey, North of England, UK, for 1985-2010. Absolute risks (ARs) and relative risks (RRs) for recurrent congenital anomaly (overall, from a similar group, from a dissimilar group) in the second pregnancy were estimated by history of congenital anomaly (overall, by group, by subtype) in the first pregnancy.
RESULTS: The estimated prevalences of congenital anomaly in first and second pregnancies were 276 (95% CI 270-281) and 163 (95% CI 159-168) per 10,000 respectively. For women whose first pregnancy was affected by congenital anomaly, the AR of recurrent congenital anomaly in the second pregnancy was 408 (95% CI 365-456) per 10,000; 2.5 (95% CI 2.3-2.8, p<0.0001) times higher than for those with unaffected first pregnancies. For similar anomalies, the recurrence risk was considerably elevated (RR=23.8, 95% CI 19.6-27.9, P<0.0001) while for dissimilar anomalies the increase was more modest (RR=1.4, 95% CI 1.2-1.6, P=0.001), although the ARs for both were 2%.
CONCLUSIONS: Absolute recurrence risks varied between 1 in 20 and 1 in 30 for most major anomaly groups. At pre-conception and antenatal counselling, women whose first pregnancy was affected by a congenital anomaly and who are planning a further pregnancy may find it reassuring that despite high relative risks, the absolute recurrence risk is relatively low
Potential collaboration with the private sector for the provision of ambulatory care in the Mekong region, Vietnam
Ultra-Sensitivity Glucose Sensor Based on Field Emitters
A new glucose sensor based on field emitter of ZnO nanorod arrays (ZNA) was fabricated. This new type of ZNA field emitter-based sensor shows high sensitivity with experimental limit of detection of 1 nM glucose solution and a detection range from 1 nM to 50 μM in air at room temperature, which is lower than that of glucose sensors based on surface plasmon resonance spectroscopy, fluorescence signal transmission, and electrochemical signal transduction. The new glucose sensor provides a key technique for promising consuming application in biological system for detecting low levels of glucose on single cells or bacterial cultures
Delays in the diagnosis and treatment of tuberculosis patients in Vietnam: a cross-sectional study
<p>Abstract</p> <p>Background</p> <p>Treatment delay is an important indicator of access to tuberculosis diagnosis and treatment. Analyses of patient delay (i.e. time interval between onset of symptoms and first consultation of a health care provider) and health care delay (i.e. time interval between first consultation and start of treatment) can inform policies to improve access. This study assesses the patient, health care provider and total delay in diagnosis and treatment of new smear-positive pulmonary tuberculosis patients, and the risk factors for long delay, in Vietnam.</p> <p>Methods</p> <p>A cross-sectional survey of new patients treated by the National Tuberculosis Control Programme was conducted in 70 randomly selected districts in Vietnam. All consecutively registered patients in one quarter of 2002 were interviewed using a pre-coded structured questionnaire.</p> <p>Results</p> <p>Median (range) delay was 4 weeks (1–48) for total, 3 (1–48) weeks for patient and 1 (0–25) week for health care delay. Patients with long total delay (≥ 12 weeks, 15%) accounted for 49% of the cumulative number of delay-weeks. Independent risk factors (p < 0.05) for long total delay were female sex, middle age, remote setting, residence in the northern or central area, and initial visit to the private sector. For long patient delay (≥ 6 weeks) this was female sex, belonging to an ethnic minority, and living at > 5 km distance from a health facility or in the northern area. For long health care delay (≥ 6 weeks) this was urban setting, residence in the central area and initial visit to a communal health post, TB hospital or the private sector.</p> <p>Conclusion</p> <p>Analyses of patient and treatment delays can indicate target groups and areas for health education and strengthening of the referral system, in particular between the private sector and the NTP.</p
Mortality and failure among tuberculosis patients who did not complete treatment in Vietnam: a cohort study
<p>Abstract</p> <p>Background</p> <p>Tuberculosis treatment failure and death rates are low in the Western Pacific Region, including Vietnam. However, failure or death may also occur among patients who did not complete treatment, i.e. reported as default or transfer-out. We aimed to assess the proportion failures and deaths among new smear-positive pulmonary tuberculosis patients with reported default or transfer-out.</p> <p>Treatment outcomes rates were 1.4% default, 3.0% transfer-out, 0.4% failure and 2.6% death in northern Vietnam in 2003.</p> <p>Methods</p> <p>Tuberculosis patients in 32 randomly selected district tuberculosis units in northern Vietnam were followed up 1 to 3 years after treatment initiation for survival, recent treatment history and bacteriologically confirmed tuberculosis.</p> <p>Results</p> <p>Included were 85 transferred patients and 42 who defaulted. No information was available of 41 (32%), 28 (22%) had died. Fifty-eight were available for follow-up (46%); all had sputum smear results. Tuberculosis was recorded in 11 (13%), including 6 (7%) with positive sputum smears, 3 (3%) with negative smears but positive culture and 2 (2%) who had started re-treatment for bacteriologically confirmed tuberculosis. Fifteen (17%, 95%CI 10–27%) had died within 8 months after treatment initiation. Of 86 patients with known study outcomes, 39 (45%, 95%CI 35–56%) had died or had bacteriologically confirmed tuberculosis. This was recorded for 29/53 (55%, 95%CI 40–68%) transferred patients and 10/33 (30%, 95%CI 16–49%) patients who defaulted.</p> <p>Conclusion</p> <p>The total failure and death rates are 0.6% and 0.8% higher than based on routine reporting in northern Vietnam. Although this was a large proportion of treatment failures and deaths, failure and death rates were low. Defaulting and transfer carry a high risk of failure and in particular death.</p
- …